User manual SANYO DSR-3716HXXXC

[. . . ] Refer to the included CD-ROM for the French and Spanish "INSTRUCTION MANUAL". Utilisez le CD-ROM fourni pour consulter le "MANUEL D'INSTRUCTIONS" en français et en espagnol. Consulte en el CD-ROM el "MANUAL DE INSTRUCCIONES" en francés y en español. PRECAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Declaration of Conformity : DSR-3716/3709 : SANYO : SANYO FISHER COMPANY : 21605 Plummer Street, Chatsworth, California 91311 Telephone No. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ] Example: T-1 T-2 T-3 T-4 06:00 12:00 18:00 00:00 In the above example, T-4 (00:00) is skipped and T-3 operates between 18:00 and 06:00. Furthermore, when T-1 through T-4 are all set to "00:00", all but T-1 are ignored, and T-1 operates from midnight to midnight. <TIMER PERIOD SET> TIME PERIOD T-1 T-2 T-3 T-4 TIME PERIOD A 06:00 11:30 13:30 18:00 TIME PERIOD B 06:00 08:00 14:30 20:00 SELECT TIME PERIOD SEQUENCE MASK MOTION SENSOR TIME PERIOD A TIME PERIOD A TIME PERIOD A 3 4 Set the time period for "MASK" and "MOTION SENSOR" in the same way. Press the [EXIT/OSD] button. The setting procedure is ended and the display returns to the normal screen. Automatic selection, masking, and motion sensors are all set to "TIME PERIOD A" by default. EXIT/OSD Time period operations settings Example 2: Setting time period operation as follows. Automatic selection and monitor masking for "TIME PERIOD A". Motion sensing for "TIME PERIOD B". <TIMER PERIOD SET> TIME PERIOD T-1 T-2 T-3 T-4 TIME PERIOD A 06:00 11:30 13:30 18:00 TIME PERIOD B 06:00 08:00 14:30 20:00 SELECT TIME PERIOD SEQUENCE MASK MOTION SENSOR TIME PERIOD A TIME PERIOD A TIME PERIOD A As a result of the above operations, "SEQUENCE" are updated using main monitor and monitor 2 settings on P. 102; "MASK" are updated using mask settings from on P. 104; and "MOTION SENSOR" are updated using motion sensor settings on P. 81. English 59 3 RECORD SET Main Menu <MAIN MENU> 1. INITIAL SET 2. RECORD SET 3. GENERAL SET 4. SCREEN SET 5. POWER LOSS/USED TIME 6. INITIALIZATION LOG 7. COPY MENU SETTINGS -> -> -> -> -> -> -> FULL indicator ALARM FULL indicator [EXIT/OSD] button [MENU] button Shuttle dial CARD MOVE:JOG SELECT:SHUTTLE MENU RESET EJECT [CAMERA SELECT] buttons [TIMER] button Jog dial Setting WEEK SUN MON TUE WED THU FRI SAT DLY EXT START --:---:---:---:---:---:---:---:-***** <TIMER SET> STOP PROGRAM --:-OFF --:-OFF --:-OFF --:-OFF --:-OFF --:-OFF --:-OFF --:-OFF ***** OFF FPS 15 FPS 15 FPS 15 FPS 15 FPS 15 FPS 15 FPS 15 FPS 15 FPS 15 FPS SET OFF OFF OFF OFF OFF OFF OFF OFF OFF Settings for recording The <RECORD SET> is used to make the following settings. 6 <RECORD SET> 1. NORMAL REC EASY SET 2. RECORDING AREA SET 3. RECORDING CONDITIONS SET 4. NORMAL REC MODE SET 5. PROGRAM REC SET 6. TIMER SET 7. ALARM REC MODE SET 8. ALARM OPERATION SET MOVE:JOG -> -> -> -> -> -> -> -> Description <TIMER SET> Makes timer settings so that operations can be started at a specified time or on a specified day. Ref P. 74 SETTINGS 7 SELECT:SHUTTLE <ALARM REC MODE SET> ALARM RECORDING : OFF PICTURE QUALITY : ENHANCED AUDIO RECORDING : OFF ALARM INTERLEAVE : ONLY REC RATE: 15FPS, DURATION: 20SEC PRE-ALARM RECORDING : *** REC RATE: **** FPS, DURATION: **** => (01731 ALARMS CAN BE RECORDED) ALARM TRIGGER : ALARM MOTION SENSOR -> <ALARM REC MODE SET> Sets alarm recording, prealarm recording, and motion sensors. P. 77 Setting <NORMAL REC EASY SET> RECORDING DURATION BASE -> -> Description Ref 8 <ALARM OPERATION SET> ALARM RETRIGGER : OFF MAIN MON. DISPLAY ALARM PRIORITY MON. 2 DISPLAY : NC : LAST : OFF 1 REC RATE BASE CAUTION !CONNECT CAMERA AND SET TIME BEFORE SETUP <NORMAL REC EASY SET> Makes basic settings based P. 60 on a number of days or a rate. <ALARM OPERATION SET> Makes settings for operation P. 84 and display upon detecting an alarm. Normal recording easy setup 82GB 80 % 19 % 1% 2 <RECORDING AREA SET> TOTAL CAPACITY : NORMAL RECORDING AREA : AREA FULL RESET -> ALARM RECORDING AREA : AREA FULL RESET -> ARCHIVE AREA : AREA FULL RESET -> CAUTION : WHEN THE AREA SETTING IS CHANGED, THE WHOLE AREA WILL BE INITIALIZED ! <RECORDING AREA SET> Displays the total capacity of the hard disk. Sets