User manual SANYO DCS-TS750

[. . . ] CAUTION: Changes or modifications not expressly approved by the manufacturer may void the user's authority to operate this equipment. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. Location For safe operation and satisfactory performance of your unit, keep the following in mind when selecting a place for its installation: Shield it from direct sunlight and keep it away from sources of intense heat. Avoid places with insufficient ventilation for proper heat dissipation. Do not place the unit on a carpet because this will block the ventilation holes. [. . . ] (1) (2) (3) (4) (5) SETTINGS <MAIN MENU 1> Line 7 2 Set the items in the "WEEK" and "START" columns. (1) Press the [ ] or [ ] button to change "TUE" to "WED", then press the [ ] button. (2) Press the [ ] or [ ] button to change "--" to "20", then press the [ ] button. (3) Press the [ ] or [ ] button to change "--" to "30", then press the [ ] button. (5) Press the [ ] or [ ] button to change "OFF" to "ON". 5 6 Press the [EXIT/OSD] button. (1) Press the [ ] or [ ] button to change "SAT" to "MON", then press the [ ] button. The display returns to the normal screen. Press the [TIMER] button. (2) Press the [ ] or [ ] button to change "--" to "10", then press the [ ] button. The TIMER indicator lights, and the recorder enters timer recording standby mode. (3) Press the [ ] or [ ] button to change "--" to "30", then press the [ ] button. 62 English 7 HOLIDAY SET <MAIN MENU 1> [MENU] button [ ] button [ ] button [ ] button [EXIT/OSD] button You can set specific dates as holidays to have the operation for Sunday used on those days also. Dates such as national holidays and company off days should be set as holidays when you want those dates to have the same security as Sundays. [Setting conditions] After completing timer settings for Sunday "SUN", make sure to switch "SET" to "ON". Press the [ ] or [ ] button to set "--" to "17". Day Month No. 4 5 Example: To set November 17 as a holiday After entering the setting, press the [ ] button. The cursor moves to "2". Repeat procedures 3 and 4 to set other holidays as needed. Press the [EXIT/OSD] button. 1 2 Press the [MENU] button. 6 7 The <MAIN MENU 1> screen appears. The display returns to the normal screen. Press the [ ] or [ ] button to select "7. HOLIDAY SET" and press the [ ] button. Press the [TIMER] button. The TIMER indicator lights, and the recorder enters timer recording standby mode. The <HOLIDAY SET> screen is displayed, with the cursor positioned on "1". English 63 8 \ ALARM REC MODE SET <MAIN MENU 1> [MENU] button [ ] button [ ] button [ ] button [EXIT/OSD] button Setting alarm recording Follow the procedures below to select the recording picture quality, recording method (i. e. , frame or field), audio recording, and recording rate for the alarm recording area. 5 Move the cursor to "FRAME/FIELD RECORDING" and press the [ ] button, then press the [ ] or [ ] button to change the setting. SETTINGS <MAIN MENU 1> 1 2 Press the [MENU] button. The <MAIN MENU 1> screen appears. Select "8. ALARM REC MODE SET" and press the [ ] button. [Settings] ( Setting FIELD FRAME The <ALARM REC MODE SET> screen appears. indicates default setting. ) Description Sets the recording method to field. Sets the recording method to frame. 6 3 4 Press the [ ] button. Move the cursor to "AUDIO RECORDING" and press the [ ] button, then press the [ ] or [ ] button to change the setting. "ENHANCED" flashes. Press the [ ] or [ ] button to select the picture quality. indicates default setting. ) Description Super Fine: 50 kB Fine: 42 kB Enhanced: 30 kB Normal: 22 kB Basic: 15 kB When this is set to "ON", the letter "A (indicating that audio will be recorded)" is displayed in front of "REC RATE", and the maximum number of images that can be recorded is displayed at the bottom of the screen. [Settings] ( Setting SUPER FINE FINE ENHANCED NORMAL BASIC 64 English 8 ALARM REC MODE SET [Settings] ( Setting OFF ON indicates default setting. ) Description Audio recording is not carried out Audio recording is carried out [Settings] Setting Description 60. 00 to 0. 03 FPS (for field recording) 30. 00 to 0. 02 FPS (for frame recording) 1 second to 15 minutes, *CC Sets the recording rate. "VIDEO LOSS!" is displayed when the camera image is interrupted. "VIDEO LOSS!" is not displayed, even when the camera image is interrupted. (7) Settings The <DISPLAY SET> screen lets you turn off the display of the date, time, or other information in the operation display area on the screen. [MENU] button [ ] button [ ] button [ ] button <DISPLAY SET> and <VIDEO LOSS SET> setting items (1) (2) (3) (4) (5) (6) (7) (1) (6) (5) 01-20-04 ALARM 0004 01: 06: 31 EN 10FPS SETTINGS <MAIN MENU 2> [ ] button [EXIT/OSD] button 1 2 (7) Press the [MENU] button twice. The <MAIN MENU 2> screen appears. Press the [ ] or [ ] button to select "1. DISPLAY/VIDEO LOSS SET" and press the [ ] button. The <DISPLAY/VIDEO LOSS SET> screen is displayed. 01- 20- 04 ALARM 0004 01: 06: 31 EN 10FPS (2) [Settings] ( Item (1) DATE (3) (4) indicates default setting. ) Setting ON OFF ON OFF ON OFF ON OFF ON OFF Description Turns on display of the date in the operation display area. Turns on display of the picture quality in the operation display area. Turns off display of the picture quality in the operation display area. Turns off display of the recording rate in the operation display area. Turns off display of the alarm count in the operation display area. 3 Press the [ ] and [ ] buttons to select the desired function, then press the [ ] button. The setting flashes. (2) TIME 4 5 6 68 (3) QUALITY REC RATE Press the [ ] and [ ] buttons to change the setting, then press the [ ] button. When you have finished making the settings, press the [EXIT/OSD] button. (4) ALARM (5) COUNT The display returns to the normal screen. English 2 RS-232C/RS-485 SET (when optional interface board is installed) <MAIN MENU 2> [MENU] button [ ] button [ ] button [ ] button [ ] button [EXIT/OSD] button Settings for RS-232C and RS-485 This section describes the settings to be made for communicating using an RS-232C or RS-485 cable. (A separately-sold option board will be required in such a case. ) When RS-232C is selected Connect a special RS-232C cable (sold separately) between this unit's RS-232C port and the PC. 1 PC RS-232C terminal Press the [MENU] button twice. The <MAIN MENU 2> screen appears. 4 2 Press the [ ] or [ ] button to select "2. RS-232C/RS-485 SET", and press the [ ] button. Select "RS-232C" and press the [ ] button. The cursor moves to "DATA SPEED". The <RS-232C/RS-485 SET> screen appears. 3 5 Press the [ ] button. ] or [ ] button to select Press the [ ] button, then the [ ] or [ ] button to select the "DATA SPEED". "RS-232C" flashes. [. . . ] Make any settings that are required such as selecting the printer and the number of copies to be printed, and then click [OK]. The main window will then be printed with the time stamp embedded in the image. 2 To print thumbnail images The title entered will appear underneath the printed image. Up to 10 entered titles can be saved and selected from a list. Click the thumbnail image to be printed so that it appears in blue, and then repeat procedure 1 above. 11/05/2004 18:56:10 3 To print several images all at once Hold down the [Ctrl] key on the keyboard, and then click on the images to be printed in the thumbnail window to select them. To select a contiguous range of images, hold down the [Ctrl] key and the [Shift] key simultaneously and then select the images. [. . . ]