User manual SANYO DS13330

[. . . ] For instructions about each piece of equipment or application software, please refer to the respective booklet. Chapter 2 Set up 2 PJ NETWORK MANAGER OWNER'S MANUAL Chapter 2 Set up PJ Network Manager installation 1 Set the supplied CD-ROM into the CD-ROM drive of your computer. exe icon in the "PJ Network Manager" folder in the CD-ROM. 2 Select "[English [United States]" from the pull- down menu on the "Choose Setup Language" window and click OK button to start installing and then follow the installation wizards. As the "Software License Agreement" will appear, read contents carefully and click Yes button if you agree with the license agreement to proceed with installing. Note: To install the software into the computer with Windows 2000, Windows XP or Windows Vista you should logon as administrator. Before installation, make sure that the other applications are closed, otherwise proper installation cannot be made. PJ Network Manager un-installation To remove the PJ Network Manager software from your computer, perform it with "Add & Remove Programs" on the control panel. Chapter 3 Basic Operation 3 PJ NETWORK MANAGER OWNER'S MANUAL Chapter 3 Basic Operation Launching and quitting PJ Network Manager To launch PJ Network Manager, take one of the following. - Select "PJ Network Manager" from the menu "Start" - "All programs". [. . . ] The target information window will appear and edit the contents, then click OK button. 0 The system information cannot be edited. 0 The interval of target monitoring is according to the setting of Monitoring interval on System default setting from System menu. (+p. 15) When happens the trap event on the target During the target monitoring, if the predefined event (trap) happens on the target equipment, the target sends the trap information to PJ Network Manager. The notify of the trap information is set up in the SNMP setting items of the target equipment. Projector has items such as "When PJ lamp is off", "When the life span of lamp is reached", "When internal PJ power circuit is failed" etc. For further trap information, refer to SNMP trap information in the separated booklet of the network owner's manual. What's Trap Trap is the event predefined by the SNMP agent. If the predefined event ( "When PJ lamp is off", "When internal PJ power circuit is failed" etc. ) happens, target sends trap information to the SNMP manager. PJ NETWORK MANAGER OWNER'S MANUAL 1 Chapter 3 Basic Operation Stopping monitoring the target To stop monitoring the target, click button again on the tool bar. Displaying all the status information of the target Select a target and click button on the tool bar. The following status window appears and displays all the available status information of the target. 0 The target name and item which have an abnormality or connection error happening are indicated with red. 0 When PJ Network Manager cannot acquire the value of column information, "---" is displayed. 1 0 The above procedure can perform by selecting Target display from Display menu. Setting up default setting Setting up default setting The monitoring information and e-mail information can be set up by the procedure below. 2 Switch by clicking Monitoring information or E-mail information tab for each setting. Monitoring information Monitoring information Items Description Monitoring interval . . . . . . . . . . . . . . . . Sets up the interval of the polling in minute unit. On the confirmation dialogue, click Yes to execute deletion. Event log information items Items Description Accrual date . . . . . . . . . Type of the Event (ALERT, TRAP, SYSERR ) (See table on the next page) Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . Type of the Event (See table on the next page) Warning column . . . . . . . . . . Warning column of the Event (See table on the next page) Warning value . . . . . Warning value of the Event (See table on the next page) Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 The order of the event log list can be changed temporarily by clicking the column name which you want to sort. It switches ascending or descending order by clicking the column name each time. 0 Column width can be changed by dragging the right edge of the column. Column cannot be deleted. PJ NETWORK MANAGER OWNER'S MANUAL 1 Chapter 3 Basic Operation Description of Event, Type, Warning column, Warning value Event Type Warning Column Connect Warning Value Un-connected Connected Acquisition error PowerFailuer TemperatureError(OnCoolingDown) TemperatureError NormalAfterTempError RS232CFailure Power management(OnCoolingDown) Power management Shutter management(On cooling) Shutter management LampFailure(OnCoolingDown) LampFailure SignalIsInterrupted SignalIsInputted Description Power status ALERT ON : Abnormality has happened OFF : Abnormality has been cleared Input status Inside Temperature status (A to Abnormal C) External Temperature status Failure Lamp status (1 to 4) Replace Lamp time (1 to 4) Filter status Filter time Option Box filter status Option Box filter time (setting time) Clogged (setting time) Clogged Error (setting time) Failure Replace Normal(Standby) Normal(OnCoolingDown) PowerFailuer Power management Shutter management * Refer to the next page LampFailure LampReplace PowerOFF PowreFailure PowerManagement ShutterManagement TemperatureError SignalIsInterrupted TRAP LampReplacementTime FilterReplacementTime CloggedFilterWarning Lamp status (1 to 4) Power status Inside Temperature status (A to C) Abnormal External Temperature status Input status Lamp time (1-4) Filter time Filter status SignalIsInterrupted (lamp time) (filter time) Clogged (filter time) Clogged Error Error n/a OptionBoxFilterReplacementTi Option Box filter time me CloggedOptionBoxFilterWarnin g Option Box filter status OptionBoxError AutoPlayError SYSERR *MailError *MemoryError n/a n/a 0 For further details of each warning column and value, refer to the next page. Description of Event, Type, Warning column, Warning value Description of warning value Warning Column Connect Warning Value Un-connected Connected * Acquisition error Power failuer TemperatureError(OnCoolingDow n) TemperatureError NormalAfterTempError RS232CFailure Power management(OnCoolingDo wn) Power management Description Projector has been disconnected from the network Projector has been connected to the network PJ Network Manager could not acquire the MIB information from the equipment Projector turned off due to the power failure of the projector On Cooling down due to temperature error occurred Power status The projector turned off due to temperature error occurred Normal after temperature error occurred The RS-232C communication error occurred Cooling down after projector lamp was off with the power management function The power management function turned projector lamp off after projector lamp was off with the shutter Shutter management(On cooling) Cooling downfunction management Shutter management The shutter management function turned projector lamp off LampFailure(OnCoolingDown) Cooling down after the lamp failure occurred LampFailure The lamp failure occurred Normal(Standby) * Projector turned into standby normally Normal(OnCoolingDown) * On cooling down normally due to projector turned off SignalIsInterrupted SignalIsInputted * The signal was interrupted The signal was inputted again The projector turned off when the temperature was abnormally high When the lamp is on When the lamp failed to ignite. It reached user setting lamp replacing time Filter was clogged It reached user setting filter time Filter was clogged The option box filter had an abnormality It reached user setting option box filter time The error occurred during the auto image display PJ Network Manager could not send mail PJ Network Manager could not acquire the memory Input signal status Inside Temperature status (A to Abnormal C] External Temperature status Lamp status Lamp time Filter status Filter time Option Box filter status Option Box filter time (Auto play error) (Mail error) (System error) ON * Failure Replace (lamp time) Clogged (filter time) Clogged Error (filter time) Error n/a 0 The warning value with "*" in the above table shows the event when the alert has cleared, alert type is "OFF". 0 The column order and width of the event log window are saved to the registry of the computer. If it exceeds 1000 events, the oldest event is deleted and the latest event is added. [. . . ] Display position and size of the status list window Status list information . . . . . . . . . . . . Display status column, column width and column order Event log list information . . . . . Column width and order of the event log list Font set up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Font setting value (Type face, size and style) Registering the target information from the defined file at once Registering the target information from the defined file at once The PJ Network Manager provides a function to import the target information from the defined file at once. [. . . ]