User manual SANYO PLC-WXU30

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SANYO PLC-WXU30. We hope that this SANYO PLC-WXU30 user guide will be useful to you.


SANYO PLC-WXU30 : Download the complete user guide (9342 Ko)

You may also download the following manuals related to this product:

   SANYO PLC-WXU30 MEMORY VIEWER (695 ko)

Manual abstract: user guide SANYO PLC-WXU30

Detailed instructions for use are in the User's Guide.

[. . . ] Multimedia Projector MODEL PLC-WXU30 Wireless LAN IEEE802. 11b/g Wired LAN 100-Base-TX/10-Base-T Network Supported SD Card Memory Viewer Refer to the owner's manuals below for details about network and memory viewer function. Network Set-up and Operation Memory viewer Memory Viewer Owner's Manual Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16. 77 million colors, and matrix liquid crystal display (LCD) technology. This projector is designed compact in size and weight. It is easy to carry and installed anywhere you wish to use. Compact Design This projector is capable of 360-degree projection. *Some restriction required, see page 8. Capable of 360-degree Projection Operation menu is available in 16 languages; English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Finnish, Polish, Hungarian, Romanian, Russian, Chinese, Korean, and Japanese (p. 47). Multilanguage Menu Display Antitheft Alarm Function This projector is equipped with an Antitheft alarm function which sounds when vibration is detected (pp. 58­61). [. . . ] To exit the Digital zoom +/­ mode, press any button except the D. ZOOM ed buttons, SELECT, and Point buttons. To return to the previous screen size, select a screen size from the Screen Size Adjustment Menu or select an input source from the Input Source Selection Menu (see pages 30-31) again, or adjust the screen size with the D. ZOOM ed buttons. Remote Control POINT buttons SELECT button D . ZOOM + button D . ZOOM - button Notes: · The panning function may not operate properly if the stored Mode in the PC Adjust Menu is used (p. 35). · Minimum compression ratio can be limited depending on the input signal or when the Keystone function is working. · True, Full screen, and Digital zoom +/­ cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p. 32). · Digital zoom +/- cannot be selected when Full screen or True is selected. 39 Video Input Input Source Selection (Video, S-video) Direct Operation Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below. Top Control INPUT button Computer 1 (Analog) Computer 1 (Digital) Computer Video Wired Wireless INPUT button Remote Control Menu Operation VIDEO button 1 3 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Input Menu icon. Use the Point ed buttons to move the red arrow pointer to Video and then press the SELECT button to display the Source Select Menu. Move the pointer to the desired source and then press the SELECT button. Input Menu Input Menu icon Auto When selecting Auto, the projector automatically detects incoming video signal, and adjusts itself to optimize its performance. Video VIDEO Move the pointer to Video and press the SELECT button. Video S-video When video input signal is connected to the VIDEO jack, select Video. When video input signal is connected to the SVIDEO jack, select S-video. Source Select Menu (VIDEO) Move the pointer to the source that you want to select and press the SELECT button. Notes: · Wired and Wireless are for the Network function. See the owner's manual "Network Set-up and Operation" . · When the Input Search function is set to "On1" or "On2", the input signal will be searched automatically (p. 51). 0 Video Input Input Source Selection (Component, RGB Scart 1-pin) Direct Operation Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below. Top Control INPUT button Computer 1 (Analog) Computer 1 (Digital) Computer Video Wired Wireless Menu Operation Remote Control COMPUTER button Computer 1 (Analog) Computer 1 (Digital) Computer 1 3 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Input Menu icon. Use the Point ed buttons to move the red arrow pointer to Computer 2 and then press the SELECT button. After the Source Select Menu appeared for Computer 2, move the pointer to Component or RGB(Scart) and then press the SELECT button. When the input source is coming from video equipment connected to the COMPUTER IN 2/COMPONENT IN terminal with a Component-VGA Cable, select Component. Input Menu Input Menu icon Component Move the pointer (red arrow) to Computer 2 and press the SELECT button. RGB (Scart) When the input source is coming from video equipment connected to the COMPUTER IN 2/COMPONENT IN terminal with a ScartVGA Cable, select RGB (Scart). Computer Note: Move the pointer to Component or RGB(Scart) and press the SELECT button. Source Select Menu · Wired and Wireless are for the Network function. · When the Input Search function is set to "On1" or "On2", the input signal will be searched automatically (p. 51). 1 Video Input Video System Selection 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the AV System Menu icon. Use the Point ed buttons to move the red arrow pointer to the desired system and then press the SELECT button. Video or S-Video Auto The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. [. . . ] The projector has been cooled down enough and the temperature returns to normal. If the projector is turned off again, unplug the AC power cord and contact the dealer or the service center for service and checkup. It may cause an electric shock or a fire hazard. · · · green. · · · blinks green. · · · red · · · blinks red. · · · off When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SANYO PLC-WXU30




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SANYO PLC-WXU30 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.