User manual SANYO PLC-XU84

[. . . ] Multimedia Projector MODEL PLC-XU87 PLC-XU84 Network Supported Wireless LAN IEEE802. 11b/g Wired LAN 100-Base-TX/10-Base-T Memory Viewer USB Memory Viewer (optionally available) Compatible with a dedicated USB memory Refer to the owner's manuals below for details about network and memory viewer function. Network Set-up and Operation Owner's Manual USB Memory This manual is provided with optionally supplied USB memory. Owner's Manual Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16. 77 million colors, and matrix liquid crystal display (LCD) technology. Compact Design This projector is designed compact in size and weight. It is easy to carry and installed anywhere you wish to use. Logo Function The Logo function allows you to customize the screen logo (pp. 47-48). [. . . ] Use the Point ed buttons to move the red frame pointer to the desired image mode and then press the SELECT button. Dynamic Move the red frame pointer to the desired image mode and press the SELECT button. For viewing pictures in a bright room. Image 1~4 For viewing with the user preset image mode in the Image Adjust Menu (see pages 35-36). The selected image mode is check marked. 34 Computer Input Image Adjustment 1 2 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon. Use the Point ed buttons to move the red frame pointer to the desired item and then press the SELECT button to display the adjustment dialog box. Contrast Image Adjust Menu Image Adjust Menu icon Move the red frame pointer to the desired item and then press the SELECT button. Press the Point 7 button to decrease the contrast; press the Point 8 button to increase the contrast (from 0 to 63). Brightness Press the Point 7 button to decrease the brightness; press the Point 8 button to increase the brightness (from 0 to 63). White balance (Red) Press the Point 7 button to lighten red tone; press the Point 8 button to deepen red tone (from 0 to 63). White balance (Green) Press the Point 7 button to lighten green tone; press the Point 8 button to deepen green tone (from 0 to 63). White balance (Blue) Press the Point 7 button to lighten blue tone; press the Point 8 button to deepen blue tone (from 0 to 63). Sharpness Press the Point 7 button to decrease the sharpness of the image; press the Point 8 button to increase the sharpness of the image (from 0 to 15). Gamma Use the Point 7 8 buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15). Reset To reset the adjusted data, select Reset and press the SELECT button. All adjustments will return to their previous figures. Use the Point 7 8 buttons to adjust the setting value. Selected Image mode Note: ·When the White balance Red, Green, or Blue is adjusted, the Color temp. level will change to "Adj. ". 35 Computer Input Store To store the adjusted data, select Store and press the SELECT button. Use the Point ed buttons to select one from Image 1 to 4 and press the SELECT button. Stored data can be called up by selecting an "Image (1­4)" in the Image Mode Selection on page 34. Quit Exit the Image Adjust Menu. Store icon A confirmation box appears and then select [Yes] Image Mode Menu Move the red frame pointer to an image item to be set and then press the SELECT button. Screen Size Adjustment This projector has the picture screen resize function, which enables you to customize the image size. 1 2 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Screen Menu icon. Use the Point ed buttons to move the red frame pointer to the desired function and then press the SELECT button. Normal Screen Menu Screen Menu icon Move the red frame pointer to the function and press the SELECT button. Provide the image to fit the screen size. [. . . ] Fine sync Total dots Horizontal Vertical Current mode Clamp Display area H Display area V Reset Mode free 0­31 H-sync freq. Quit Store Yes/No Mode 1 Mode 2 Mode 3 Mode 4 Mode 5 Quit Mode 1 Mode 2 Mode 3 Mode 4 Mode 5 Quit Red Green Blue Sharpness Gamma Reset Store Quit Screen Quit Normal True Wide Full screen Digital zoom + Digital zoom ­ 64 Appendix Video Input System (2) Auto 1080i 1035i 720p 575p 480p 575i 480i Auto PAL SECAM NTSC NTSC 4. 43 PAL-M PAL-N Setting Setting 16 languages provided. On/Off Auto keystone Auto Manual Off Keystone Store/Reset Blue back On/Off Display On/Countdown off/Off Logo Logo select Off Default User Capture Yes/No Logo PIN code lock Logo PIN code entry Off/On Logo PIN code change Quit Quit Ceiling On/Off Rear On/Off Terminal Computer 2/Monitor Out Input search Off/On1/On2 Standby mode Eco/Normal Power management Off Ready Shut down Timer (1­30 Min. ) Quit On start On/Off Lamp control Normal/Auto/Eco Pointer Spotlight/Pointer Quit Remote control Code 1­Code 8 Security Key lock Off Projector Remote control Quit PIN code lock PIN code lock entry Off/On1/On2 PIN code change Quit Quit Fan L1/L2 Fan control Normal/Max Warning log Lamp counter Hour(s) Reset Yes/No Quit Filter counter Hour(s) Off/100H/200H/300H Reset Yes/No Quit Factory default Yes/No Quit Language System (3) Image Select Dynamic Standard Cinema Blackboard (Green) Image 1 Image 2 Image 3 Image 4 Image Adjust Contrast Brightness Color Tint Color temp. Red Green Blue Sharpness Gamma Noise reduction Progressive Reset Store 0­63 0­63 0­63 0­63 High Mid Low XLow Adj. 0­63 0­63 0­63 0­15 0­15 Off L1 L2 Off L1 L2 Film Yes/No Image 1 Image 2 Image 3 Image 4 Quit Quit Screen Normal Wide 65 Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock for analog signal and 110 MHz of Dot Clock for digital signal. [. . . ]