User manual SANYO LCD-22VT10DVD

[. . . ] Contents Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] So the user cannot add, delete, rename or move the channels and cannot set the timers. Installation Menu: Installation menu is locked, so the user cannot add channels. Changes will be updated after exiting Configuration Menu. Set PIN Use " " or " " buttons to go to "Set PIN" option. Use numeric buttons to enter new pin number you will need to input your new pin a second time for verification purposes. The factory default pin number is 0000, if you change the pin number make sure you write it down and keep it safe. Parental Control · Some channels broadcast material which you do not want younger members of the family to watch. Any channel can be `locked' so that it cannot be selected for viewing unless a four-digit PIN code is entered. In this way any channel not suitable for younger viewers can be prohibited. · This function enables or disables the menu protection system and allows the PIN code to be changed. Time Settings(**) (**): Time setting will not be available for UK. In the configuration menu, highlight the Time Settings item by pressing " " or " " buttons. Press OK and Time Settings sub menu will be displayed on the screen: English - 16 - 01_MB37_[GB]_(01_TV)_22890W_1900UK_IDTV_BRONZE13_10065805_50157832. indd 16 27. 02. 2010 13:55:59 Dolby Digital In the Configuration Menu, highlight the Dolby D item by pressing " " or " " buttons. Use the " " or " " buttons to set the Dolby Digital as On or Off. If the Use " " or " " buttons to highlight the Time Zone Setting. Time Zone Setting is set using " " or " " buttons. When AUTO is selected, Current Time and Time Zone options will not be available to be set. If MANUAL option is selected as the Time Zone Setting, Time Zone can be altered: · By pressing " " or " " buttons select Time Zone. Use " " or " " buttons to change the Time Zone between GMT-12 or GMT+12. Current Time on the top of the menu list will then change according to the selected Time Zone. channel that you are watching supports Dolby Digital and Dolby Digital Plus, you can turn this setting on. Hard of Hearing (*) Use " " or " " button to select Hard of Hearing and then press " " or " " button to set this setting as On or Off. If the broadcaster enables any special signal concerning the audio, you can set this setting as On to receive such signals. (*) Hard of Hearing function will not be available for UK. Channel List Use " " or " " buttons to go to Channel List option. If you select "TV Only", with the " " or " " buttons, you navigate through only TV channels. If you select "Radio Only", with the " " or " " buttons, you navigate through only radio channels. [. . . ] You can set the desired option by highlighting it using " " or " " button and then by pressing OK button. Note: You can shift to screen up or down by pressing " " / " " buttons while picture zoom is selected as panaromic, 14:9, Cinema or Subtitle. English - 27 01_MB37_[GB]_(01_TV)_22890W_1900UK_IDTV_BRONZE13_10065805_50157832. indd 27 27. 02. 2010 13:56:07 Tips Screen Care Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the coating layer of the TV screen. When moving the TV, hold it properly from the bottom part. Remote Control Your TV no longer responds to the remote control. If so you can still use the local buttons at the bottom of the TV. Input Sources If you cannot select an input source, it is possible that no device is connected. [. . . ]