User manual SANYO FVD-C1

[. . . ] INSTRUCTION MANUAL i nd ex I Pocket CameraCorder FVD-C1 Important note This manual explains how to safely operate the FVD-C1. Make sure to read and understand the section "USING YOUR CAMERA SAFELY AND CORRECTLY" on pages 7 to 24. Keep this manual in a safe place for later reference. Warning TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE FOR AMERICAN USERS WARNING: This product contains chemicals, including lead, known to the State of California to cause cancer, and birth defects or other reproductive harm. e This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] However, if you want to specify the lighting conditions or change the overall tone of the image, the white balance can be manually set. 1 Display the EXPERT Mode Shooting Setting Screen (page 78), and select the white balance menu. > : The camera will make the white balance adjustment automatically based on the natural and artificial light conditions. q : For shooting inside under incandescent lighting. WHITE BALANCE AUTO 2 Select the desired icon from the white balance menu, and press the SET button. HINT To cancel the white balance setting e Perform step 1, select >, and then press the SET button. 85 English EXPOSURE CORRECTION When capturing images, you can make the image lighter or darker. MENU button 1 Set the main switch to REC, and set the camera to the EXPERT shooting mode (page 78). e To exit the EXPERT Mode Shooting Setting Screen, press the MENU button. Main switch 2 When the EXPERT Mode Shooting Setting Screen is not shown, toggle the SET button to the left or right. e The exposure correction bar appears. 4 SET button 00:11 3 Toggle the SET button to the left or right to adjust the exposure. e The exposure setting numerical value is shown at the left end of the exposure bar. The exposure can be set to a value from ­1. 8EV to +1. 8EV. 0 HINT The exposure correction setting is canceled in the following cases: e e e e When the pointer is set to the center position. After the power is turned off. English 86 PLAYBACK i n d ex I ABOUT THE EXPERT MODE PLAYBACK SETTING SCREEN The EXPERT mode playback settings are performed on the EXPERT Mode Playback Setting Screen. Display the EXPERT Mode Playback Setting Screen 1 2 3 Main switch Turn on the camera (page 37). Set the main switch to [PLAY]. Press the MENU button. e The Menu Screen appears. MENU button 4 Set the camera to the EXPERT mode (page 42) e The EXPERT Mode Playback Setting Screen appears. e To cancel the EXPERT Mode Playback Setting Screen, press the MENU button. PLAYBACK METHOD Set play all or 1 clip 87 English EXPERT MODE PLAYBACK SETTING SCREEN G 1 2 3 4 5 6 7 8 9 F 1 Playback method setting (page 70) e Select continuous playback or single-frame playback. 2 Multi-playback (page 66) e Display images in the 9-frame multi-display format. 3 Volume control (page 71) e Adjust the video clip and audio data playback volume. 4 Monitor brightness (page 72) e Adjust the brightness of the camera's LCD monitor display. 5 Data protect setting (page 73) e Protect data from accidental erasure. G Menu mode display (page 42) H Help display (page 107) I Remaining battery power (page 126) PLAYBACK METHOD Set play all or 1 clip H I English 88 ROTATE IMAGE Captured still images can be rotated to the correct orientation for viewing. 1 Display the EXPERT Mode Playback Setting Screen (page 87). 2 Select the rotate icon L, and press the SET button. : Rotates image counterclockwise 90 degrees. ROTATE RIGHT LEFT EXIT 3 Select the rotate right icon K or rotate left icon !, and press the SET button. e Each time the SET button is pressed, the image is rotated another 90 degrees. 89 English EDITING VIDEO CLIPS You can delete ("cut") the first part or the last part of a video clip. You can also join two video clips together and save them as one separate clip ("joining"). Note Warning concerning the battery pack remaining charge e During the editing of lengthy video clips, the time to process the large amount of data can become quite long. To avoid problems caused by the battery pack becoming depleted in the middle of video clip editing, before starting to edit be sure that a sufficiently charged battery pack is installed in the camera, or connect the AC adapter/charger. e It is recommended that a computer be used to edit long video clips. Procedure to save part of a video clip as a separate clip Play the video clip, and pause playback at the point you want to cut. J Select whether to delete the portion before the cut point or after the cut point. e The specified portion is deleted. e The original video clip is not affected. [. . . ] 100% when the AV cable is not connected) GN = 3 Sensitivity LCD monitor Flash working range Flash modes Focus Self-timer Time/date Ambient environment Approx. 80 cm to 1. 1 m (Tele) Auto-flash, forced flash, flash off TTL-type AF 2-second delay, 10-second delay Recorded with image data Temperature Humidity 0 to 40°C (operation), ­20 to 60°C (storage) 30 to 90% (operating, no condensation) 10 to 90% (storage, no condensation) Li-ion battery pack (DB-L20) x 1 69 (W) x 108 (H) x 34 (D) mm (Maximum dimensions) Volume: 149 cc Approx. 155 g (Only the camera (without battery pack and card)) Power supply Battery pack Dimensions (excluding protrusions) Weight 165 English Camera connectors DIGITAL/AV (communication/ sound and image output) terminal Regrouped jack Audio output Video output 265 mVrms (­9 dBs), 12 k or less, stereo 1. 0 Vp-p, 75 unbalanced, sync negative, composite video, NTSC color TV system/PAL TV system (switchable from the Option Setting Screen) USB 2. 0 (Full speed) USB DC IN (external DC DC 4. 7 V (for exclusive use with the supplied AC power input) terminal adapter/charger) Battery pack operation Shooting Video clip recording mode 60 minutes: Recorded in TV-S mode (320x240 pixels, 30 fps) Still image shooting mode 160 images: LCD monitor on, images captured at 20-second intervals, and flash used 1 in 3 times Playback 130 minutes: LCD monitor on, continuous playback e Until battery pack runs out when using a fully charged battery pack at a 20°C ambient temperature. e The operation time may vary depending on the conditions of the battery pack and the conditions of use. [. . . ]