User manual SANYO KBC-9V3U

[. . . ] The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. Location For safe operation and satisfactory performance of your unit, keep the following in mind when selecting a place for its installation: Shield it from direct sunlight and keep it away from sources of intense heat. Avoid places with insufficient ventilation for proper heat dissipation. Do not place the unit on a carpet because this will block the ventilation holes. Do not place the unit directly on top of a monitor TV, as this may cause playback or recording problems. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. [. . . ] To end search mode Press the [EXIT/OSD] button. 25 e00_VDH_M814. book Page 26 Thursday, October 28, 2004 9:59 AM 5. PREVENTING ACCIDENTAL OPERATION (KEY LOCK FUNCTION) 1 2 3 4 LOCK/REMOTE indicator OPERATION [ Follow the steps below to set the key lock function, preventing accidental pressing of the operation buttons. ] button Setting the key lock function With the digital video recorder recording or stopped, hold down the [ ] button for about 3 seconds. When the key lock is set, a confirmation tone sounds, and the LOCK/REMOTE indicator lights. You cannot set the key lock during playback. Releasing the key lock function With the key lock function set, hold down the [ ] button for about 3 seconds. When the key lock is released, a confirmation tone sounds, and the LOCK/REMOTE indicator turns off. When the key lock function has been set, the buttons cannot be used for settings or operations. If you have already set the security lock, the password entry screen is displayed. ( P. 58) When the security lock is set, you cannot set the key lock alone. 26 e00_VDH_M814. book Page 27 Thursday, October 28, 2004 9:59 AM 6. COPYING RECORDED VIDEOS TO EXTERNAL MEDIA [MENU] button [ ] button [ ] button [ ] button [EXIT/OSD] button 1 2 3 4 CompactFlash card reader OPERATION CompactFlash card [ ] button CD-R/RW drive CD-R/RW Use the following procedure to copy recorded videos to a CompactFlash card or CD-R/RW. CompactFlash cards and CD-RWs can also be formatted as described below. 1 Press the [SEARCH] button while the digital video recorder is recording or stopped. The <SEARCH/COPY> screen appears. Do not turn off the power while a video is being copied. Once data has been written, therefore, it will not be possible to add additional data to a disc, even if free space is available. When a large amount of data is to be copied, it can be divided between a number of different discs or cards. At least 2MB of available space is required when copying to a CompactFlash card. The digital video recorder can automatically detect whether the copy destination is a CompactFlash card or a CD-R/RW disc. For some items, lower-level menus can be selected. 30 e00_VDH_M814. book Page 31 Thursday, October 28, 2004 9:59 AM MENU CONFIGURATION Restoring items to the default settings Follow the steps below to restore the settings in the displayed setting screen to the default settings. RECORDER MENU ( P. 43) Lets you make various recording settings, and initialize the hard disk. 1 2 Display the setting screen you want to restore. Press the [MENU RESET] button. The displayed settings are restored to the default settings. 4. DISPLAY SET ( P. 53) Lets you display or hide information items in the operation display area. [MENU RESET] button 31 SETTINGS Overview of settings The following screens are setting screens displayed by selecting items from the <MAIN MENU> screen. Each time you press the [MENU] button, each of the screens shown on this page is displayed in the order shown. 5. BUZZER SET ( P. 54) Lets you enable or disable audible alarms for various events. 1. LANGUAGE/CLOCK SET ( P. 33) Enables the following settings: Screen display language Digital video recorder's date and time settings Daylight Saving time settings Time synchronization with external devices 6. SECURITY LOCK SET ( P. 55) Lets you set passwords to prevent unauthorized users from operating the digital video recorder. 2. SCREEN SET MENU ( P. 38) Lets you make the following screen-related settings: Screen display method Camera titles Motion sensor for detecting moving subjects 7. RS-485/NETWORK SET ( P. 59) Used to make the settings needed when connecting the digital video recorder to an external device by RS-485 interface, or to a PC via a network (LAN). e00_VDH_M814. book Page 32 Thursday, October 28, 2004 9:59 AM MENU CONFIGURATION 8. POWER LOSS/USED TIME ( P. 62) Lets you check the date and time of power failures and the elapsed amount of hard disk operation time. 9. [. . . ] If you don't want to initialize the hard disk, select "NO". e00_VDH_M814. book Page 64 Thursday, October 28, 2004 9:59 AM MENU UPLOAD/DOWNLOAD To save settings to a CompactFlash card To load settings from a CompactFlash card 1 Press the [ ] or [ ] button to select "SAVE MENUS TO CF", then press the [ ] button. The <WARNING> screen is displayed. "NO" flashes. 1 Press the [ ] or [ ] button to select "LOAD MENUS FROM CF", then press the [ ] button. The <WARNING> screen is displayed. "NO" flashes. 2 Press the [ ] or [ ] button to select "YES", then press the [ ] button. Saving starts. 2 Press the [ ] or [ ] button to select "YES", then press the [ ] button. Loading starts. SETTINGS When you have finished loading, the display returns to the <MENU UPLOAD/DOWNLOAD> screen. A file named "M814MENU. txt" is created on the CompactFlash card. When you have finished loading, the display returns to the <MENU UPLOAD/DOWNLOAD> screen. To format CompactFlash cards 1 Press the [ ] or [ ] button to select "FORMAT CF", then press the [ ] button. The <WARNING> screen is displayed. [. . . ]