User manual SANYO LCD42K40TD

[. . . ] INSTRUCTION MANUAL LCD-32K40TD LCD-42K40TD LCD TV IMPORTANT INFORMATION If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as: Using cabinets or stands recommended by the manufacturer of the television. Ensuring the television is not overhanging the edge of the supporting furniture. Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television to a suitable support. [. . . ] As Pictures 3 and 4 shown, you can press or button to select Yes and then press OK button to access the operation. After Auto Tuning, the LCD TV will memorize all ATV/DTV channels available. The Saving display will be shown on the screen like Picture 5 for 5 seconds. And then the first position in the programme list will be on. Picture 3 Picture 1 4 Picture 2 5 Note: At the first power on and just after plug and play channel set-up, operating mode selection menu will appear, shown as picture 6. Press orbutton to select and press OK button for Standard/Energy Save or Store/Dynamic. The password for Block Programme will be cleared after auto tuning. Picture 4 Picture 5 Picture 6 25 TV SETTING DTV MANUAL TUNING 1 2 3 4 In TV SETTING menu, Press or button to select DTV Manual Tuning, then press or OK button to access. When search is finished, the total of programmes will be shown as Picture 3. Press MENU button or no operation for a few seconds (the duration can be set) to exit the menu. Picture 1 Picture 2 Picture 3 ATV MANUAL TUNING 1 2 3 In TV SETTING menu, press or button to select ATV Manual Tuning, then press or OK button to access. Press or button toselect a channel positon in which you want to store. Press or button to select Search item, press or button to begin the manual ATV channel search as Picture 3. Press button, the LCD TV will search towards lower frequency. Picture 1 Picture 2 4 The search stops when a programme is found and this programme will be stored in current channel temporarily, then press the RED button to confirm for a long time storage. Picture 3 26 TV SETTING SETTING COLOUR SYSTEM Normally it is unnecessary to set colour system. However, if abnormal colour occurs, you may try to adjust the colour system. 1 2 3 Navigate to ATV Manual Tuning submenu, press or button to highlight System-C item. PressorbuttontoselectAUTO, PAL or SECAM until the proper colour effect is reached. Press RED button to save. SETTING SOUND SYSTEM In case of abnormal sound, you may try to adjust the sound system. 1 2 3 Navigate to ATV Manual Tuning submenu, press or button to highlight System-S item. PressorbuttontoselectDK, I or BG until the proper sound effect is reached. Press RED button to save. FINE TUNING Fine-Tune is not necessary under normal conditions. However, in area of inferior broadcast conditions where adjustment is necessary for a better picture and sound effect, use Fine-Tune. 1 2 3 Navigate to ATV Manual Tuning submenu, press or button to highlight Fine-Tune item. Press or button to fine tune until the best possible picture and sound are obtained. Skip ATV Manual Tuning Yes Press RED button to save. SKIP Used to remove unwanted channels from the channel scanning memory. 1 2 3 Navigate to ATV Manual Tuning submenu, press or button to highlight Current CH item. The Channel set as SKIP will not appear when pressing CHANNEL UP () or CHANNEL DOWN () button. 27 TV SETTING PROGRAMME EDIT Programme Edit is used to Favourite programme edit, channel skip/delete/move/rename setup. If the Programme Edit menu has more than one page, you may press or button to scroll the page upward or downward. CHANNEL RENAME 1 2 Press MENU button and the main menu screen displays. Press orbutton to select TV SETTING menu, Press button to access the menu. Press or button to select the channel desired and then press GREEN button, shown as Picture 3. [. . . ] When connecting Macintosh computer, the MAC Adapter (not supplied) is required. Pin Configuration 5 10 15 14 4 9 3 8 13 2 7 12 1 6 11 1 2 3 4 5 6 7 8 Red Input Green Input Blue Input Sense 2 Ground (Horiz. sync. ) Ground (Red) Ground (Green) Ground (Blue) 9 10 11 12 13 14 15 No Connect Ground (Vert. sync. ) Sense 0 Sense 1 Horiz. Reserved MAC ADAPTER (Not Supplied) Set slide switches as shown in the table below depending on RESOLUTION MODE that you want to use before you turn on LCD TV and computer. Slide Switches (1-6) 1 2 3 4 5 6 ON ON DIP 123456 13" Mode (640x480) 16" Mode (832x624) ON ON OFF OFF OFF OFF OFF ON OFF OFF OFF ON OFF 19" Mode (1024x768) OFF ON ON OFF OFF OFF SIGNAL MODE COLUMN (Recommended) This LCD TV can correspond to the signals below. After connecting with the computer, LCD TV can automatically recognize the signal from the connected PC( computer)/ HDMI. [. . . ]