User manual SANYO MDF-C8V1 BROCHURE

[. . . ] · Emits less heat into the laboratory environment, minimizing air conditioning costs. New V. I. P ® PLUSTM Technology . MDF-C8V Features Patented revolutionary vacuum insulation cabinet construction reduces wall thickness and achieves greater storage capacity while decreasing More advanced insulation system: V. I. P. PLUSTM the footprint. LED Display with Microprocessor Controls SANYO Brand Refrigeration Comprehensive setpoint, alarm, monitoring and diagnostic functions based on SANYO-built microprocessor Single compressor designed by SANYO specifically for demanding ultra low temperature applications in a laboratory environment. SANYO's more advanced insulation system V. I. P. PLUSTM enables reducing the thickness of insulation to approximately one half compared to conventional systems. PLUSTM insulation material on the front, left, and right sides enables a smaller installation space with the highestclass storage capacity ratio. Conventional insulation* MDF-C8V1 Newly de system Use of a n sor system reduction ables low- Specific · SANYO's most advanced insulation system V. I. P® PLUSTM enables reduced thickness of insulation to . [. . . ] 21. 6"ables xx 37 (550 operation. mm) x . 2" Exterior dimension (W systems. conventional systems. to conventionalxxD xlow-noise operation. x27. 0" low-noise xx685 xx945 mm) comparison (115V, 60Hz/230V, 50Hz) *SANYO comparison (115V, 60 21. 6" 27 . 0" 37 . 2" (550 685 945 Exterior dimension (W D x H) *SANYO compared Small ables compared to MDF-C8V eatures Specifications door Outer door/Inner door Outer Lid: 1piece, Inner Lid:Outer Lid: 1piece, Inner *Appearance and specifications are subject to change without notice. SCR-072-I MDF-UBK Compressor Rotary type Outer door/Inner 1piece *Cooling performance is indicated by the temperature reached at the center of the freezer (at ambient temperature of 30°C with no load). PLUSTM insulation material onCperformance is indicated by the temperature reached at the center of the freezer (at ambient temperature of 30°C with no load). MDF-C8V polyurethane foam (HC) SCR-053-I Refrigerant apac HFC p C apac Ca Insulation Cap Insulation ac New VIP® PlusTM Rigid polyure New VIP® PlusTM Rigid comparison O comparison it it the front, left, and rightysides enables a acity ity Temperature range y Evaporator Tube on sheet type -60°C to60 Hz /(1°C increments) / 60 Hz / 1Phase NEM -80°C 1Phase NEMA 5-15P Plug Cooling system Cooling system 115V 115V / ion tion Alarm System 4. 05 sq. ft alarm (±5°C to ±20°C) 5. 65 sq. ft smaller installation space with the highest- High/Low temp. cooling performanceCompressor 5. 65 sq. ft 4. 05 sq. ft -80°C (Ambient temp. 30°C) (1/2 HP) Compressor Rotary type, Output: 400W Rotary type, Output: 400 PerformanceMaximum failure alarm PerformanceData Data Power class storage capacity ratio. 21. 6" x operation 37 (550 x 685 . 0" . 2" Exterior dimension (W x D x H) RefrigerantCO2 backup system27 xcharacteristics HFC x 945 mm) HFC Pull-down characteristics Pull-up characteristics during power failure Pull-down characteristics Refrigerant Pull-up characteristics during power failure CO2 backup system operation characteristics Inner dimension Inner dimension 15. 9" 19. 3" x 16. 9" (405 x 490 x 430 mm) onventional insulation* MDF-C8Vfreezers such as MDF-C8V takes full advan- 15. 9" xx 19. 3" x 16. 9" (405 x 490 x 430 mm) freezers such as MDF-C8V Conventionalinsulation* MDF-C8V takes full advanModel MDF-C8V1 Effective capacity 3. 0cu. ft. (84 Liter) tage ofNet weight -60°C to -80°C (-1°C increments) this feature. capacity Model Use of V. I. P. Cooling Performance material on Maximum PLUS insulation StoragePLUS insulation material on2" box: 42pcs. (SCR-072 MDF-C8V Storage Model 2" More advanced insulation system: capacity-80°C (Ambient temp. Outer door/Inner door 21. 6" right Temperature a x Outer Lid: 1piece, Inner the theExterior left, and rightxsidesfront, left, and x 27. 0"sides enablesrange945mm)Temperature Inner Lid: 1piece front, Dimension (W D x H)enables door/Innerdoor 37. 