User manual SANYO HT32546

[. . . ] Model Number Trade Name Responsible party Address : : : : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION: WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION: Changes or modifications not expressly approved by the manufacturer may void the user's authority to operate this equipment. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. Location For safe operation and satisfactory performance of your unit, keep the following in mind when selecting a place for its installation: Shield it from direct sunlight and keep it away from sources of intense heat. [. . . ] ----- 4 Use the jog dial to change from "­ the shuttle dial clockwise. "­ ­ " (day) flashes in the line 1. ­" to " 11" , and then turn 5 Press the EXIT/OSD button. This completes the timer setting. 11--- 5 Use the jog dial to change from "­ the shuttle dial clockwise. The cursor moves to the line 2. ­" to " 17" , and then turn 1. 7 Press the EXIT/OSD button. The display returns to the normal screen. EXIT/OSD 48 English INITIAL SET MENU D Automatic camera detection This automatically detects the cameras that are connected to the digital video recorder and changes all settings for cameras that are not connected to "OFF". MENU <INITIAL SET> 1. LANGUAGE/CLOCK SET 2. TIME PERIOD SET 3. HOLIDAY SET 4. CAMERA DETECT -> -> -> -> MOVE LINES WITH JOG, SELECT WITH SHUTTLE 1 Press the MENU button to display the INITIAL SET menu screen, and then turn the shuttle dial clockwise. The INITIAL SET sub-menu appears, and the cursor moves to LANGUAGE/CLOCK SET. 2 Use the jog dial to move the cursor to CAMERA DETECT, and then turn the shuttle dial clockwise. All cameras that are connected to the digital video recorder are detected, and the settings for any unconnected cameras are changed to "OFF". English 49 RECORDING SETTING Main manu <MAIN MENU> 1. INITIAL SET 2. RECORD SET 3. GENERAL SET 4. SCREEN SET 5. POWER FAILURE/USED TIME 6. COPY MENU SETTINGS -> -> -> -> -> -> A RECORDING AREA SET menu <RECORDING AREA SET> TOTAL CAPACITY NORMAL RECORDING AREA AREA FULL RESET -> ALARM RECORDING AREA AREA FULL RESET -> ARCHIVE AREA AREA FULL RESET -> : : : : 80GB 80 % 19 % 1% Displays the total capacity of the hard disk. Sets the capacity of the normal recording area. Normal recording area CAUTION : WHEN THE AREA SETTING IS CHANGED, THE WHOLE AREA WILL BE INITIALIZED ! MOVE LINES WITH JOG, SELECT WITH SHUTTLE B RECORDING CONDITIONS SET menu <RECORDING CONDITIONS SET> DIGITAL SERIES RECORDING : OFF TOTAL NUMBER :1 NORMAL RECORDING AREA OVERWRITE ALARM RECORDING AREA OVERWRITE REMAINING DISK WARNING Sets the capacity of the archive recording area. Archive recording area Sets the capacity of the alarm recording area. Alarm recording area : OFF : OFF : 1% <RECORD SET> 1. RECORDING AREA SET -> 2. RECORDING CONDITIONS SET -> 3. NORMAL REC MODE SET -> 4. PROGRAM REC SET -> 5. TIMER SET -> 6. ALARM REC MODE SET -> 7. ALARM OPERATION SET -> MOVE LINES WITH JOG, SELECT WITH SHUTTLE Changes the settings for connections when more than one (maximum of 2) digital video recorder is connected together for series recording. Changes the image quality settings. C NORMAL REC MODE SET menu <NORMAL REC MODE SET> PICTURE QUALITY : ENHANCED AUDIO RECORDING : OFF REC RATE : 30FPS ( 18H) REC CAMERA GROUP : OFF D PROGRAM 1 SET MENU menu <PROGRAM REC SET> P-1 SELECT INDIVIDUAL CAMERA RATE(FPS) 01:0. 313 02:0. 313 03:0. 313 04:0. 313 05:0. 313 06:0. 313 07:0. 313 08:0. 313 09:0. 313 10:0. 313 11:0. 313 12:0. 313 13:0. 313 14:0. 313 15:0. 313 16:0. 313 NORMAL REC: 23H ALARM REC : 01360 Changes the audio recording settings. 4 can be set, and recording can then be carried out simply by specifying the camera for recording. You must always set the timer when carrying out timer recording. E TIMER SET menu WEEK SUN MON THE WED THU FRI SAT DLY START --:---:---:---:---:---:---:---:-<TIMER SET> STOP PROGRAM --:-- OFF --:-- OFF --:-- OFF --:-- OFF --:-- OFF --:-- OFF --:-- OFF --:-- OFF FPS 30FPS 30FPS 30FPS 30FPS 30FPS 30FPS 30FPS 30FPS SET OFF OFF OFF OFF OFF OFF OFF OFF F ALARM REC MODE SET menu <ALARM REC MODE SET> PICTURE QUALITY : ENHANCED AUDIO RECORDING : OFF ALARM RECORDING : OFF ALARM INTERLEAVE : ONLY PROGRAM GROUP : OFF REC RATE: @ 30FPS, DURATION: 5SEC PRE-ALARM RECORDING : ¤¤¤ REC RATE: **** FPS, DURATION: *** => (07733 ALARMS CAN BE RECORDED ) ALARM TRIGGER : ALARM Changes the settings for alarm recording and pre-alarm recording. G ALARM OPERATION SET menu <ALARM OPERATION MAIN MON. DISPLAY ALARM PRIORITY MON. 2 DISPLAY RETRIGGER MOTION SENSOR ALARM DURATION SET SET> : FULL : LAST : OFF : OFF -> -> Changes the alarm settings for detecting suspicious people, and also changes motion sensor settings. 