User manual SANYO PLC-XL51

[. . . ] Network Supported Multimedia Projector MODEL PLC-XL51 Wireless LAN Wired LAN Memory Viewer IEEE802. 11b/g 100-Base-TX/10-Base-T SD Memory Card Viewer efer to the owner's manual below for details R about network and memory viewer function. Network Set-up and Operation (For Windows / For Macintosh) Memory Viewer function PJ Network Manager (For Windows) Owner's Manual Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16. 77 million colors, and matrix liquid crystal display (LCD) technology. Large Screen in Limited Space Short focus lens allows you to project large images from short distance (p. 14). Images can be projected on the floor. Useful Functions for Presentations - The digital zoom function expands (to approx. [. . . ] Move the pointer to the desired system and press the SELECT button. Note: ·The AV System Menu cannot be selected when selecting RGB (Scart). 39 Video Input Image Level Selection Direct Operation Select an image level from among Dynamic, Standard, Cinema, Blackboard (Green), Colorboard, Image 1, Image 2, Image 3, and Image 4 with the IMAGE button on the remote control. This is mainly effective on a green colored board, not truly effective on a black colored board. Colorboard At the time of simple projection on the colored wall, you can get the close color image to the color image projected on a white screen by selecting the similar color to the wall color from the preset four colors. Image 1­4 User preset image in the Image Adjust Menu (pp. 42-43). IMAGE button Remote Control IMAGE button Dynamic Standard Cinema Blackboard (Green) Colorboard Image 1 Image 2 Image 3 Image 4 40 Video Input Menu Operation 1 2 Use the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red frame pointer to the Image Select Menu icon. Use the Point ed buttons to move the red frame pointer to the desired level and then press the SELECT button. Dynamic Image Select Menu Image Select Menu icon Move the red frame pointer to the desired image level and press the SELECT button. For viewing picture in a bright room. This is mainly effective on a green colored board, not truly effective on a black colored board. Colorboard At the time of simple projection on the colored wall, you can get the close color image to the color image projected on a white screen by selecting the similar color to the wall color from the preset four colors. Image1­4 User preset image in the Image Adjust Menu (pp. 42-43). The image level being selected. 41 Video Input Image Level Adjustment 1 2 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon. Use the Point ed buttons to move the red frame pointer to the desired item and then press the SELECT button. Contrast Image Adjust Menu Image Adjust Menu icon Move the red frame pointer to the desired item and then press the SELECT button. Press the Point 7 button to decrease the contrast; press the Point 8 button to increase the contrast (from 0 to 63). Brightness Press the Point 7 button to decrease the brightness; press the Point 8 button to increase the brightness (from 0 to 63). Color Press the Point 7 button to decrease the intensity of the color; press the Point 8 button to increase the intensity of the color (from 0 to 63). Tint Use the Point 7 8 buttons to adjust the tint value to get a proper color balance (from 0 to 63). White balance (Red) Press the Point 7 button to lighten the red tone; press the Point 8 button to deepen the red tone (from 0 to 63). White balance (Green) Press the Point 7 button to lighten the green tone; press the Point 8 button to deepen the green tone (from 0 to 63). White balance (Blue) Press the Point 7 button to lighten the blue tone; press the Point 8 button to deepen the blue tone (from 0 to 63). Selected Image level Use the Point 7 8 buttons to adjust the value. Note: ·The Tint cannot be selected when the video system is PAL, SECAM, PAL-M, or PAL-N. ·After adjusting the White balance Red, Green or Blue, the Color temp. " 42 Video Input Sharpness Press the Point 7 button to decrease the sharpness of the image; press the Point 8 button to increase the sharpness of the image (from 0 to 15). Gamma Use the Point 7 8 buttons to adjust the gamma value to get better balance of contrast (from 0 to 15). [. . . ] When the projector is cooled down enough and the temperature returns to normal, the POWER indicator lights red and the projector can be turned on. (The WARNING indicator keeps blinking. ) Check and clean the air filters. The projector has been cooled down enough and the temperature returns to normal. If the projector is turned off again, unplug the AC power cord and contact the dealer or the service center for service and checkup. [. . . ]