User manual SANYO DVW-7100

[. . . ] NYC8010MS_QSG_ENG_MP_0519 5/19/04 8:57 AM Page 1 1 CONNECTING DEW CAUTION Condensation can form inside the DVD+VCR when it is suddenly moved from a cold place to a warm or humid environment. In any such circumstance do not use this DVD+VCR 1-1/2 to 2 hours allowing complete elimination of any condensation. 2 Setting the RF Output Channel and Auto Channel Programming DVD/VCR select button Select the output source (DVD or VCR) to view on the TV screen. MENU and the MAIN menu v/V the TUNING 2 Presspress to select will appear. [. . . ] Put the two batteries into the compartment making sure the + and - are correctly positioned. Replace the cover. · TV : If you are using a standard antenna to receive channels. · Change the setting of TUNING BAND to check the TV channels. CH/TRK (v/V) on 6 Useor CHANNEL (V/v)the remote control on the front panel to cycle the DVD+VCR through the channels in memory. AAA AAA NYC8010MS_QSG_ENG_MP_0519 5/19/04 8:57 AM Page 2 3 Setting the Clock Press V to choose the TIME ZONE item. 5 Press b/B to choose the correct time zone Auto Clock Set The Auto Clock Set feature is set to ON at the factory. In the ON setting, the DVD+VCR looks for a channel carrying XDS (Extended Data Services) information. The Auto Clock Feature enables the DVD+VCR to set up the clock when the DVD+VCR is turned off. 1 v/V to choose the CLOCK menu. Press 2 Press SELECT/ENTER and the CLOCK menu will appear. Press MENU and the MAIN menu will appear. Press b/B to choose The Auto Clock Set works for seting up the clock when the DVD+VCR is turned off. V to choose the DAYLIGHT SAVINGS 6 Turn off the DVD+VCR and the auto clock setting 7 works. ote There are cases where the TV station does not send or sends wrong date and/or time information and the DVD+VCR sets the incorrect time. If this happens we recommend that you set the clock manually. (AUTO, EASTERN, CENTRAL, MOUNTAIN, PACIFIC, ALASKA, or HAWAII). [. . . ] If you choose AUTO, the VCR sets the clock using the DST information broadcast in the signal (channel). If you choose ON, the VCR sets the clock when the Daylight Saving Time is started and ended. Is Everything In The Box? DVW-7100 P/NO : (8)3840R-Q005J (1E05/04 A) Printed in China [. . . ]