User manual SANYO DSR-C100H80

[. . . ] INSTRUCTION MANUAL MANUEL D'INSTRUCTIONS MANUAL DE INSTRUCCIONES Digital Recording Camera Caméra d'enregistrement numérique Cámara de grabación digital DSR-C100 About this manual Before installing and using this unit, please read this manual carefully. À propos de ce manuel Avant d'installer et d'utiliser cet appareil, veuillez lire ce manuel attentivement. Assurez-vous de le garder à portée de la main pour référence ultérieure. Acerca de este manual Antes de instalar y usar este aparato, lea detenidamente este manual. Asegúrese de guardarlo a mano para futuras referencias. CONTENTS INFORMATION TO USER. . . . . . . . . . . . . . . . . . . . . . . [. . . ] SETTING NOW! MENU SET (INITIALIZE) PASSWORD: (HDD INITIALIZE) <SUSPICION SHOTS: 6834PCS> <ALARM TIME 45MIN> PRE ALARM POST ALARM INITIALIZE 15 MIN 30 MIN YES (HDD INITIALIZE) <SUSPICION SHOTS: 6834PCS> <ALARM TIME 45MIN> PRE ALARM 15 MIN POST ALARM 30 MIN INITIALIZE YES DO NOT POWER OFF!INITIALIZING NOW! SETTINGS screen (SETTINGS) CLOCK SET SYSTEM SET HDD SET SUMMER TIME/DAYLIGHT SET KEYWORD SET [MENU] (MAIN MENU) SET ABCDEFGHIJKLM NOPQRSTUVWXYZ 0123456789 BS END b Summer time/daylight settings (SUMMER TIME/DAYLIGHT SET) MODE ----------------- OFF (START) (END) WEEK 1ST LAST SUN SUN MONTH 04 10 HOUR 02 02 MINUTE 00 00 (SUMMER TIME/DAYLIGHT SET) MODE ----------------- ON (START) (END) START WEEK 1ST LAST 1ST SUN SUN SUN MONTH 04 10 04 HOUR 02 02 02 MINUTE 00 00 00 (SUMMER TIME/DAYLIGHT SET) MODE ---------------- ON (START) (END) END WEEK 1ST LAST LAST SUN SUN SUN MONTH 04 10 10 HOUR 02 02 02 MINUTE 00 00 00 b Keyword settings (KEY WORD SET) FILE ID :A CAMERA ID: COMMENT : CHANGE PASSWORD (DELETE) CHANGE PASSWORD (INITIAL) (KEY WORD SET) FILE ID : (KEY WORD SET) CAMERA ID: (KEY WORD SET) COMMENT : ABCDEFGHIJKLM NOPQRSTUVWXYZ 0123456789 BS END ABCDEFGHIJKLM NOPQRSTUVWXYZ 0123456789. , /-$&#'"() END ABCDEFGHIJKLM NOPQRSTUVWXYZ 0123456789. , /-$&#'"() END (CHANGE PASSWORD-DELETE) OLD PASSWORD: NEW PASSWORD: VERIFICATION: ABCDEFGHIJKLM NOPQRSTUVWXYZ 0123456789 BS END (CHANGE PASSWORD-INITIALIZE) OLD PASSWORD: NEW PASSWORD: VERIFICATION: ABCDEFGHIJKLM NOPQRSTUVWXYZ 0123456789 BS END English 21 SETTING THE CLOCK (CLOCK SET) You need to set the date and time in order to use the camera. The recording functions of this camera cannot be used if the date and time have not been set. In addition, if the accessory Ni-Cd battery (for backup) which is used for running the clock and for hard disk backups has been replaced, you must reset the clock. · The setting time is displayed when "CONDITION" is selected from the MAIN MENU screen. CONDITION TIME: 08/02/2002 15:34:26 PRE: 15MIN POST: 30MIN SUSPICION: 150/ 6834PCS FRAMERATE: 3FPS ST/DL: ON FILE ID: A ID: COMMENT: [MENU] (MAIN MENU) 5 6 7 8 9 Use the CURSOR (l) button to select "DAY . . . 01" and then use the CURSOR (d or c) button to set the day to "02". 00" and then use the CURSOR (d or c) button to set the hour to "15". 00" and then use the CURSOR (d or c) button to set the minutes to "15". 00" and then use the CURSOR (d or c) button to set the seconds to "20". MM/DD/YYYY" and then use the CURSOR (d or c) button to set the desired format. · YYYY/MM/DD: Year/Month/Day · MM/DD/YYYY: Month/Day/Year · DD/MM/YYYY: Day/Month/Year Note: The clock is set when the camera is first used, but if summer time has been set, the time will advance by one hour automatically during the summer time application period, so you may need to reset the clock. Setting example: To set the clock to 15:15:20 on 2 August 2002 Press the MENU button to return to the SETTING screen. 1 2 Use the CURSOR (l) button to select "SETTINGS" and then press the SET button. Use the CURSOR (l) button to select "CLOCK SET" and then press the SET button. The CLOCK SET screen will be displayed. (CLOCK SET) YEAR------------------2002 MONTH----------------- 08 DAY------------------- 02 HOUR------------------ 15 MINUTE---------------- 15 SECOND---------------- 20 FORM----------- MM/DD/YYYY CLOCK START----------- YES (CLOCK SET) YEAR------------------2001 MONTH----------------- 01 DAY------------------- 01 HOUR------------------ 00 MINUTE---------------- 00 SECOND---------------- 00 FORM----------- MM/DD/YYYY CLOCK START----------- YES 10 Use the CURSOR (l) button to select (Before setting) (After setting) 3 4 Use the CURSOR (l) button to select "YEAR . . . 2001" and then use the CURSOR (d or c) button to set the year to "2002". 01" and then use the CURSOR (d or c) button to set the month to "08". "CLOCK START . . . The CLOCK START screen will be displayed, and the date and time which have been set will appear on the screen. The camera will return to recording mode after approximately 30 seconds. If you select "NO", the clock setting will not be changed, and the screen will return to the SETTINGS screen. (CLOCK START) 2002/08/02 15:15:20 22 English SYSTEM SETTINGS (SYSTEM SET) Several different system settings can be made as indicated below. When these settings are made, the screen display appears as shown in the accompanying illustrations. 1 Setting the backlight compensation 2 Setting the front caution indicator to stay off during recording 3 3 Changing the frame rate for suspicion recording 4 Setting the overwriting conditions and warning displays or suspicion recordings Use the CURSOR (l) button to select "BLC CONTROL . . . OFF" and then use the CURSOR (d or c) button to select "ON". ON" and then use the CURSOR (d or c) button to select "OFF". [. . . ] Post-alarm (POST1) recording stops when the hold-up switch is released. 6 Post-alarm recording is stopped at 10:29:00. When the hold-up switch is released, "ALARM REC FULL" appears on the screen and recording stops. English 41 Screen displays 1 Display during recording · During recording, the screen display will switch off after 30 seconds have passed. You can make the screen display re-appear by pressing the SET or CURSOR button. · The screen display can be set to switch off immediately from the start of recording. [. . . ]