the normal recording area, the alarm recording area, and the archive area. P. 64 Use the following procedures to make simple recording settings. Two different setting methods may be used -- one based on recording days; the other based on recording rate. 3 <RECORDING CONDITIONS SET> NORMAL RECORDING AREA OVERWRITE : ON ALARM RECORDING AREA OVERWRITE : ON REMAINING DISK WARNING SERIES REC AUTO DELETE : ** : OFF : OFF <RECORDING CONDITIONS SET> Sets whether overwriting is to be performed (by deleting old video) or recording is to be stopped P. 67 when any of the hard disk's recording areas become full. <NORMAL REC MODE SET> Sets the picture quality, audio P. 71 recording, the recording rate, and the program period. 4 <NORMAL REC PICTURE QUALITY AUDIO RECORDING REC RATE : 15FPS REC PROGRAM GROUP MODE SET> : ENHANCED : OFF ( 35H) : OFF <PROGRAM REC SET> PROGRAM : P-1 5 01: 05: 09: 13: SELECT 0. 5 0. 5 0. 5 0. 5 INDIVIDUAL CAMERA RATE(FPS) 02: 0. 5 03: 0. 5 04: 0. 5 06: 0. 5 07: 0. 5 08: 0. 5 10: 0. 5 11: 0. 5 12: 0. 5 14: 0. 5 15: 0. 5 16: 0. 5 NORMAL REC : 65H <PROGRAM REC SET> Sets program recording for cameras. P. 73 Before making easy setup settings, connect the camera(s) to the digital video recorder and then always perform "CAMERA DETECT". ( P. 54) When easy setup settings and individual settings are both set, the most recent settings override previous settings. Easy setup settings will be cancelled as a result of the following operations. (1) When the number of cameras detected using "CAMERA DETECT" is greater or less than the number of cameras previously stored in the digital video recorder. (2) When the setting for "PRE-ALARM RECORDING" from the <ALARM REC MODE SET> screen is changed. (5) When setting values are changed for normal recording or timer recording. (6) When the area is changed using the <RECORDING AREA SET> screen. 60 English 3 RECORD SET 1 Press the [MENU] button. Confirm that the number of cameras connected to the digital video recorder is the same as the number of displayed recording cameras. If this is not the case, check the wiring between cameras and the digital video recorder and then carry out "CAMERA DETECT". ( P. 54) The MENU indicator lights up and the <MAIN MENU> is displayed. MENU 2 Turn the jog dial to select "2. RECORD SET", and then turn the shuttle dial clockwise. 5 Turn the shuttle dial clockwise. <RECORDING DURATION BASE> RECORDING DURATION : 1 DAYS TIMER RECORDING(DLY) : OFF START --:-STOP --:-PICTURE QUALITY : ENHANCED AUDIO RECORDING : OFF NUMBER OF CAMERAS REC RATE :2 : 10 FPS/CAM K The <RECORD SET> screen is displayed. <RECORD SET> 1. NORMAL REC EASY SET 2. RECORDING AREA SET 3. RECORDING CONDITIONS SET 4. NORMAL REC MODE SET 5. PROGRAM REC SET 6. TIMER SET 7. ALARM REC MODE SET 8. ALARM OPERATION SET MOVE:JOG -> -> -> -> -> -> -> -> "1" flashes. SELECT:SHUTTLE 3 Turn the jog dial to select "1. NORMAL REC EASY SET", and then turn the shuttle dial clockwise. 6 Set RECORDING DURATION with the jog dial or numeric keys and turn the shuttle dial clockwise. <RECORDING DURATION BASE> RECORDING DURATION : 1 DAYS TIMER RECORDING(DLY) : OFF START --:-STOP --:-PICTURE QUALITY : ENHANCED AUDIO RECORDING : OFF NUMBER OF CAMERAS :2 : 10 FPS/CAM The cursor moves to "TIMER RECORDING (DLY)". The <NORMAL REC EASY SET> screen is displayed. <NORMAL REC EASY SET> RECORDING DURATION BASE REC RATE BASE -> -> CAUTION !CONNECT CAMERA AND SET TIME BEFORE SETUP REC RATE 7 Setting based on recording days Turn the shuttle dial clockwise. <RECORDING DURATION BASE> RECORDING DURATION : 1 DAYS TIMER RECORDING(DLY) : OFF START --:-STOP --:-PICTURE QUALITY : ENHANCED AUDIO RECORDING : OFF NUMBER OF CAMERAS REC RATE :2 : 10 FPS/CAM "OFF" flashes. 4 Turn the jog dial to select "RECORDING DURATION BASE", and then turn the shuttle dial clockwise. The <RECORDING DURATION BASE> screen is displayed with the cursor positioned on "RECORDING DURATION". [. . . ] 92 I INITIAL SET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 INITIALIZATION LOG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 Initializing the hard disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 IP ADDRESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]