User manual SANYO MAR-B3089

[. . . ] The strap can be bent by hand to the desired angle. Removing the unit 1. Grasp the center area of the trim ring from the top or bottom edge, then pull outward to remove it. (When reattaching the trim ring, carefully align it with the front panel of the unit, then press it into place. Levers Insert the levers supplied with the unit into the grooves on both sides of the chassis (as shown in the figure) until they click into place. [. . . ] Note: If the front panel is not locked into the proper position, pushing the eject button may not release the panel and the other control buttons may not function. SECURITY To avoid theft or loss of the front panel, you can inactivate the release knob by installing the screw provided as shown. Do not put pressure on the display or control buttons when detaching or reinstalling the front panel. Do not touch the contacts on the front panel or on the main unit body. If any dirt or foreign substances have adhered to the contacts, they can be removed with a clean, dry cloth. Do not expose the front panel to high temperatures or direct sunlight. Do not expose the front panel to benzene, thinner, insecticides or any other strong chemicals. Do not attempt to disassemble the front panel. 7 OPERATION CONTROLS AND FUNCTION KEYS 1 14 16 17 15 3 4 2 12 11 7 8 13 18 5 6 10 9 19 1. PWR (=POWER) Press the button to turn on the unit, press again to turn it off. The desired mode can be selected as below: Volume Bass Treble Balance Fader Each mode is indicated on display. VOL (=VOLUME UP/DOWN) Used for audio UP/DOWN control when the SEL button is pressed. Sound quality is controlled as below: · In volume mode: Press ` ' to increase volume level, and press ` ' to decrease the level. The volume level is updated correspondingly and its status is shown on the display. · In bass mode: While "BAS" is shown on display, press ` ' to increase bass level, and press ` ' to decrease the level. The bass level is updated correspondingly and its status is shown on display. 8 · In treble mode: While "TRE" is shown on display, press ` ' to increase treble level, and press ` ' to decrease the level. The treble level is updated correspondingly and its status is shown on display. · In balance mode: While "BAL" is shown on display, press ` ' to shift sound level to right speaker, press ` ' to shift sound level to left speaker. The shift point is updated correspondingly and its status is shown on the display. · In fader mode: This function controls the balance between front and rear speakers of 4 speakers system. While "FAD" is shown on display, press ` ' to shift sound level to front speakers, press ` ' to shift sound level to rear speakers. The shift point is updated correspondingly and its status is shown on the display. MUT (=MUTE) Press the button to cut the sound output and LCD display will indicate "MUTE" and flash. Press any button to release the mode and recover the previous volume level. [. . . ] LABOR 1 YEAR PARTS 1 YEAR EXCLUSIONS This warranty does not cover (A) the adjustment of customer-operated controls as explained in the appropriate model's instruction manual, or (B) the repair of any product whose serial number has been altered, defaced or removed. This warranty does not apply to the cabinet or cosmetic parts, knobs or routine maintenance. This warranty does not apply to the elimination of car static or motor noise, correction of antenna problems, or damage to compact discs, speakers, accessories or vehicle electrical systems. This warranty does not apply to repairs or replacements necessitated by any cause beyond the control of SFC including, but not limited to, any malfunction, defect or failure caused by or resulting from unauthorized service or parts, improper maintenance, operation contrary to furnished instructions, shipping or transit accidents, modification or repair by the user, abuse, misuse, neglect, accident, incorrect power line voltage, fire, flood or other Acts of God, or normal wear and tear. [. . . ]