User manual SANYO PLC-XU4000

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SANYO PLC-XU4000. We hope that this SANYO PLC-XU4000 user guide will be useful to you.


SANYO PLC-XU4000 : Download the complete user guide (11630 Ko)

Manual abstract: user guide SANYO PLC-XU4000

Detailed instructions for use are in the User's Guide.

[. . . ] Multimedia Projector MODEL PLC-XU4000 Wired LAN Refer to the Owner's Manual below for details about network function. Network Set-up and Operation Network Supported Owner's Manual Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16. 77 million colors, and matrix liquid crystal display (LCD) technology. Compact Design This projector is designed compact in size and weight. It is easy to carry and installed anywhere you wish to use. Security Function The Security function helps you to ensure security of the projector. [. . . ] Note: ·Thisprojectorcannotdisplayanyresolutionhigherthan1920x1200. Ifyourcomputer'sscreenresolutionis higher than it, reset the resolution lower before connecting to the projector. ·Theimagedatainotherthan1024x768ismodifiedtofitthescreensizeininitialmode. ·True and Digital zoom +/­ cannot be selected when 480i, 575i, 480p, 575p, 720p, 1035i or 1080i is selected in the PC System Menu (p. 29). 35 Computer Input Custom adj . Press the Point button at Custom and the Custom is displayedonthescreen, youcanusethePoint buttons to choose the item you want to adjust. Adjust Scale H, then the screen scale is automatically modified based on the aspect ratio. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D. ZOOM or the SELECT button on the remote control. The projected image can be also compressed by pressing the D. ZOOM or the SELECT button on the remote control. To exit the Digital zoom +/­ mode, press any button except the D. ZOOM buttons and the SELECT button. To return to the previous screen size, select a screen size from the Screen Size Adjustment Menu or select an input source from the Input Source Selection Menu (see pages 27-28) again, or adjust the screen size with the D. ZOOM buttons. Note: ·When no signal is detected, Normal is set automatically and the Aspect dialog box disappears. ·TheadjustablerangeforScale H/V and Position H/V is limited depending on the input signal. Remote Control POINT buttons SELECT button D . ZOOM + button D . ZOOM - button Note: ·The minimum compression ratio is limited depending on the input signal, when the Keystone function is working or when the custom is selected for the screen size. ·True and Digital zoom +/­ are disabled and cannot be displayed when 480i, 575i, 480p 575p, 720p, 1035i or 1080i is selected in the PC System Menu (p. 29). ·The minimum compression ratio is limited at Normal screen size. 36 Computer Input Keystone This function is used to adjust keystone distortion of the projected image. Store To store or reset the keystone correction, press the SELECT button. Store. . . . . . . . . . . . . Keep the keystone correction even when the AC power cord is unplugged. Reset. . . . . . . . . . . . Release the keystone correction when the AC power cord is unplugged. Ceiling When this function is set to On, the picture will be top/ bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to On, the picture will be left/right reversed. Reset To reset the adjusted data, select Reset and press the SELECT button. Keystone Ceiling Rear 37 Video Input Input Source Selection (Video, S-video) Direct Operation Choose Video or S-video by pressing the INPUT button on the top control, or the VIDEO button or the S-VIDEO button on the remote control. Before using INPUT button, correct input source should be selected through menu operation as described below. Top Control INPUT button Computer 1(RGB) / (Component) / (RGB(Scart)) Computer 2(RGB) Video S-video Remote Control VIDEO button Video S-VIDEO button S-video Menu Operation 1 2 Press the MENU button to display the On-Screen Menu. [. . . ] When the projector is cooled down enough and the temperature returns to normal, the POWER indicator stops blinking and the projector can be turned on. (The WARNING indicator keeps blinking. ) The projector has been cooled down enough and the temperature returns to normal. If the projector is turned off again, unplug the AC power cord and contact the dealer or the service center for service and checkup. It may cause an electric shock or a fire hazard. ···green. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SANYO PLC-XU4000




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SANYO PLC-XU4000 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.