2" (550 x 685 x Outer a Rated increments) to -80°C Outer Lid: -60°C -60°C V. I. P. aapInner DimensionC(W x D x H) PLUSTM system (405 x 490 x 430mm) PlusTM 1piece, rangeLid: 1piece (HC)to -80°C (1°Cpower consumption (1°C inc CCpa Capa Insulation 15. 9" x 16. 9" New VIP® cc aity installation smaller installationapaitity smaller Insulation xspace with the highest-performance Rigid polyurethane foam-80°C (Ambient temp. 30°C)-80°C (Ambient temp space with the highest- 19. 3" Maximum cooling New VIP® PlusTM Rigid polyurethane foam (HC) c Maximum cooling performance 340W/345W SANYO's ity more Capacity c y system system 3. 0a newly developed single-compres- NEMA MDF-C8V Use of cu. ft. (84 liters) Cooling 115V / / 60 Hz / 1Phase NEMA 5-15P Plug 5-15P Plug Cooling Effective advanced insulation storage system 115V 60 Hz / 1Phase class Compressor capacity ratio. 21. 6" 945. 0" x . 2" 21. 6" x 27 . 0" . 2" Exterior dimension (W xRotary type, Output: 400WConventionalx 37 (550 x 685 x x 27 mm) 37 (550 x 6 DExterior dimension (W x D x H) x H) TM (1/2 HP) Compressor sor system achieves an approximately 40% 400W (1/2 HP) V. I. P. PLUS Weight Rotary type, Output: Net enables reducing the thickApprox. (67kg) Inner Inner dimension 3" Box: 30pcs dimension 15. 9" x 19. 3" x 16. 9" (405550W/600W mm)16. 9" (405 x x15. 9"xx430 x 490 19. 3" Refrigerant 42pcs. (SCR-072power consumption and en- HFC Refrigerant model* HFC Conventional MDF-C8V insulation* MDF-C8V Storage Capacity insulation* Conventional reduction in x 6 racks) 2" box: ness of insulation to approximately one half 3. 0cu. ft. (84 Liter) Tube capacitytype Evaporator Tube on sheet *SANYO comparison (115V, 60Hz/230V, 50Hz) Outer conventional systems. Small Door/Inner Door Outer Lid:Effective capacity1 piece Effective on sheet type 1 piece, Inner Lid: ables low-noise operation. [. . . ] 30°C, No-load Back-up system 729 (28. 7") less structure Back-up system 0 system system ­20 15 mounting kit mounting kit ­20 550 (21. 6") 685 (27. 0") 58 (2. 3") 685 (27. 0") 550 (21. 6") 58 (2. 3") A new cooling circuit makes the inconve44 (1. 7") 39 (1. 5") 44 (1. 7") MDF-UBK39 (1. 5") MDF-UBK ­40 ­40 of ­70°C by injection of LCO2 (30kg) 5. 65 sq. ft 4. 05 sq. ft ­100 ­120 Time Performance Data (hour) 0 1 2 3 4 5 6 ­100 ­120 7 80 of ­70°C by injection of LCO2 (30kg) Am of ­ ­100 10 2 Inventory rack Inventory (hour) Time (hour)rack Time 3 1 4 2 5 3 6 4 7 5 8 6 7 ­100 80 1 0 2 5 Time (hour) Ambient temperature (°C) 3 10 4 15 5 6 20 7 25 8 30 A Tem 8 ­100 0 1 2 Time (hour) 3 4 5 6 7 8 0 5 Ambient temperature (°C) 10 MTR-C954 15 20 25 30 35 MTR 945 (37. 2") 945 (37. 2") 887 (34. 9") 887 (34. 9") Medical devices Quality management system:ISO13485/Environmental management Electric Co. , Ltd. SANYO system:ISO14001 729 (28. 7") 58 (2. 3") 550 (21. 6") 44 (1. 7") 685 (27. 0") SANYO Sales & Marketing Corporation SANYO Sales & Marketingsystem Corporation URL http://www. sanyo. co. jp/cmg/biomedical Product conforms to RoHS (European Restriction of HazardousURL http://www. sanyo. co. jp/cmg/biomedical (I) Substance directives) CVK-UB4 ©2006 SANYO Printed inin Japan 2006. 10. SHR110 852 (33. 5") Dimensions [Unit : mm (inch)] Options SANYO Electric Co. , Ltd. , Biomedical Division, Gumma is certified for Quality management system:ISO9001/ Inventory rack Temperature Recorder 5-15, Hiyoshi-cho 2-chome, Moriguchi City, Osaka, 570-8634, Japan 5-15, Hiyoshi-cho 2-chome, Moriguchi City, Osaka, 570-8634, Japan 39 (1. 5") Telephone: +81-6-6992-0322 Fax: +81-6-6992-9291 Telephone: +81-6-6992-0322 Fax: +81-6-6992-9291 852 (33. 5") 405 (15. 9") 405 (15. 9")490 (19. 3") 490 (19. 3") Inve 430 (16. 9") 945 (37. 2") 887 (34. 9") product Distributed by: GREEN 852 (33. 5") SANYO Canada, Inc. 35 green 35 is committed to developing (1. 4") technologies (1. 4") SANYO405 (15. 9") 201 Creditview Road, Woodbridge, Ontario L4L 9T1 490 (19. 3") 905-265-4100 · Fax 905-265-4101 that provide energy efficiency resulting in lower We design and manufacture with ISO9001 & 14001 requirements. [. . . ]