User manual SANYO PLC-WM4500/L

[. . . ] Multimedia Projector MODEL PLC-WM4500 PLC-WM4500L Network Supported Refer to the Owner's Manual below for details about network function. £ Network Set-up and Operation Projection lens is optional. Owner's Manual Features and Design This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 1. 07 billion colors, and matrix liquid crystal display (LCD) technology. t Functionally Rich t Motor-driven Lens Shift This projector has many useful functions such as lens shifting, ceiling and rear projection, perpendicular omnidirectional projection, variety of lens options, etc. [. . . ] To reset, press the SELECT button at yes. Custom adj . PNote: ·Whennosignalisdetected, Normalissetautomatically andtheAspectdialogboxdisappears. ·TheadjustablerangeforScale H/VandPosition H/Vis limiteddependingontheinputsignal. Digital zoom + Select Digital zoom +. The Panning function can work only when the image is larger than the screen size. You can also enter the Digital zoom + mode by pressing the D. ZOOM button on the remote control. Digital zoom Select Digital zoom ­ . The projected image can be also compressed by pressing the D. ZOOM button on the remote control. You can also enter the Digital zoom - mode by pressing the D. ZOOM button on the remote control. To return to the previous screen size, select a screen size from the Screen Size Adjustment Menu or select an input source from the Input Source Selection Menu (see pages 33-35) again or adjust the screen size with the D. ZOOM button. PNote: ·Thepanningfunctionmaynotoperateproperlyifthe storedModeinthePCadjustMenuisused(p. 39). ·Theminimumcompressionratioislimiteddepending ontheinputsignal, whentheKeystonefunctionis workingorwhenthecustomisselectedforthescreen size. ·True and Digital zoom +/­ cannotbeselectedwhen 480i, 575i, 480p or575pisselectedinthePCSystem Menu(p. 36). ·Digital zoom ­ cannotbeoperatedwhenCustomis selected. 4 Computer Input Keystone This function is used to adjust keystone distortion of the projected image. t Keystone correction To correct keystone distortion, press the SELECT button. t Store or Reset To store or reset the keystone correction, press the Point u button. Keep the keystone correction even when the AC power cord is unplugged. Release the keystone correction when the AC power cord is unplugged. Keystone Ceiling When this function is set to On, the picture will be top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Ceiling Rear When this function is set to On, the picture will be left/right reversed. This function is used to project the image from rear of the screen. Rear Screen aspect This function is used to project the image to a 4:3 or 16:9 projection screen. Set to a 4:3 projection screen. PNote: - Natural wide cannot be selected when 720p, 1035i, 1080i or 1080p is selected on AV System Menu (p. 45). - When the 16:9 function is selected, Wide(16:9) is not available in the PC and AV screen (pp. 42-44, 49). - When the 4:3 function is selected, Natural wide is not available in the AV screen (p. 49). Reset This function returns all adjusted values to the factory default settings. To reset, press the SELECT button at "Yes. " 44 Video Input Video System Selection 1 Press the MENU button to display the On-Screen Menu. Use the Point pq buttons to select Input and then press the Point u or the SELECT button. Use the Point pq buttons to select Video, S-video or Computer 1(Component) and then press the SELECT button. [. . . ] Standard Zoom Lens Long Zoom Lens Ultra Long Zoom Lens Short Zoom Lens Short Fixed Lens SCART-VGA Cable : LNS-S20 : LNS-T20 : LNS-T21 : LNS-W20 : LNS-W21 : POA-CA-SCART Lens Replacement The lens of this projector can be replaced with other optional lens. This feature enables you to use the projector for wide variety of uses. For installation and replacement of the lens, always contact the sales dealer. The projector lens must be installed or replaced by well-trained sales or service engineers. [. . . ]