User manual SANYO MLS-3751L BROCHURE

[. . . ] In-Lab Top Loading Autoclaves In-lab autoclaves (personal-use mobIle unIts) mls-3751l mls-3781l 50 liters (1. 8 cu. ft. ) MLS-3751L MLS-3781L Space efficient, convenience minded, portable autoclaves offer sterilization on-demand. researchers will no longer waste valuable time and energy when limited to using a centralized building autoclave. Installation and maintenance of central autoclaves are not only costly but time consuming. [. . . ] there is a clip-on drainage hose and an exhaust tank that's easy to fill and empty, eliminating the need for fixed plumbing. Microprocessor Temperature Control sterilizing temperature is controlled by the microprocessor to within +2°c of the set temperature in the range of 115°c to 135°c. Process Voice Notification a new feature the mls series includes is voice notification of the system process. each step of the process is notified via a pre-recorded voice message, allowing the end user to hear the process as it is happening from across the room. Integrated Cool Down Fan Included as a standard feature, the cooldown fan decreases cool down process times significantly. Air Vent Control the exhaust valve release temperature can be set to allow automatic release after the sterilizing cycle has been completed. the setting range is from +0°c to 45°c above boiling point to suit the items being sterilized (patent pending). Optional Object Temperature Sensor (Model MLS-37SB) measures temperature of items in the autoclave chamber and sets the sterilization timer accordingly. suitable for materials that heat up more slowly than the chamber, such as resins. after installation, the autoclave control system can be switched between this sensor and the main sensors. Double Interlocking Structure to ensure the safe operation of this high temperature, high-pressure autoclave, the chamber and the open/close hand-pull lever are controlled by a double interlock system dependent on temperature and pressure sensors. this way, it is impossible to open the autoclave until temperature and pressure levels are safe. CONTROL PANEL s PROCESS OPERATION t e r i l i z a t i o n PRE-SET PROGRAMS these units offer a total of 12 pre-set programs to choose from on a simpleto-operate control panel with lighted temperature/timer indicators. they also allow for independent programming for users to set their own programs. after completion and cooling to a selected temp. , air is expelled automatically through the exhaust valve. sterilizing temp. : 115°c to 135°c timer: 1 minute to 5 hours exhaust temp. : 0°c to 45°c. Sterilizing/Keep Warm after sterilizing culture media, reagents and other liquids, and cooling down naturally to a selected temp. , air is expelled automatically from the exhaust valve. sterilizing temp. : 115°c to 135°c timer: 1 minute to 5 hours exhaust temp. : 0°c to 45°c Warming temp. : 45°c to 60°c. (this function is not for sterilizing but prevents solidifying. ) melting temp. : 60°c to 114°c timer: 72 hours Warming temp. : 45°c to 60°c Instrument Sterilizing For flasks, beakers, test tubes, and other lab instruments. [. . . ] time process printout, MLS-37PR Microprocessor controller with process indicators, 12 pre-set programs, LED digital display, location on lid Standard, automated voice process guidance, on/off function o o 115 C to 135 C o o 60 C to 114 C o o 45 C to 60 C Standard, built-in 1 minute up to 5 hours 1 minute up to 5 hours 72 hours delayed, auto off 1 week (designation: year, month, day, hour and minute) Exhaust valve open temperature setting Pressure safety valve, over-temperature limiter, anti-scorch limiter, door interlock, over-pressure limiter, current fuse SUS 304 stainless steel 34. 14 PSI (0. 235 MPa) Upper right, front panel Drain Hose: (1), Exhaust tank (1), exhaust hose at rear side (1), tank mounting bracket (1) Object Sensor model MLS-37SB, Process Printer model MLS-37PR Dimensions MLS-3751L MLS-3781L sterilization Accessory Stainless Steel Buckets and Baskets MLS-37BL large stainless steel mesh basket Diameter - 13. 2" Height - 8. 7" mls-3751l : 1 will fit mls-3781l: 2 will fit MLS-37BS small stainless steel mesh basket Diameter - 13. 2" Height - 6. 7" mls-3751l : 1 will fit mls-3781l: 1 will fit MLS-37C30 solid bucket Diameter - 13. 0" Height - 11. 8" mls-3751l : 1 will fit mls-3781l: 2 will fit MLS-37PB30 MLS-37PB40 stainless steel bucket stainless steel bucket perforated Holes for 3 liter flasks perforated Holes for 3 liter flasks Diameter - 13. 0" Diameter - 13. 2" Height - 11. 8" Height - 15. 7" mls-3751l : 1 will fit mls-3781l: 2 will fit mls-3751l : 0 will fit mls-3781l: 1 will fit w w w. c o m SANYO Commercial Solutions A Division of SANYO North America 1062 Thorndale Avenue, Bensenville, IL 60106 USA Toll Free USA 800-858-8442 · Fax 630-238-0074 www. sanyobiomedical. com SANYO Canada, Inc. 1- 300 Applewood Crescent, Concord, Ontario L4K 5C7 905-760-4025 · Fax 905-760-9945 LRVER507A [. . . ]