User manual SANYO PLC-XC50

[. . . ] Multimedia Projector MODEL PLC-XC50 PLC-XC55 Owner's Manual Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16. 77 million colors, and matrix liquid crystal display (LCD) technology. Compatibility The projector widely accepts various video and computer input signals including: Computers, 6 C o l o r s y s t e m s ( PA L , S E C A M , N T S C , NTSC4. 43, PAL-M, and PAL-N), Component video, S-video and RGB scart. Multilanguage Menu Display Operation menu is available in 16 languages: English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Finnish, Polish, Hungarian, Romanian, Russian, Chinese, Korean, and Japanese. (p. 45) Simple Computer System Setting The projector has the Multi-scan system to conform to almost all computer output signals quickly. (p. 27) Logo Function The Logo function allows you to customize the screen logo with the Logo functions. [. . . ] Colorboard At the time of simple projection on the colored wall, you can get the close color image to the color image projected on a white screen by selecting the similar color to the wall color from the preset four colors. (pp. 42-43) The level being selected. 41 Video Input Image Level Adjustment 1 2 Press the MENU button to display the On-Screen Menu. Press the Point buttons to move the red frame pointer to the Image Adjust Menu icon. Press the Point buttons to move the red frame pointer to the item that you want to adjust, and then press the SELECT button. Contrast Image Adjust Menu Image Adjust Menu icon Move the red frame pointer to the item to be selected and then press the SELECT button. Press the Point button to decrease the contrast and the Point button to increase contrast. (From 0 to 63. ) Brightness Press the Point button to adjust the image darker and the Point button to adjust the image brighter. (From 0 to 63. ) Color Press the Point button to lighten the color and the Point button to deepen the color. (From 0 to 63. ) Tint Press the Point buttons to obtain a proper color. (XLow, Low, Mid, or High) White balance (Red) Press the Point button to lighten the red tone and the Point button to deepen the red tone. (From 0 to 63. ) White balance (Green) Press the Point button to lighten the green tone and the Point button to deepen the green tone. (From 0 to 63. ) White balance (Blue) Press the Point button to lighten the blue tone and the Point button to deepen the blue tone. (From 0 to 63. ) Press the Point buttons to adjust the value. Notes: · The Tint cannot be selected when the video system is PAL, SECAM, PAL-M, or PAL-N. · After adjusting any of the White balance Red, Green, or Blue, the Color temp. changes to "Adj. ". 4 Video Input Sharpness Press the Point button to soften the image and the Point button to sharpen the image. (From 0 to 15. ) Gamma Press the Point buttons to obtain better balance of contrast. (From 0 to 15. ) Noise reduction Noise interference on the screen can be reduced. higher reduction Progressive Interlaced video signal can be displayed in a progressive picture. With this function, the projector reproduces pictures faithful to the original film quality. Reset To reset the adjusted data, select Reset and press the SELECT button. Store To store the adjusted data, select Store and press the SELECT button. Select a level from Image 1 to 4 with the Point buttons and press the SELECT button. Stored data can be called up by selecting "Image" in the Image Level Selection on pages 40-41. [. . . ] When this indicator lights orange, replace the filter or the filter cartridge with a new one promptly. Reset the Filter counter and Scroll counter after replacing the filter cartridge (p. 59). When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the lamp counter after replacing the lamp (p. 62). 7 Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than 140 MHz of Dot Clock for Analog signal and 110 MHz of Dot Clock for digital signal. [. . . ]