User manual SANYO PDP42H2W

[. . . ] Multimedia Plasma Monitor MODEL PDP42H2W Owner's Manual TO THE OWNER Before operating this Plasma Monitor, read this manual thoroughly and operate the Plasma Monitor properly. Operating the Plasma Monitor properly enables you to manage those features and maintains it in better condition for a considerable time. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents. If your Plasma Monitor seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the "Trouble-shooting" section of the end of this booklet. [. . . ] Adjust each value by pressing the 7 8 buttons. MENU Picture adjustment Contrast Brightness Color Tint Sharpness Noise reduction 62 32 32 0 0 Off NOTE : The adjusted Video and Computer values are memorized individually. Noise reduction cannot be adjusted when the input mode is "PC" or "DVI-D". 78 Select OK OK STATUS Return M E N U Exit Select the item and then press the OK button. Picture adjustment Contrast 63 78 Select 78 Adjust STATUS Return M E N U Exit Contrast Press the 7 button to decrease contrast, and the 8 button to increase contrast. Contrast 63 Brightness Press the 7 button to adjust image darker, and the 8 button to adjust brighter. Brightness 31 Color Press the 7 button to lighter color, and the 8 button to darker color. Color 31 Tint Press the 7 or 8 button to obtain proper color. Tint 0 Sharpness Press the 7 button to soften the image, and the 8 button to sharpen the image. Sharpness 8 Noise reduction Press the 7 or 8 button to select "On" or "Off". Noise reduction On 26 BASIC OPERATION SOUND ADJUSTMENT VOLUME Press the VOLUME (+/­) button(s) on the Remote Control Unit or the Front Control to adjust volume. Press the VOLUME (+) button to increase volume, and (­) button to decrease. (green) Indicates the roughly level of volume. 9 MUTE Press the MUTE button on the Remote Control Unit to mute sound. To restore sound to its previous level, press the MUTE button again or press the Volume (+/­) button(s). Mute 9 (red) VIDEO COMPONENT ON-OFF SURROUND Press the SURROUND button on the Remote Control Unit to set the 3D surround function on/off. PC/DVI-D VOLUME VOLUME button WIDE OFF TIMER MUTE PICTURE MOVE UP MUTE button OK STATUS MOVE DOWN MENU SURROUND button SURROUND AUTO PC O POWER ON SOUND ADJUSTMENT SOUND MENU Sound adjustment 1 2 3 Press the MENU button and the On-Screen Menu will appear. Press the ed buttons to select "Sound" menu and then press the OK button. Press the ed buttons to select an item that you want to adjust and make adjustment by pressing the 78 buttons. Treble Bass Balance BBE 0 0 0 Off 78 Select 78 Adjust STATUS Return M E N U Exit Treble Press the 7 button to decrease high frequency sound, and the 8 button to increase high frequency sound. Bass Press the 7 button to decrease low frequency sound, and the 8 button to increase low frequency sound. Balance Adjusts the volume balance of the left and right speakers. R BBE 3D SURROUND 9 The on-screen display when BBE is set "On" or "Bass" and Surround "On". Mach3Bass BBE Set "On" to provide "BBE-ON" sound, and set "Bass" to provide "BBE Mach 3 Bass-ON" sound. BBE and BBE symbol are registered trademarks of BBE Sound. 27 BASIC OPERATION SCREEN ADJUSTMENT ADJUSTING WIDE IMAGE SCREEN ADJUST MENU Screen adjustment 1 2 3 Press the MENU button and the On-Screen Menu will appear. Press the ed buttons to select "Screen adjustment" menu and then press the OK button. Press the ed buttons to select "Vertical" "Horizontal" or "Move", and adjust image by pressing the 78 buttons. Vertical Horizontal Move 1 1 1 78 Select 78 Adjust Adjustment data is memorized in each wide image mode. Horizontal Adjustment of horizontal expand proportion on both sides of the image. Move Adjustment of vertical position of the image. STATUS Return M E N U Exit NOTE : "Vertical", "Horizontal" and "Move" may not be adjusted depending on the screen size selected. "Vertical", "Horizontal" and "Move" can not be adjusted when the input signal is PC or DVI-D. VIDEO COMPONENT ON-OFF UP/DOWN PICTURE PC/DVI-D VOLUME OFF TIMER MUTE To directly move up/down the image vertically, press the MOVE UP / MOVE DOWN buttons. NOTE : Up and down picture function can work only when the input signal mode is "AV1", "AV2", "AV3", "Component1" or "Component2" and the image mode is "Natural wide", "Zoom" or "Zoom(Caption-IN)". WIDE PICTURE MOVE UP MOVE UP button MOVE DOWN button OK STATUS MOVE DOWN MENU SURROUND AUTO PC POWER Move +3 28 COMPUTER MODE SELECTING INPUT SOURCE REMOTE CONTROL OPERATION Select "PC" or "DVI-D" by pressing the PC/DVI-D button on the Remote Control Unit. PC DVI-D FRONT CONTROL OPERATION Select "PC" or "DVI-D" by pressing the INPUT button on the Front Control of the Plasma Monitor. (Refer to P21) SELECTING COMPUTER SYSTEM This Plasma Monitor automatically tunes to most different types of computers based on VGA, SVGA or XGA (refer to "COMPATIBLE COMPUTER SPECIFICATIONS" on page 32). When selecting PC for the input mode, this Plasma Monitor automatically detects the incoming signal and displays a proper image without any special setting. (Some computers need manual setting. ) If the Monitor may not be able to display a proper image, the following messages will be displayed. Out of scan range When the Plasma Monitor detects any signal out of the system formats provided in the Compatible Computer Specifications on page 32 of this manual, the message "Out of scan range" will be displayed for a few seconds. Make sure the connection of the computer and the Plasma Monitor. No signal 29 COMPUTER MODE PC ADJUSTMENT PC MODE ADJUSTMENT "PC mode adjustment" menu is provided to adjust "Clock", "Phase", "Position" and "Power save" to conform to your computer. These functions can be operated as follows: 1 2 3 4 Press the MENU button and the On-Screen Menu will appear. Press the ed buttons to select "PC mode adjustment" menu and then press the OK button. Press the ed buttons to select an item that you want to adjust, and then press the OK button. The selected item will appear. PC MODE ADJUSTMENT MENU Picture adjustment Sound adjustment Screen adjustment Picture setup Initial setup PC mode adjustment Screen saver Information 78 Adjust each value by pressing the 78 buttons. Select OK OK STATUS Return M E N U Exit Auto setup "Auto setup" function is provided to automatically adjust "Clock", "Phase" and "Position" to conform to your computer. [. . . ] When the Plasma Monitor is turned off with this function, the POWER indicator flashes and the Plasma Monitor cannot be turned on. Disconnect the Power cord and contact the sales dealer where you purchased the Plasma Monitor or the service center. To turn the Plasma Monitor back on for checking: 1) Disconnect the Power cord from the AC outlet and plug it again. If the Plasma Monitor cannot be turned on, disconnect the Power cord and contact the service center. This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. [. . . ]