User manual SANYO DS32224

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. WARNING: Unauthorized recording or use of television broadcast, video tape, film or other copyrighted material may violate applicable copyright laws. The manufacturer assumes no responsibility for unauthorized duplication, use or other acts that infringe upon the rights of copyright owners. CAUTION: To prevent electric shock, match wide blade of plug to wide slot of electrical outlet and insert fully. CAUTION: Changes or modifications not expressly approved by the manufacturer may void the user's authority to operate this VCR. Declaration of Conformity Model Number Trade Name Responsible party Address Telephone No. : : : : DS32224 Fisher SANYO FISHER COMPANY 21605 Plummer Street, Chatsworth, California 91311 : (818) 998-7322 Location For safe operation and satisfactory performance of your VCR, keep the following in mind when selecting a place for its installation: oe Shield it from direct sunlight and keep it away from sources of intense heat. [. . . ] If the automatic clock setup procedure enters the wrong time, make sure to select Off for the Clock adjust option. If set to Auto, an incorrect time will be entered again at the next automatic clock adjustment. NOTE: If the Automatic Clock Setting procedure set the wrong clock time, follow the steps under Automatic Clock Adjustment. NOTES: oe The Clock adjust option appears only when the clock has been set automatically. oe The automatic clock adjustment will not be performed if the power is on, or if a program timer recording is set to start within 5 minutes of the automatic clock adjustment times (2:55 AM - 3:05 AM and 5:55 AM - 6:05 AM). oe If using a cable converter/decoder, the automatic clock adjustment may not function properly. 20 SU4/UF2 (DS32224 GB) Tue. 09/1999 SETTING THE CLOCK Manual Clock Setting 1 Follow the steps in Before starting. If the clock has not yet been set, the Clock set menu appears. Standard/Daylight Time Adjustment The clock time can be easily changed to daylight saving time (by adding one hour) or standard time (by subtracting one hour). 1 Press the MENU button. The main MENU appears. 3 Press the CH/TRACK l (or j) button to select the Clock set option, then press the SET button. 2 Press the CH/TRACK l (or j) button to select the Clock set option, then press the SET button. The Clock set menu appears. YY@HH:MM 3 Press the CH/TRACK l (or j) button. Every time the CH/TRACK l (or j) button is pressed, 1 hour is subtracted (or added) to the displayed time. 4 When finished, press the SET button to save the settings. BASIC OPERATION [CLEAR]Cancel [MENU]Back@to@TV 4 Press the number buttons (0 ­ 9) to set the date and time. oe Date March 7: Year '00: Time 9:30: Select standard (or daylight saving time): PM: Press 0 ­ 3 ­ 0 ­ 7 Press 0 ­ 0 Press 0 ­ 9 ­ 3 ­ 0 Press CH/TRACK l or j Press 100/ENTER @Clock@set @03/07[Tue]2000@09:30PM [CH§]Day/STD@shift [100]AM/PM [CLEAR]Cancel [SET]OK NOTES: oe When entering the year, press the two number buttons that correspond to the last two digits of the year (i. e. oe If you press the wrong button, press the CLEAR button to erase the wrong number. If noise still appears: MANUAL TRACKING CONTROL 1 Press the VCR button on the remote control to select the VCR operation mode. 2 Press and hold the CH/TRACK l or j button (or CHANNEL on the front panel) during playback to eliminate the noise streaks from the picture. The automatic tracking control mode is canceled. To return to automatic tracking, eject the cassette, then reinsert it. 24 SU4/UF2 (DS32224 GB) Tue. 09/1999 RECORDING Before starting oe Turn on the power (TV and VCR). oe Press the VCR button on the remote control to select the VCR operation mode. oe If the VCR indicator is off, press the TV/VCR button on the remote control. Rec. List Super feature lets you keep track of all recordings you make on this VCR. The information automatically includes the channel number, date and start time. In addition you have an option to add the program type to the information list. List Super feature. The VCR indicator lights. oe Press the INPUT button on the remote control to select the tuner mode. (See "Recording Input Options". ) Recording One Program While Viewing Another 1 Follow the steps 1 ­ 3 in "RECORDING". 2 Press the TV/VCR button. The VCR indicator goes off. A channel number appears. oe Load a cassette. 3 Tune the TV to the channel you want to watch. BASIC OPERATION 1 Select a channel to record (on the VCR). [. . . ] Then use the REC button and/or the CH/TRACK l (or j) button to set the recording end time. oe Depending on the reception conditions of TV signal or remaining program duration, the AUTO QTR operation may not be accurate. 35 SU4/UF2 (DS32224 GB) Tue. 09/1999 CHILD LOCK With the Child Lock function on, the picture is blanked and the sound muted, virtually blocking the ability to view a videotape or TV program received through the VCR tuner. NOTES: oe Even when the child lock function is activated, timer recording and other functions can still operate normally. oe Since the child lock function can be activated or deactivated by remote control, you may wish to store the remote control in a secure location while the child lock function is activated. 1 Press the MENU button. The main MENU appears. 2 Press the CH/TRACK l (or j) button to select the VCR setup option, then press the SET button. The VCR setup menu appears. 3 Press the CH/TRACK l (or j) button to select the Child Lock option, then press the SET button to select the "On" position, as indicated by the "z". NOTE: Select the "Off" position to cancel the child lock function. 4 When finished, press the MENU button to exit the menu. While the child lock function is active, the message "Blocked" will appear on the TV screen. Ad JUMPTM The Ad JUMPTM feature allows you to skip through to the end of a commercial break at a faster speed and resume normal playback at the point when the program restarts. 1 During playback, press the Ad JUMP button when a commercial starts. Forward picture search begins. [. . . ]