User manual SANYO PDG-DHT100L

[. . . ] Multimedia Projector MODEL PDG-DHT100L Projection lens is optional. Owner's Manual Features and Design This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features. DLP® projector with high resolution Multilanguage Menu Display This projector is compatible with Full HD signals, allowing high definition projection. It is also compatible with two different types of userchangeable color wheels allowing high brightness or rich color reproduction. The combination of BrilliantColor TM and the rich color reproduction color wheels (supplied) offer a more true color reproduction. [. . . ] This function is used to project the image from the rear of the screen. Reset This function returns all adjusted values to the factory default settings. " Quit Exit the Screen Size Adjustment Menu. SCREEN MENU Move the red frame pointer to a function and press the SELECT button. Ceiling Rear 45 Picture Image Image Adjustment 1 2 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon. Use the Point ed buttons to move the red frame pointer to the desired item and then press the SELECT button to display the adjustment dialog box. Contrast IMAGE ADjUST MENU Image Adjust Menu icon Move the red frame pointer to the desired item and then press SELECT button. Press the Point 7 button to decrease contrast; press the Point 8 button to increase the contrast (from 0 to 63). Brightness Press the Point 7 button to decrease the brightness; press the Point 8 button to increase the brightness (from 0 to 63). Color Press the Point 7 button to decrease the intensity of the color; press the Point 8 button to increase the intensity of the color (from 0 to 63). Tint Press the Point 7 8 buttons to adjust the tint value to obtain proper color balance (from 0 to 63). Color Management The Color Management function can be used to adjust the LEVEL, PHASE, and GAMMA of the selected display colors (except for black, white, and gray) on the screen and replace these colors with other colors if required. You can store up to eight (8) color management data. Use the Point 7 8 buttons to adjust the setting value. 1 2 3 Use the Point ed buttons to move the red frame pointer to Color Management, and then press the SELECT button. The projected image freezes, and the COLOR MANAGEMENT POINTER appears. Use the Point ed7 8 buttons to move the pointer to the spot where you want to adjust the color and then press the SELECT button. The COLOR SELECTION window appears, and the color in the center of the pointer is selected and you can adjust the color. Use the Point ed7 8 buttons to adjust the LEVEL and PHASE of the color, and then press the SELECT button to confirm the setting. Then use the Point ed buttons to adjust the GAMMA for the color and press the SELECT button to accept the setting. After adjusting, press the SELECT button to go to the COLOR MANAGEMENT LIST. POINTER MODE COLOR MANAGEMENT POINTER Note: Displayed in grayout in the computer Input. ·Tint cannot be selected when the video system is PAL, SECAM, PAL -M, or PAL-N (p. 42). ·Color management is displayed in grayout when there is no signal. COLOR SELECTION MODE LIST Go to the COLOR MANAGEMENT LIST. 46 Picture Image COLOR SELECTION MODE (continued) COLOR M . (If you press the MENU button on the side control or the remote control, it returns to the COLOR MANAGEMENT POINTER and you will need to reselect and readjust the color. ) MENU Return to the IMAGE ADJUST Menu. To store the changed settings, be sure to select "LIST" and go to the COLOR MANAGEMENT LIST. COLOR SELECTION MODE Level and phase adjustment palette. Gamma adjustment palette. 4 In the COLOR MANAGEMENT LIST, the adjusted color data are checkmarked. [. . . ] 48 Hz­120 Hz Optical Information Projection Lamp 330 W UHP lamp x 2 Interface Input 1 Input 2 Input 3 Input 4 Monitor Output Other Jacks DVI-D Terminal (Digital), Mini D-Sub 15-pin Terminal (Analog), HDMI BNC Type x 5 (VIDEO/Y/G, B/Pb/Cb, R/Pr/Cr, H/HV and V), S-Video Vacant Network Board Mini D-sub 15 pin Serial port in (D-sub 9), Serial port out (D-sub 9), USB port, and Wired Remote Jack Power Voltage and Power Consumption AC 100­120 V (9. 2A Max. Ampere), 50/60 Hz (Continental Europe and The U. K. ) Operating Environment Operating Temperature Storage Temperature 41°F­104°F (5°C­40°C) 14°F­140°F (-10°C­60°C) Remote Control Battery Operating Range Dimensions Net Weight AA or LR6 Type x 2 16. 4' (5 m/±30°) 1. 79" (W) x 1. 03" (H) x 6. 24" (D) (45. 5 mm x 26. 2 mm x 158. 5 mm) 4. 1 oz (117 g) (including batteries) Accessories Owner's Manual (CD-ROM) Quick Reference Guide AC Power Cord Remote Control and Batteries VGA Cable PIN Code Label Cable covers (support cover & cover) Fixing bracket for power cord Rich color reproduction color wheel x 2 Ferrite core (for LAN cable) Strap x 2 Cable tie x 3 Real Color Manager Pro (CD-ROM) 83 Appendix l The specifications are subject to change without notice. When projecting with several projectors on the same screen or side by side, you may recognize different white balance and color uniformity on each projector. Optional Parts The parts listed below are optionally available. Wired Remote Cable(30m) Optional Interface Board (DVI) Optional Interface Board (5-BNC) Optional Interface Board (D-sub 15) Optional Interface Board (Dual-SDI) Optional Interface Board (DVI / D-sub 15) Optional Interface Board (5-BNC / VIDEO) Optional Interface Board (HD DATA Wireless Receiver) HD DATA Wireless Transmitter Box : POA-CA-RC30 : POA-MD18DVI : POA-MD16VD1 : POA-MD04VGA : POA-MD17SDID : POA-MD23ADI : POA-MD25VD3 : POA-MD26HDWL : POA-HDTM01 Note: · Between the two features of the provided Real Color Manager Pro (CD-ROM); "Color Correction" and "Gamma Correction", "Color Correction" is not available with this projector. 84 Appendix Configurations of Terminals ANALOG (Mini D-sub 15 pin) Input 5 10 15 14 4 9 3 8 13 2 7 12 1 6 11 1 2 3 4 5 6 7 8 Red Input Green Input Blue Input No Connect Ground (Horiz. sync. ) Ground (Red) Ground (Green) Ground (Blue) 9 10 11 12 13 14 15 +5V Power Ground (Vert. [. . . ]