User manual SANYO DVD-8000

[. . . ] As the best signal source , it will give you the uppermost enjoyment! Built-in Dolby AC-3, MPEG, PCM etc. High-resolution component video output, support the future video equipment. With USB port Compatible with DVD, SVCD, VCD, DVCD, CD, DVD+R/RW, DVD-R/RW, MP3, Picture CD, etc. High integrated servo system, decoding on single-chip technology, high reliability and stability, and super error- correction. -2- For Your Attention IMPORTANT NOTES Please read through this manual before making connections and operating this product. [. . . ] Only when the video settings conform to the actual video system connections does the player produce the corresponding video output. (Please refer to the Video Setup in System Setup chapter). -10- Connections AUDIO SYSTEM CONNECTION There are two types of audio output systems. Analog audio output system includes 2-channel stereo output and Dolby AC-3 5. 1 channel output. Digital audio output system includes coaxial output. Stereo Audio Use a pair of audio cable (white for left, red for right) to connect the stereo audio outputs of this unit to the stereo inputs of a TV or a power amplifier. 5. 1 CH Audio Use 3 pairs of audio cables to connect the 5. 1 CH audio outputs of this unit to the 5. 1 channel inputs of external audio amplifiers or other players. Coaxial Audio Use a coaxial cable to connect the coaxial output of this unit to the coaxial input of a power amplifier. TV/Monitor/Amplifier Audio Input L R 5. 1 CH Audio Input 2CH Audio Input Digital Audio Input COAXIAL FL SL SW FR SR 5. 1 CH AUDIO OUT CEN L R COAXIAL 5. 1 CH Audio Output 2CH Audio Output Digital Audio Output Note: DVD Audio Output The audio settings should conform to the actual audio system connections. Please refer to the Audio Setup in System Setup. AC POWER CONNECTION After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket. NOTE: Unplug the AC power lead from the wall socket if the unit will not be in use for a prolonged period of time. -11- System Setup Menu Operation 1. Press [ ]/[ ] to select an item you desire to set in the submenu, then press [ENTER] / [ ]to enter. Use [ ]/[ ] to select an option, then press [ENTER] to confirm it, or press [ ] to cancel. Then you can press [ ]/[ ] to continue to set other items in the submenu. Next time when you insert the same disc and close the disc tray to load the disc, the unit will play from the memorized point. OFF: Disable the last memory function. 2 AUDIO SETUP PAGE 2. 1 ANALOG AUDIO SETUP 2. 1. 1 DOWNMIX LT/RT: The 5. 1-channel audio is mixed into left channel and right channel and is output via the FL and FR speaker respectively. OFF: Pro Logic II processing is disabled AUTO: Pro Logic II processing is on only when Dolby Pro Logic II encoded content is detected. NOTE: When the Pro Logic II processing is turned off, all the following items (MODE, PANORAMA, DIMENSION and CENTER WIDTH) are unavailable. 2. 6. 1. 2 MODE This item is used to set the processing mode of Pro Logic II. MUSIC: The surround experience is tailored for multi-channel music playback. MOVIE: Emphasis is given to the center channel as two-channel audio is decoded and played back into your 5. 1 system. PRO LOGIC: This activates decoding and processing of the original Dolby Pro Logic processing with mono-surround channel. We recommend using the Dolby Pro Logic Movie mode in lie of this 4-channel surround format. AUTO: Automatically selects processing mode based on the input format. 2. 6. 1. 3 PANORAMA This item is used to turn on/off panorama mode and is available only when MODE is set to MUSIC. When panorama mode is turned on, the front stereo audio is partially fed into the surround channels for an enveloping effect. 2. 6. 1. 4 DIMENSION This item is available only when MODE is set to MUSIC. This item allows gradual adjustment of the sound field either towards the front or towards the rear. This is useful in setting a more even balance from all speakers with some rooms. 2. 6. 1. 5 CENTER WIDTH This item is available only when MODE is set to MUSIC. This item can be used to control the width of the center channel sound effect by blending the center speaker to the left and right speakers. [. . . ] - Copyright protection files on the USB memory device are skipped automatically when played back. - Recommended use: Flash memory type USB memory player - Not recommended: Hard disc memory type USB player - Some Flash memory player will not play successfully with this uint. Load a Disc Press [OPEN/CLOSE] to open the disc tray. Insert a disc with the label-side up, then press [OPEN/CLOSE] again to close the disc tray. If a single-sided disc is inserted upside-down, the disc tray will open automatically, if not, the unit will display "NO DISC". MP3 DISC PLAYBACK Insert an MP3 disc into the player, then a content menu will display on the screen. MENU OPERATION: Use the direction key [ ]/[ ] to select a folder or a file, then press [ENTER] to enter the selected folder or play the selected file. [. . . ]