User manual SANYO PLV-HD10

[. . . ] Multimedia Projector MODEL PLV-HD10 Projection lens is optional. Owner's Manual TO THE OWNER Before operating this projector, read this manual thoroughly and operate the projector properly. Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable time. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents. If your projector seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the "Trouble-shooting" section of the end of this booklet. [. . . ] When Video System is 1035i, 1080i/50 or 1080i/60, select system manually first. COMPONENT VIDEO SIGNAL FORMAT If projector cannot reproduce proper video image, it is necessary to select a specific component video signal format among 480i, 575i, 480p, 575p, 720p, 1035i , 1080i/50 or 1080i/60. Custom Mode (1~15) set in DISPLAY ADJUST Menu. Systems on this dialog box can be selected. 27 DISPLAY ADJUST DISPLAY ADJUSTMENTS SCREEN ADJUSTMENTS This projector has a picture screen resize function, which enables you to display desirable image size. 1 2 3 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to DISPLAY ADJUST Menu icon. Press POINT UP/DOWN button and move a red frame pointer to Screen and then press SELECT button. Press POINT UP/DOWN button to move a red arrow to level that you want to set and then press SELECT button. Full DISPLAY ADJUST MENU DISPLAY ADJUST Menu icon Set a red frame pointer to item and press SELECT button. Provides image to fit the horizontal size of the screen size. Anamorphic Provides image is forcibly changed to a 4:3 image, even if the input signal is HDTV. SCREEN ADJUSTMENT (DIRECT) Select screen by pressing Screen button on Remote Control Unit. Full Normal Anamorphic Aspect H Aspect V These adjust the horizontal and vertical scale and position of the screen. When a SELECT button is pressed, the mode changes to Scale or Position adjustment mode. Use the POINT LEFT/RIGHT button(s) to select whether you wish to adjust Scale or Position, and then use the POINT UP/DOWN button(s) to adjust the values. 28 DISPLAY ADJUST AUTO PC ADJUSTMENT Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to your computer. DISPLAY ADJUST MENU 1 2 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to DISPLAY ADJUST Menu icon. button on Side Control or on Remote Control Unit. DISPLAY ADJUST Menu icon Set a red frame pointer to item and press SELECT button. Store adjustment parameters. Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once parameters are memorized, setting can be done just by selecting Mode in SYSTEM SELECT Menu (P26). Refer to step 3 of MANUAL DISPLAY ADJUSTMENT section (P31). NOTE G Fine sync, Total dots and Picture Position of some computers can not be fully adjusted with this Auto PC Adjustment function. When image is not provided properly through this function, manual adjustments are required. (Refer to page 30, 31. ) G Auto PC Adjustment function cannot be operated in Digital Signal input on DVI terminal and "480i", "575i", "480p", "575p", "720p (HDTV)", "1035i (HDTV)", "1080i/50 (HDTV)" or "1080i/60 (HDTV)" is selected on SYSTEM SELECT Menu (P26). 29 DISPLAY ADJUST MANUAL DISPLAY ADJUSTMENTS This projector can automatically tune to display signals from most computers and video equipments currently distributed. However, some computers and video equipments employ special signal formats which are different from standard ones and may not be tuned by Multi-Scan system of this projector. If this happens, projector cannot reproduce a proper image and image may be recognized as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture. This projector has a Manual display adjustment to enable you to precisely adjust several parameters to match with those special signal formats. [. . . ] We will advise you how to obtain service. This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. safety standards against risk of fire, casualty and electrical hazards. The CE Mark is a Directive conformity mark of the European Community (EC). 44 APPENDIX INDICATORS AND PROJECTOR CONDITION Check the Indicators for projector condition. Indicators LAMP REPLACE yellow WARNING TEMP. red READY green LAMP red Projector Condition The projector is OFF. (The MAIN switch OFF position or the AC Power Cord is unplugged. ) The projector is READY to be turned on with the POWER ONOFF button. The projector is operating normally. The temperature inside the projector is abnormally high. [. . . ]