User manual SANYO PLC-XW65

[. . . ] Multimedia Projector MODEL PLC-XW65 PLC-XW65K Owner's Manual Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16. 77 million colors, and matrix liquid crystal display (LCD) technology. Compact Design This projector is designed compact in size and weight. Compatibility The projector widely accepts various video and computer input signals including: Computers, 6 C o l o r s y s t e m s ( PA L , S E C A M , N T S C, NTSC4. 43, PAL-M, and PAL-N), Component video, S-video and RGB scart. [. . . ] If your computer's screen resolution is higher than it, reset the resolution to the lower before connecting to the projector. · The image data in other than XGA (1024x768) is modified to fit the screen size in initial mode. · True, Full, and Digital zoom +/­ cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p. 27). 4 Computer Input Wide Provide the image to fit wide video aspect ratio (16:9) by expanding the image width uniformly. This function can be used for providing a squeezed video signal at 16:9. Custom Adjust the screen scale and position manually with this function. Press the SELECT button at Custom and the "Custom" is displayed on the screen for a few seconds and then the Aspect dialog box appears. Adjust the "Scale H", then the screen scale is automatically modified based on the aspect ratio. To save the scale, press the SELECT button at "Yes", When Custom is selected, the saved scale is used. To reset, press the SELECT button at "Yes". Press the SELECT button at Common or Reset, to display a confirmation box. Notes: · When no signal is detected, "Normal" is set automatically and the Aspect dialog box disappears. · The adjustable range for Scale H/V and Position H/V is limited depending on the input signal. 5 Computer Input For zooming in and out the images Digital zoom + When the Digital zoom + is selected, the On-Screen Menu disappears and the message "D. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D. ZOOM e button on the remote control. Digital zoom ­ When Digital zoom ­ is selected, the On-Screen Menu disappears and the message "D. A projected image can be also compressed by pressing the D. ZOOM d button on the remote control. To exit the Digital zoom +/­ mode, press any button except the D. ZOOM ed buttons, SELECT, and Point buttons. To return to the previous screen size, select a screen size from the Screen Size Adjustment or select an input source from the Input Source Selection (p. 26) again, or adjust the screen size with the D. ZOOM ed buttons. Remote Control POINT buttons SELECT button D . ZOOM + button D . ZOOM - button Notes: · The panning function may not operate properly if the stored Mode in the PC Adjust Menu is used. (p. 30) · The minimum compression ratio can be limited depending on the input signal or when the Keystone function is working or when the Custom is selected for the screen size. · True, Full, and Digital zoom +/­ cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p. 27). · Digital zoom +/- cannot be selected when Full or True is selected. 6 Video Input Input Source Selection (Video) Direct Operation Choose Video by pressing the VIDEO button on the remote control. Remote Control VIDEO button Video Menu Operation Input Menu icon 1 2 Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red framed pointer to the Input Menu icon. Press the Point ed buttons to move the red arrow pointer to Video and then press the SELECT button. Input Menu Move the pointer to Video and press the SELECT button. Note: When the Input Search function is set On1 or On2, the input signal will be searched automatically (p. 46) 7 Video Input Input Source Selection (S-video, Component, RGB Scart 1-pin) Direct Operation Choose S-video, Component or RGB(Scart) by pressing the COMPUTER button on the remote control. [. . . ] Off On Auto Keystone Off Auto Manual Quit On start Lamp control Remote control Security Quit Quit Fan Fan control Closed Caption L1/L2 Off/On1/On2 Off/CC1/CC2/CC3/CC4 Color/White Quit Lamp counter Hour(s) Reset Quit Yes/No Factory default Quit 68 Appendix Indicators and Projector Condition Check the indicators for projector condition. Indicators LAMP POWER WARNING REPLACE red red/green yellow Projector Condition The projector is off. (The AC power cord is unplugged. ) The projector is preparing for stand-by or the projection lamp is being cooled down. The projector is ready to be turned on with the POWER ON/STANDBY button. The projector is operating normally. The projector is in the Power management mode. The temperature inside the projector is abnormally high. [. . . ]