User manual SANYO PLC-XU100

[. . . ] Multimedia Projector MODEL PLC-XU100 Owner's Manual Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16. 77 million colors, and matrix liquid crystal display (LCD) technology. Compact Design This projector is designed compact in size and weight. It is easy to carry and work anywhere you wish to use. Multilanguage Menu Display Operation menu is available in 16 languages; English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Finnish, Polish, Hungarian, Romanian, Russian, Chinese, Korean, or Japanese. (p. 42) Compatibility The projector widely accepts various video and computer input signals including; Computers, 6 Color systems (PAL, SECAM, NTSC, NTSC4. 43, PAL-M, PAL-N) video, Component video, S-Video and RGB scart. [. . . ] If your computer's screen resolution is higher than it, reset the resolution to the lower before connecting to the projector. ·The image data other than 1024 x 768 is modified to fit the screen size in initial mode. · True, Full screen, and Digital zoom +/­ cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p. 27). Wide Provide the image to fit wide video aspect ratio (16 : 9) by expanding the image width uniformly. This function can be used for providing a squeezed video signal at 16 : 9. Full screen Provide the full screen image. 33 Computer Input Custom Adjust the screen scale and position manually with this function. Press the SELECT button at Custom and the "Custom" is displayed on the screen for a few seconds and then the Aspect dialog box appears. Adjust "Scale H, " then the screen scale is automatically modified based on the aspect ratio. To save the scale, press the SELECT button at "Yes. " When Custom is selected, the saved scale is used. To reset, press the SELECT button at "Yes. " Press the SELECT button at Common or Reset, to display a confirmation box. Notes: ·When no signal is detected, "Normal" is set automatically and the Aspect dialog box disappears. ·The adjustable range for Scale H/V and Position H/V is limited depending on the input signal. For zooming in and out the images Digital zoom + Select Digital zoom +. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D. ZOOM e button on the remote control. The projected image can be also compressed by pressing the D. ZOOM d button on the remote control. To exit the Digital zoom +/­ mode, press any button except the D. ZOOM ed buttons, SELECT, and Point buttons. To return to the previous screen size, select a screen size from the Screen Size Adjustment Menu or select an input source from the Input Source Selection Menu (see page 26) again, or adjust the screen size with the D. ZOOM ed buttons. Remote Control POINT buttons SELECT button D. ZOOM + button D. ZOOM - button Notes: ·The panning function may not operate properly if the stored Mode in the PC Adjust Menu is used. (p. 30) ·The minimum compression ratio can be limited depending on the input signal or when the Keystone function is working. · True, Full screen, and Digital zoom +/­ cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p. 27). ·Digital zoom +/- cannot be selected when Full screen or True is selected. 34 Video Input Input Source Selection (Video, S-Video) Direct Operation Choose Video by pressing the VIDEO button on the top control or the remote control. Before using these buttons, correct input source should be selected through menu operation as described below. Top Control VIDEO button REMOTE CONTROL VIDEO button Menu Operation Input Menu icon Input Menu Move the pointer to Video and press the SELECT button. 1 2 3 Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red frame pointer to the Input Menu icon. Press the Point ed buttons to move the red arrow pointer to Video and then press the SELECT button to display the Source Select Menu . VIDEO Source Select Menu (VIDEO) Move the pointer to the desired source and then press the SELECT button. When selecting Auto, the projector automatically detects incoming video signal, and adjusts itself to optimize its performance. [. . . ] Quit Store Quit Yes / No Mode 1 Mode 2 Mode 3 Mode 4 Mode 5 Quit Mode 1 Mode 2 Mode 3 Mode 4 Mode 5 Quit Sharpness Gamma Reset Store Quit Screen Normal True Wide Full screen Custom Digital zoom + Digital zoom ­ 58 Appendix Video Input System (2) Auto 1080i 1035i 720p 575p 480p 575i 480i Auto PAL SECAM NTSC NTSC 4. 43 PAL-M PAL-N Dynamic Standard Cinema Blackboard(Green) Image 1 Image 2 Image 3 Image 4 Setting Setting Language English German French Italian Spanish Portuguese Dutch Swedish Quit Keystone Blue back Display Logo Finnish Polish Hungarian Romanian Russian Chinese Korean Japanese Quit System (3) Store / Reset On / Off On / Countdown off / Off Logo select Off Default User Capture Yes / No Logo PIN code lock Logo PIN code entry Off On Logo PIN code change Quit Quit Image Select Ceiling Rear On / Off On / Off Off / On1 / On2 Off Ready Shut down Timer(1-30 Min) Quit Image Adjust Contrast Brightness Color Tint Color temp. 0 - 63 0 - 63 0 - 63 0 - 63 High Mid Low XLow Adj. 0 - 63 0 - 63 0 - 63 0 - 15 0 - 15 Off L1 L2 Off L1 L2 Film Yes / No Image 1 Image 2 Image 3 Image 4 Quit Input search Power management On start Lamp control Remote control Security On / Off Auto / High / Normal / Eco Code 1 / Code 2 Key lock Off Projector Remote control Quit PIN code lock PIN code lock entry Off / On1 / On2 PIN code change Quit Quit Red Green Blue Sharpness Gamma Noise reduction Progressive Fan Fan control Warning log Lamp counter L1 / L2 Normal / Max Reset Store Quit Hour(s) Reset Quit Yes / No Filter counter Screen Normal Wide Custom Factory default Quit Hour(s) Off / 100H / 200H / 300H Reset Yes / No Quit Yes / No 59 Appendix Indicators and Projector Condition Check the indicators for projector condition. Indicators POWER red/green WARNING red LAMP REPLACE yellow Projector Condition The projector is off. (The AC power cord is unplugged. ) The projector is preparing for stand-by or the projection lamp is being cooled down. The projector is ready to be turned on with the ON/STAND-BY button. The projector is operating normally. The projector is in the Power management mode. [. . . ]