50 English RECORDING SETTING A RECORDING AREA SET menu This describe how to make the various settings for each recording area. 2 Use the jog dial to move the cursor to RECORDING AREA SET, and then turn the shuttle dial clockwise. The RECORD SET sub-menu appears, and the cursor moves to RECORDING AREA SET. English 51 RECORDING SETTING AREA FULL RESET setting When the normal recording area and alarm recording area of the hard disk become full, the images in the recording areas will be automatically overwritten, starting from the oldest images that have been recorded. However, you can change this setting to prevent overwriting of images when the recording areas become full, at times such as when you want to check or edit the recorded images. In this case you need to specify each time that you want images to be overwritten in each recording area. The following procedure describes the method of doing this. 5 Press the EXIT/OSD button. The display returns to the normal screen. EXIT/OSD 1 Set the OVERWRITE setting for the NORMAL RECORDING AREA or ALARM RECORDING AREA to " OFF" in the RECORDING CONDITIONS SET menu. (See page 53. ) <RECORDING CONDITIONS SET> DIGITAL SERIES RECORDING : OFF TOTAL NUMBER :1 NORMAL RECORDING AREA OVERWRITE ALARM RECORDING AREA OVERWRITE REMAINING DISK WARNING Note: For overwriting to be carried out automatically, change the OVERWRITE setting for the NORMAL RECORDING AREA or ALARM RECORDING AREA to "ON". B RECORDING CONDITIONS SET menu This describe how to make settings for recording. MENU <RECORDING CONDITIONS SET> DIGITAL SERIES RECORDING : OFF TOTAL NUMBER :1 NORMAL RECORDING AREA OVERWRITE ALARM RECORDING AREA OVERWRITE REMAINING DISK WARNING : OFF : OFF : 1% : OFF : OFF : 1% This setting can be used to display the remaining recording area of the hard disk on the screen. At the same time, the FULL or ALARM FULL indicator at the front of the digital video recorder will flash. When writing to the hard disk is complete, you can use playback operations to check the recordings. 2 Use the jog dial to move the cursor to the AREA FULL RESET setting for the NORMAL RECORDING AREA, and then turn the shuttle dial clockwise. "NO" flashes on the WARNING screen. <RECORDING AREA SET> TOTAL CAPACITY NORMAL RECORDING AREA AREA FULL RESET -> ALARM RECORDING AREA AREA FULL RESET -> ARCHIVE AREA AREA FULL RESET -> : : : : 80GB 80 % 19 % 1% Recording settings for digital series connection (maximum 2 units besides this unit) 1 Connect the digital video recorders using the digital input and output terminals of each digital video recorder. (See page 8. ) Note: Use a straight-type STP (shielded twisted pair) Ethernet cable to connect the digital video recorders. Each cable should not be any longer than 3 meters. 2 Press the MENU button to select RECORD SET, and then turn the shuttle dial clockwise. The RECORD SET sub-menu appears, and the cursor moves RECORDING AREA SET. CAUTION : WHEN THE AREA SETTING IS CHANGED, THE WHOLE AREA WILL BE INITIALIZED ! 3 Use the jog dial to move the cursor to RECORDING <WARNING> AREA FULL RESET NORMAL RECORDING AREA ARE YOU SURE ? [. . . ] Note: If the termination settings are not correct, data will be reflected by either end of the series and this will affect the transmission of other data, so that the data that is transmitted to each device will not be correct. (Example) ­ ­ Digital video recorder Computer ­ ­ RS485 TERMINATE ON POWER 12V DC IN ON A 6789 Pin No. 1 2 3 4 5 6 7 8 9 Signal ­ RXD TXD ­ GND ­ RTS ­ ­ Operation ­ Receive data Transmit data ­ Ground ­ Request to send ­ ­ Signal direction ­ Computer Digital video recorder Digital video recorder Computer ­ System controller RS485 B AB GND ADDRESS 123 ON Termination switch OFF 1 0 TERMINATE OFF Data format Mode Character length Data transmit speed Parity Stop bit Asynchronous 8 bits 2400, 4800, 9600, 19200 bps None 1 OFF Digital video recorder Communication protocol Communication is carried out in units of 1 byte. After the computer transmits one byte of data, it waits for a response from the digital video recorder, and then transmits the next byte of data. [. . . ]