User manual SANYO DVD-S2000
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SANYO DVD-S2000. We hope that this SANYO DVD-S2000 user guide will be useful to you.
Manual abstract: user guide SANYO DVD-S2000
Detailed instructions for use are in the User's Guide.
[. . . ] As the best signal source , it will give you the uppermost enjoyment!
Built-in Dolby AC-3, MPEG, PCM etc. High-resolution component video output, support the future video equipment. Compatible with DVD, VCD, DVCD, CD, DVD+R/RW, DVD-R/RW, MP3, Picture CD, etc. High integrated servo system, decoding on single-chip technology, high reliability and stability, and super error- correction.
-2-
For Your Attention
IMPORTANT NOTES
Please read through this manual before making connections and operating this product. [. . . ] Press to delete the inputs in program menu.
ANGLE
V-MODE A-MODE
ZOOM
CLEAR
-9-
Connections
VIDEO SYSTEM CONNECTION
The following video outputs are available for this unit.
Composite Video
Use the cable with yellow plug of an AV cable to connect the composite video output of this unit to the video input of a TV/monitor.
S-Video
Use an S-Video cable to connect the S-Video output of this unit to the S-video input of a TV/monitor.
Component Video
Use a 3-core AV cable to connect the component outputs of this unit to the corresponding inputs of a TV/monitor.
TV/Monitor Video Input
Component Video Input
Y Pb/Cb Pr/Cr
Composite Video and S-Video Input
S-VIDEO VIDEO
Y
Pb/Cb
Pr/Cr
VIDEO
S-VIDEO
Component Video Output
Composite Video and S-Video Output
DVD Player Video Output
Notes:
Of the video outputs above, component is the best, S-VIDEO is good and the composite video is standard. Don't make all the connections above at one time, otherwise the produced pictures will be affected. Only when the video settings conform to the actual video system connections does the player produce the corresponding video output. (Please refer to the Video Setup in System Setup chapter).
-10-
Connections
AUDIO SYSTEM CONNECTION
There are two types of audio output systems. Analog audio output system includes 2-channel stereo output and Dolby AC-3 5. 1 channel output. Digital audio output system includes coaxial output.
Stereo Audio
Use a pair of audio cable (white for left, red for right) to connect the stereo audio outputs of this unit to the stereo inputs of a TV or a power amplifier.
5. 1 CH Audio
Use 3 pairs of audio cables to connect the 5. 1 CH audio outputs of this unit to the 5. 1 channel inputs of external audio amplifiers or other players.
Coaxial Audio
Use a coaxial cable to connect the coaxial output of this unit to the coaxial input of a power amplifier.
TV/Monitor/Amplifier Audio Input
L R
5. 1 CH Audio Input
2CH Audio Input Digital Audio Input
COAXIAL
FL
SL
SW
FR
SR
5. 1 CH AUDIO OUT
CEN
L
R
COAXIAL
5. 1 CH Audio Output
2CH Audio Output Digital Audio Output
Note:
DVD Audio Output
The audio settings should conform to the actual audio system connections. Please refer to the Audio Setup in System Setup.
AC POWER CONNECTION
After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket. NOTE: Unplug the AC power lead from the wall socket if the unit will not be in use for a prolonged period of time.
-11-
System Setup
Menu Operation
1. Press [ ]/[ ] to select an item you desire to set in the submenu, then press [ENTER] / [ ]to enter. Use [ ]/[ ] to select an option, then press [ENTER] to confirm it, or press [ ] to cancel. Then you can press [ ]/[ ] to continue to set other items in the submenu. NOTE: Pro Logic II functionality is effective only when DOWNMIX is set to 5. 1CH and DIGITAL OUTPUT is set to SPDIF RAW.
2. 6. 1. 1 PRO LOGIC II
This item is used to turn on or off the Pro Logic II processing. OFF: Pro Logic II processing is disabled AUTO: Pro Logic II processing is on only when Dolby Pro Logic II encoded content is detected. NOTE: When the Pro Logic II processing is turned off, all the following items (MODE, PANORAMA, DIMENSION and CENTER WIDTH) are unavailable.
2. 6. 1. 2 MODE
This item is used to set the processing mode of Pro Logic II. MUSIC: The surround experience is tailored for multi-channel music playback. MOVIE: Emphasis is given to the center channel as two-channel audio is decoded and played back into your 5. 1 system. PRO LOGIC: This activates decoding and processing of the original Dolby Pro Logic processing with mono-surround channel. We recommend using the Dolby Pro Logic Movie mode in lie of this 4-channel surround format. AUTO: Automatically selects processing mode based on the input format.
2. 6. 1. 3 PANORAMA
This item is used to turn on/off panorama mode and is available only when MODE is set to MUSIC. When panorama mode is turned on, the front stereo audio is partially fed into the surround channels for an enveloping effect.
2. 6. 1. 4 DIMENSION
This item is available only when MODE is set to MUSIC. This item allows gradual adjustment of the sound field either towards the front or towards the rear. This is useful in setting a more even balance from all speakers with some rooms.
2. 6. 1. 5 CENTER WIDTH
This item is available only when MODE is set to MUSIC. [. . . ] The default password is 136900.
5. 2 PASSWORD
You can reset the password in this item. NOTE: The default password (136900) is always active even if the password has been reset. So if you forget your reset password, use it.
-17-
Basic Playback
MP3 DISC PLAYBACK
Insert an MP3 disc into the player, then a content menu will display on the screen. MENU OPERATION: Use the direction key [ ]/[ ] to select a folder or a file, then press [ENTER] to enter the selected folder or play the selected file. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SANYO DVD-S2000
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SANYO DVD-S2000 will begin.