User manual SANYO LNS-S04 LENS REPLACEMENT AND INSTALLATION

[. . . ] (See the chart below. ) for use the other models (other than above cabinet), contact your sales dealer. Printed in Japan 1AA6P1P5925-- (IfTT) Notes on Lens Installation and Replacement Lens installation and replacement should be performed by the qualified service personnel. Before attempt to replace the lens, confirm the model number (both the LCD projector and the lens) and use the proper lens. [. . . ] Insert the Lens Attachment and secure with the four (4) screws (supplied). 5. ) Connect the Lens Motor Lead to the socket on the top loght of the Lens Attachment. (610 275 6029) Lens Attachment (supplyed with the projector) Lens Attachment 01 POA-LNA-01 Part No. (610 303 8742) Lens Attachment Socket Connector Lens Motor Lead Fig. 6 8 Grasp (release lock) the Lens Lock Lever and turn it fully upward. Grasp the Lens Lock Lever and turn the Lever f u l l y d ow nwa r d u n t i l l eve r i s Lo cke d (clicked position) properly. 8) After installing the lens, make sure the lens is not loose and properly installed. LENS LOCK RELEASE Grasp (unlock) Lens Lock Lever and pull upward. LENS LOCK Grasp (unlock) Lens Lock Lever and fully pull downward until it is locked (clicked). Fig. 8 9 T o ensure that the lens is securely fixed to the projector when mounting, be sure to attach the Safety Clamp (supplyed with the projector). There are two different types of Safety Clamps depending on the lens of the projector. Make sure that the Safety Clamp is mounted to hold the Lens Lock Lever in the lock position. 9-2) 10 I nstall the Upper Light-Block Plate into the guide of Lower Light-Block Plate. 10) Note: When installing the Upper Light-Block Plate, the Lower Light-Block Plate should be lifted upward with your hand. [. . . ] 12 C' D' A' B' Screen 60-inch projection 13 Turn the projector on and operate Lens shift, Zoom and Focus fully to check the Light-Block Plates. If Light-Block Plate interferes with those operations, check the Light-Block Plate is set properly. Distance Spacer C B D Lens A Lens Attachment BE SURE TO CHECK FOR SAFETY After installing or replacing the lens, be sure to check the following for safety. [. . . ]