User manual SANYO DCSDTA200

[. . . ] · Trademark PJLink is a trademark applied for trademark rights in Japan, the United States of America and other coun-tries and areas. · NVIDIA, the NVIDIA logo, and 3D VISION are registered trademarks and/or trademarks of NVIDIA Corporation in the United States and other countries. · Each name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. 2 Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. u Large Screen in Limited Space Short focus lens allows you to project large images from short distance. (p. 15) u Digital Zoom (for Computer) The digital zoom function allows you to focus on crucial information during a presentation. [. . . ] · Zoom and Image Position Adjustment (p. 25) will be canceled when Custom is selected in the Screen menu. 38 Computer Input Custom adj . and the Custom adjustment menu is displayed on the screen, you can use the Point ed buttons to choose the item you want to adjust. Adjust Scale H, then the screen scale is automatically modified based on the aspect ratio. To save the scale or position, press the SELECT button at "Yes". Menu 4Note: · When no signal is detected, Normal is set automatically and Custom adj. · The adjustable range for Scale H/V and Position H/V is limited depending on the input signal. D . ZOOM +/­ Remote Control Digital zoom + Select Digital zoom +. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D. ZOOM e or the SELECT button on the remote control. The projected image can be also compressed by pressing the D. ZOOM d or the SELECT button on the remote control. To exit the Digital zoom +/­ mode, press any button except the D. ZOOM ed and the SELECT buttons. Use the Point ed buttons to select Image select and then press the Point 8 or the SELECT button. Use the Point ed buttons to select the desired item and then press the SELECT button. Image 3 Image Dynamic For viewing pictures in a bright room. Image 1- For viewing with the user preset image mode in the Image adjust Menu (See pages 44, 45). Image Select Menu 3 Video Input Image Adjustment 1 2 Press the MENU button to display the On-Screen Menu. Use the Point ed buttons to select the Image adjust and then press the Point 8 or the SELECT button. Use the Point ed buttons select the desired item and then press the SELECT button to display the adjustment dialog box. Use the Point 7 8 buttons to adjust the setting value. Image adjust Menu Contrast Press the Point 7 button to decrease the contrast; press the Point 8 button to increase the contrast (from 0 to 63). Brightness Press the Point 7 button to decrease the brightness; press the Point 8 button to increase the brightness (from 0 to 63). Color Press the Point 7 button decrease the intensity of the color; press the Point 8 button increase the intensity of the color (from 0 to 63). Tint Press the Point 7 8 buttons to adjust the tint value to get a proper color balance (from 0 to 63). white balance (Red) Press the Point 7 button to lighten red tone; press the Point 8 button to deepen red tone (from 0 to 63). white balance (Green) Press the Point 7 button to lighten green tone; press the Point 8 button to deepen green tone (from 0 to 63). [. . . ] The projector can not be turned on until cooling is completed and the POWER indicator stops blinking. When the projector is cooled down enough and the temperature returns to normal, the POWER indicator stops blinking and the projector can be turned on. indicator keeps blinking. ) The projector has been cooled down enough and the temperature returns to normal. If the projector is turned off again, unplug the AC power cord and contact the dealer or the service center for service and checkup. [. . . ]