User manual SANYO EC-232

[. . . ] The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. Location For safe operation and satisfactory performance of your unit, keep the following in mind when selecting a place for its installation: Shield it from direct sunlight and keep it away from sources of intense heat. Avoid places with insufficient ventilation for proper heat dissipation. Do not place the unit on a carpet because this will block the ventilation holes. Do not place the unit directly on top of a monitor TV, as this may cause playback or recording problems. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. [. . . ] (3) COPY SIZE: Displays the amount of data between "START TIME" and "END TIME" in MB. If this data is less than 1 MB in size, "-----" is displayed and "COPY START" will not be possible. A date and time earlier than "START TIME" cannot be specified. (7) Preview: Displays the image corresponding to the date/time set by "START TIME" or "END TIME". English 21 e00_l8hae_us_7. book Page 22 Thursday, April 8, 2004 11:14 AM 7 COPYING TO CF CARDS OR CD-R/RW DISCS AND FORMATTING 3 4 Press the [ ] and [ ] buttons to specify "START TIME" and "END TIME", and then press the [ ] button. Press the [ ] and [ ] buttons to select "COPY START", and then press the [ ] button. Formatting a CompactFlash card or CD-RW 1 Press the [SEARCH] button while the digital video recorder is recording or stopped. OPERATION Copying of image starts. SU+ 03-18-04 AL 00000 19:29:14 -------COPYING 20% The <SEARCH/COPY> screen appears. When copying has been completed, "COPY FINISH" appears, and the screen will return to the display of live image when any button is pressed. 2 Press the [ ] and [ ] buttons to select "FORMAT MEDIA" and press the [ ] button. An image is copied to the CompactFlash card, CD-R/ RW as follows. Example: Copying from 10:15 on April 25th with a DVR NAME of "FRONT" CompactFlash card, CD-R/RW The <WARNING> screen appears. "NO" flashes. FRONT (1) 0425-1015. mp2 0425-1015-1. mp2 0425-1015-2. mp2 (2) 3 (1) A folder is created for the DVR NAME on the CompactFlash card, or CD-R/RW. (2) A file is created inside that folder with its name reflecting the date and time. If "DVR NAME" has not been set, the name "DSRM810" will be used when creating folders. The character "+" will be used to replace any backslash (/), semi-colon (;), asterisk (*), period (. ), or colon (:) characters appearing in "DVR NAME". When adding data to the same CompactFlash card, folders such as "Folder name-1" will be created. Press the [ ] and [ ] buttons to select "YES" and press the [ ] button. Formatting of the media starts. Time is not adjusted to daylight savings time. [ ] button [EXIT/OSD] button USE NO USE 1 2 Press the [MENU] button. The MENU indicator lights, and the <MAIN MENU> screen appears. 6 Press the [ ] button. Select "1. LANGUAGE/CLOCK SET", and press the [ ] button. The cursor moves to the date/time at which to switch from standard time to daylight savings time. The <LANGUAGE/LANGUE/IDIOMA> screen appears with the cursor positioned on "ENGLISH". 26 English e07_l8hae_us_7. fm Page 27 Thursday, April 8, 2004 11:48 AM 1 LANGUAGE/CLOCK SET When "USE" is selected for "MODE" under <DAYLIGHT SAVING>. You can set the date/time at which the time is switched from standard time to daylight savings time, and the date/time at which the time is switched back again. The example below is the default value. 11 Press the [ ] and [ ] buttons to select the desired time, then press the [ ] button. The cursor moves to the minutes portion of the time. Set the desired minutes in the same manner. 12 Press the [EXIT/OSD] button. The display returns to the normal screen. Example: After the clock display reaches April 4, 2004, 01:59, the next clock display is 03:00, putting the clock an hour ahead (daylight savings time). After the clock display reaches October 31, 2004, 01:59, the next clock display is 01:00, putting the clock an hour behind (back to standard time). (1) (2) (3) <EXT. CLOCK SET> settings This section describes how to have the time synchronized automatically when two or more digital video recorders are connected. TIME", all the connected devices are synchronized to the same time (to the nearest second) every day. (Default setting: 01:00) 1 (4) (5) (6) (1) Sets the week and the day of the week for switching to daylight savings time. (4) Sets the week and the day of the week for ending daylight savings time. (6) Sets the time. Use a cable to connect the CLOCK ADJ terminal on the rear panel of one digital video recorder to the CLOCK ADJ terminal on the second digital video recorder. 1st DVR 2nd DVR WARNING OUT FULL OUT RS485 REMOTE NON REC OUT/ SERIES REC OUT ALARM IN ALARM RESET CLOCK SERIES ADJ REC IN ALARM OUT W NON REC OUT/ SERIES REC OUT ALARM IN ALARM RESET CLOCK SERIES ADJ REC IN ALARM OUT RS485 REMOTE A BC C IN OUT C A BC C IN OUT C 7 8 Press the [ ] button. To 3rd DVR The cursor moves to "1ST". 2 Press the [ ] and [ ] buttons to select the desired week, then press the [ ] button. Press the [ ] or [ ] button to move the cursor to "ADJUST. Set the desired week in the same manner. 9 Press the [ ] button. The cursor moves to "MONTH". 10 Press the [ ] and [ ] buttons to select the desired month, then press the [ ] button. 3 Press the [ ] button. "01" flashes. The cursor moves to "TIME". English 27 e00_l8hae_us_7. book Page 28 Thursday, April 8, 2004 11:14 AM 1 LANGUAGE/CLOCK SET 4 Press the [ ] or [ ] button to select the desired time, then press the [ ] button. Only an hour value can be set using "ADJUST. TIME", and minutes and seconds cannot be set. SETTINGS 5 6 Press the [EXIT/OSD] button. The display returns to the normal screen. Use the same procedure to set the time on the second digital video recorder. When you have finished making the settings, the display returns to the normal screen. [. . . ] 34 DISK FULL RESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 DISPLAY SET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 [ ] (DOWN) button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 DVR NAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]