User manual SANYO DCS-C60

[. . . ] PIN code lock functions prevents unauthorized use of the projector (pp. 47­48). Blackboard Function A blackboard can be used as a projection screen. (pp. 30, 37) *The board color is limited to Green. Logo Function The Logo function allows you to customize the screen logo. The Logo page identifies the owner of the projector (pp. 42, 43). Multilanguage Menu Display The Operation menu is available in 16 languages: English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Finnish, Polish, Hungarian, Romanian, Russian, Chinese, Korean, and Japanese (p. 41). Compact Design This projector is designed to be compact in size and weight. It is easy to carry and work anywhere you want to use. Switchable Interface Terminal The projector provides a switchable interface terminal. [. . . ] Use the Point ed buttons to move the red frame pointer to the desired level and then press the SELECT button. Dynamic Image Select Menu Move the red frame pointer to the desired level and press the SELECT button. For viewing pictures in a bright room. Image 1­4 User preset image in the Image Adjust Menu (p. 32). The image level being selected. 0 Computer Input Image Level Adjustment 1 2 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon. Use the Point ed buttons to move the red frame pointer to the desired item, and then press the SELECT button. Contrast Image Adjust Menu Image Adjust Menu icon Move the red frame pointer to the desired item and then press the SELECT button. Press the Point 7 button to decrease the contrast; press the Point 8 button to increase the contrast (from 0 to 63). Brightness Press the Point 7 button to decrease the brightness; press the Point 8 button to increase the brightness (from 0 to 63). White balance (Red) Press the Point 7 button to lighten the red tone; press the Point 8 button to deepen the red tone (from 0 to 63). White balance (Green) Press the Point 7 button to lighten the green tone; press the Point 8 button to deepen the green tone (from 0 to 63). White balance (Blue) Press the Point 7 button to lighten the blue tone; press the Point 8 button to deepen the blue tone (from 0 to 63). Sharpness Press the Point 7 button to decrease the sharpness of the image; press the Point 8 button to increase the sharpness of the image (from 0 to 15). " Press the SELECT button at Common or Reset, to display a confirmation box. Note: ·When no signal is detected, "Normal" is set automatically and the Aspect dialog box disappears. ·The adjustable range for Scale H/V and Position H/V is limited depending on the input signal. For zooming in and out the images Digital zoom + When Digital zoom + is selected, the On-Screen Menu disappears and "D. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D. ZOOM e button on the remote control. Digital zoom ­ When Digital zoom ­ is selected, the On-Screen Menu disappears and "D. The projected image can be also compressed by pressing the D. ZOOM d button on the remote control. To exit the Digital zoom +/­ mode, press any button except the D. ZOOM ed, SELECT, and Point buttons. To return to the previous screen size, select a screen size in the Screen Size Adjustment or select an input source from the Input Source Selection (p. 25) again, or adjust the screen size with the D. ZOOM ed buttons. Remote Control POINT buttons SELECT button D. ZOOM + button D. ZOOM - button Note: ·The panning function may not operate properly if the stored Mode in the PC Adjust Menu is used (p. 29). ·The minimum compression ratio is limited depending on the input signal or when the Keystone function is working. ·True, Full screen, and Digital zoom +/­ cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p. 26). ·Digital zoom +/­ cannot be selected when Full screen or True is selected. Video Input Input Source Selection (Video, S-Video) Direct Operation Press the INPUT button on the top control or VIDEO button on the remote control to select "Video. [. . . ] Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. We will advise you how to obtain service. The CE Mark is a Directive conformity mark of the European Community (EC). This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. safety standards against risk of fire, casualty and electrical hazards. Pixelworks ICs used. 5 Appendix Menu Tree Computer Input/Video Input Input Computer 1 RGB Component RGB( Scart ) Quit Computer 2 Video Go to System (1) Auto Video S-Video Quit Go to System (3) Go to System (3) Go to System (3) N/A - - - not applicable Go to System (1) Go to System (2) N/A Sound Sound Volume Mute Quit 0 - 63 On / Off Computer Input System (1) Mode 1 Mode 2 SVGA 1 ---Systems displayed in the System Menu vary depending on an input signal. PC Adjust Auto PC Adj. Total dots Horizontal Vertical Current mode Clamp Display area H Display area V Reset Mode free Image Adjust 0 - 31 Contrast Brightness Color temp. H-sync freq. [. . . ]