User manual SANYO PLC-XU47

[. . . ] Multimedia Projector MODEL PLC-XU41 PLC-XU47 Owner's Manual Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16. 77 million colors, and matrix liquid crystal display (LCD) technology. Compact Design This projector is designed compact in size and weight. It is easy to carry and work anywhere you wish to use. Selectable Lamp Mode Brightness of the projection lamp can be selected in the Setting menu. [. . . ] Press the Point d button to move the red frame pointer to the item that you want to adjust, and then press the SELECT button. Contrast Image Adjust Menu Image Adjust Menu icon Move the red frame pointer to the item to be selected and then press the SELECT button. Press the Point 7 button to decrease contrast and the Point 8 button to increase contrast. (From 0 to 63. ) Brightness Press the Point 7 button to adjust image darker and the Point 8 button to adjust image brighter. (XLow, Low, Mid, or High) White balance (Red) Press the Point 7 button to lighten red tone and the Point 8 button to deepen red tone. (From 0 to 63. ) White balance (Green) Press the Point 7 button to lighten green tone and the Point 8 button to deepen green tone. (From 0 to 63. ) White balance (Blue) Press the Point 7 button to lighten blue tone and the Point 8 button to deepen blue tone. (From 0 to 63. ) Sharpness Press the Point 7 button to soften the image and the Point 8 button to sharpen the image. (From 0 to 15. ) Gamma Press the Point 7 8 button to obtain better balance of contrast. Store To store the image data adjusted manually, move the red frame pointer to the Store icon and press the SELECT button. Move the red frame pointer to the Image 1 to 4 where you want to set and then press the SELECT button. Quit Closes the Image Adjust Menu. Store icon Press the SELECT button at this icon to store the adjustment. Press the Point 7 8 button to adjust value. Image Level Menu Move the red frame pointer to any of Image 1 to 4 where you want to set and then press the SELECT button. 30 Computer Input Screen Size Adjustment This projector has a picture screen resize function, which enables you to display the desirable image size. 1 2 Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Screen Menu icon. Press the Point d button and move the red frame pointer to the function that you want to select and then press the SELECT button. Screen Menu Screen Menu icon Move the red frame to the function and press the SELECT button. Normal Provides image to fit screen size. When the original image size is larger than the screen size (1024 x 768), this projector enters "Digital zoom +" mode automatically. Wide Provides image to fit wide video aspect ratio (16 : 9) by expanding image width uniformly. This function can be used for providing a squeezed video signal at 16 : 9. Digital zoom + When the Digital zoom + is selected, the On-Screen Menu disappears and the message "D. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D. ZOOM button on the remote control. Digital zoom ­ When the Digital zoom ­ is selected, the On-Screen Menu disappears and the message "D. A projected image can be also compressed by pressing the D. ZOOM button on the remote control. [. . . ] safety standards against risk of fire, casualty and electrical hazards. 51 Appendix Indicators and Projector Condition Check the indicators to see the projector condition. Indicators POWER red/green WARNING red LAMP REPLACE yellow Projector Condition The projector is OFF. (The AC power cord is unplugged. ) The projector is preparing for stand-by or the projection lamp is being cooled down. The projector cannot be turned on until cooling is completed. The projector is ready to be turned on with the POWER ON-OFF button. The projector is operating normally. The projector is in the Power management mode. The temperature inside the projector is abnormally high. When the projector is cooled down enough and the temperature returns to normal, the POWER indicator lights red and the projector can be turned on. [. . . ]