User manual SANYO MPX-MD92

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SANYO MPX-MD92. We hope that this SANYO MPX-MD92 user guide will be useful to you.


SANYO MPX-MD92 : Download the complete user guide (910 Ko)

Manual abstract: user guide SANYO MPX-MD92

Detailed instructions for use are in the User's Guide.

[. . . ] Before installing and using this unit, please read this manual · carefully. This manual gives basic connections and operating instructions for 2 models (Color MPX-CD92, B/W MPX-MD92). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. [. . . ] With a timelapse VCR Set the recording speed to use when an alarm trigger is received to match the alarm recording speed of the timelapse VCR. The available speeds are: 2 (2H) (Default setting), 12 (12H), 24 (24H), NC, F2 NC: When an alarm trigger is received, the recording speed is not Use this setting when using the SW output terminal on a timelapse VCR that does not output a switching signal in 2H mode. With a real time VCR Set the recording speed to use when an alarm trigger is received to match the alarm recording speed of the real time VCR. The available speeds are: 6 (6H) (Default setting), 18 (18H), NC, F6 NC: When an alarm trigger is received, the recording speed is not F6: Use this setting when using the SW output terminal on a real time Using the programmed recording mode you can decided to only output the recorded live pictures from a certain camera or to give priority to the pictures from a certain camera. MODE1: Only the live pictures from the camera for which programmed recording is set are recorded. MODE2: The live pictures from the camera for which programmed recording is set are recorded together with the live pictures from the other cameras. If the VCR is not Equipped with a SW (switching) Output Connector The recording speed settings on this unit correspond to recording durations on a T-120 tape. With a timelapse VCR Set the recording speed to match the recording speed of the timelapse VCR. The available speeds are: 2 (2H) (Default setting), 12 (12H), 24 (24H), 48 (48H), 72 (72H), 96 (96H), 120, 168, 240, 360, 480, 720, 960 (960H) With a real time VCR Set the recording speed to match the recording speed of the real time VCR. the available speeds are: 6 (6H) (Default setting) , 18 (18H) , 30 (30H) , 48 (48H) , 72 (72H) , 96 (96H) , 120 , 168 , 240 , 360 , 480 , 720 , 960 (960H) NOTE: Real time VCRs speed is based on a T-160 cassette tape. When setting this unit to 6H, 18H or 30H, refer to the table 1 for the speed correspondence, and select the speed on the VCR accordingly. Programmed recording of multiple cameras is done by switching to each camera in order. In the (CAMERA SET) menu, set for each camera if programmed recording is to be conducted or not (see page 36). the recording mode set here is the same as the ACTIVE REC recording mode (see page 34). The programmed recording mode is the normal recording mode applied to the camera, while the active recording mode will modify the recording mode for the camera when an external alarm or a video sensor trigger is received. Any camera for which programmed recording is turned off, will not be recorded when an external alarm or a video sensor trigger is received. To record from a camera for which programmed recording is turned off, when an external alarm or a video sensor trigger is received, set the active recording mode to on. Used to playback a tape recorded through a black and white multiplexer, using a color multiplexer. ON: When using a black and white tape, the color killer function is active. If the VCR is Equipped with a SW (switching) Output Connector (using the VCR switching signal) Make the connection from this unit to the VCR SW output connector. The video signal output by this unit will be automatically switched to the recording speed according to the switching signal output by the VCR (switching pulse setting on the VCR). the (VCR SET) menu "REC SPEED" and "ALARM REC SPEED" items do not need to be set. [. . . ] connected to the RS-232C or RS-485 connectors is used to control the multiplexer. Make sure to turn the multiplexer power off before setting the DIP switches. MON 2 (88) To set the output at monitor 2, it can be used in combination with the monitor 1 display. + (65), ­ (66) To select settings (ON/OFF, numbers, letters, symbols) in the menus. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SANYO MPX-MD92




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SANYO MPX-MD92 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.