User manual SANYO PLC-XU105

[. . . ] Multimedia Projector MODEL PLC-XU105 Owner's Manual Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16. 77 million colors, and matrix liquid crystal display (LCD) technology. Compact Design This projector is designed compact in size and weight. It is easy to carry and installed anywhere you wish to use. Security Function The Security function helps you to ensure security of the projector. With the Key lock function, you can lock the operation on the top control or remote control (p. 50). [. . . ] Press the SELECT button at Custom and the "Custom" is displayed on the screen for a few seconds and then the Aspect dialog box appears. Adjust "Scale H, " then the screen scale is automatically modified based on the aspect ratio. To save the scale, press the SELECT button at "Yes. " When Custom is selected, the saved scale is used. To reset, press the SELECT button at "Yes. " Press the SELECT button at Common or Reset, to display a confirmation box. Notes: · When no signal is detected, "Normal" is set automatically and the Aspect dialog box disappears. · The adjustable range for Scale H/V and Position H/V is limited depending on the input signal. For zooming in and out the images Digital zoom + Select Digital zoom +. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D. ZOOM + button on the remote control. The projected image can be also compressed by pressing the D. ZOOM ­ button on the remote control. To exit the Digital zoom +/­ mode, press any button except the D. ZOOM +/­ buttons, SELECT, and Point buttons. To return to the previous screen size, select a screen size from the Screen Size Adjustment Menu or select an input source from the Input Source Selection Menu (pp. 27) again, or adjust the screen size with the D. ZOOM +/­ buttons. Remote Control POINT buttons SELECT button D. ZOOM + button D . ZOOM - button Notes: · The panning function may not operate properly if the stored Mode in the PC Adjust Menu is used (p. 31). · The minimum compression ratio can be limited depending on the input signal or when the Keystone function is working or when the custom is selected for the screen size. · True, Full , and Digital zoom +/­ cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p. 28). · Digital zoom +/- cannot be selected when Full or True is selected. 35 Video Input Input Source Selection (Video, S-video) Direct Operation Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below. Top Control INPUT button Computer 1 Computer VIDEO REMOTE CONTROL VIDEO button Menu Operation Input Menu icon Input Menu Move the pointer to Vi d e o a n d p r e s s t h e SELECT button. 1 2 3 Press the MENU button to display the On-Screen Menu. Press the Point buttons to move the red frame pointer to the Input Menu icon. Press the Point buttons to move the red arrow pointer to Video and then press the SELECT button to display the Source Select Menu . VIDEO Source Select Menu (VIDEO) Move the pointer to the desired source and then press the SELECT button. When selecting Auto, the projector automatically detects incoming video signal, and adjusts itself to optimize its performance. Video Move the pointer to the source that you want to select and press the SELECT button. Auto Video S-video When video input signal is connected to the VIDEO jack, select Video. When video input signal is connected to the S-VIDEO jack, select S-Video. Note: · When the Input Search function is set to "On1" or "On2", the input signal will be searched automatically (p. 47). 36 Video Input Input Source Selection (Component, RGB Scart 21-pin) Direct Operation Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below. Top Control INPUT button Computer 1 Computer 2 Video Menu Operation REMOTE CONTROL COMPUTER button 1 2 3 Press the MENU button to display the On-Screen Menu. Use the Point buttons to move the red frame pointer to the Input Menu icon. Use the Point buttons to move the red arrow pointer to Computer 2 and then press the SELECT button. After the Source Select Menu appeared for Computer 2, move the pointer to Component or RGB(Scart) and then press the SELECT button. [. . . ] 0­63 0­63 0­63 0­15 0­15 Off L1 L2 Off L1 L2 Film Yes/No Image 1 Image 2 Image 3 Image 4 Quit On start Lamp control Remote control Security Filter counter Quit Factory default Quit Screen Normal Wide Custom Scale H&V Position Common Reset Quit H/V On/Off H/V Yes/No Yes/No 64 Appendix Indicators and Projector Condition Check the indicators for projector condition. Indicators POWER red/green LAMP WARNING REPLACE red yellow Projector Condition The projector is off. (The AC power cord is unplugged. ) The projector is in stand-by mode. Press the POWER ON/STANDBY button to turn on the projector. The projector is operating normally. The projector is preparing for stand-by or the projection lamp is being cooled down. The projector cannot be turned on until cooling is completed and the POWER indicator stops blinking. The projector is in the Power management mode. [. . . ]