User manual SANYO DRW-500

[. . . ] INSTRUCTION MANUAL DRW-500 DVD Video Recorder REMOTE CONTROLLER RB-DRW500 ® TM TM SANYO'S HELP-LINE Call the toll-free number below if you have any difficulties operating this product. 1-800-813-3435 (Weekdays: 7:30 AM - 4:00 PM Central Time) Please Read This Manual. We recommend that you read this manual carefully before connecting your DVD Video Recorder and operating it for the first time. Keep the manual in a safe place for future reference. 1AD6P1P2047--A DRW-500, Issue Number 2 English CONTENTS Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Call 1-800-813-3435 -E30- Audio Preparations (Audio ---> Digital Out & DRC) 1. See page E22. Setting "Digital Out" If the coaxial or optical DIGITAL AUDIO OUT jack is connected to the digital amplifier, you must set as follows: 1. Press [ENTER] (or [a]) to select the sub menu. Audio Setup Digital Out DRC Menu Play/Edit Disc Record Program Setup Menu 4 Recording Setup DVD Control b OFF 5 ON a General Video Audio AV Select Press SETUP to exit Press SETUP to exit Current selection 2. Press [b] to return to "Digital Out". Audio Setup Digital Out 5 Setting "DRC (Dynamic Range Control)" 1. Select "DRC". a OFF ON DRC Audio Setup Digital Out DRC 4 a OFF STD TV Press SETUP to exit Current selection 5. Press [p] or [o] to select "Digital Out" or "DRC". Press SETUP to exit Current selection 2. Press [ENTER] (or [a]) to select the sub menu. Audio Setup Digital Out DRC b OFF 5 STD TV SETUP 4, 5, a, b ENTER Press SETUP to exit Current selection 3. Press [p] or [o] to select "OFF, "STD" or "TV". OFF: Off position STD: When connecting the amplifier to the AUDIO OUT jacks (not DIGITAL AUDIO OUT jacks) TV: When using 3 or 4 channel on TV 4. Call 1-800-813-3435 Notes: · Press [b] again to return to "Menu" screen. · Press [SETUP] to close the screen. -E31- AV Select When the 1st AV input (AV1 IN) or 2nd AV input (AV2 IN) jacks are connected, you must set as follows: Setting "AV1 Select" and "AV2 Select" 1. Press [p] or [o] to select "AV1 Select" or "AV2 Select". AV1 Select: When AV1 IN jacks are used AV2 Select: When AV2 IN jacks are used 2. Press [ENTER] (or [a]) to select the sub menu. Preparations (AV Select ---> AV1 Select & AV2 Select) 1. See page E22. Menu Play/Edit Disc Record Program Setup Menu 4 AV Select AV1 Select AV2 Select b Video 5 S-Video Recording Setup DVD Control a General Video Audio AV Select Press SETUP to exit Current selection Press SETUP to exit 3. Press [b] to return to "AV1 Select" or "AV2 Select". 2. · Press [SETUP] to close the screen. AV Select AV1 Select 5 a Video S-Video AV2 Select Press SETUP to exit Current selection SETUP 4, 5, a, b ENTER Need help?Call 1-800-813-3435 -E32- Record Status The program timer switches the unit on and off to record a TV program at a preset time. You can program a total of 15 times slots to be recorded, during the next one-year period. These settings are retained in the program memory and will repeat as long as a recordable disc is loaded in the unit. See "SETTING THE CLOCK" on page E18. Setting "Record Time" Note: If you have set "Record Status" already, open "Record List" to check the list. Start End Record Time 08:31 09:31 Record Day 2004/05/01 Input Source Tuner TV 10 Record Mode SP Title 20040501 Press SETUP to exit Done Cancel Preparations (Record Status ---> Record Time, Record Day, Input Source, TV, Record Mode & Title) 1. [. . . ] Load a new DVD+RW or DVD+R disc. Timer recording does not start. The clock setting is not correct. The disc space is not enough. SERVICING: Should this product require service, refer to the SANYO AUDIO/ VIDEO limited warranty. If you do not have a convenient SANYO service station nearby, contact the SANYO dealer where you purchased the unit. Call 1-800-813-3435 -E60- MAINTENANCE WARNING: FOR YOUR PERSONAL SAFETY, BE SURE TO DISCONNECT THE AC POWER CORD BEFORE PROCEEDING WITH ANY MAINTENANCE OR CLEANING. [. . . ]