User manual SANYO DC-MX42I

[. . . ] Install the unit on a horizontal, flat and firm surface with good ventilation. Never block the vents which will cause malfunction resulting from overheating. This book is only a guide for user's operation, not a criterion for configuration. WARNING: The batteries shall not be exposed to excessive heat such as sunshine, fire or the like. [. . . ] NOTE: When the Pro Logic II processing is turned off, all the following items (MODE, PANORAMA, DIMENSION and CENTER WIDTH) are unavailable. 2. 6. 1. 2 MODE This item is used to set the processing mode of Pro Logic II. MUSIC: The surround experience is tailored for multi-channel music playback. MOVIE: Emphasis is given to the center channel as two-channel audio is decoded and played back into your 5. 1 system. PRO LOGIC: This activates decoding and processing of the original Dolby Pro Logic processing with mono-surround channel. We recommend using the Dolby Pro Logic Movie mode in lie of this 4-channel surround format. AUTO: Automatically selects processing mode based on the input format. 2. 6. 1. 3 PANORAMA This item is used to turn on/off panorama mode and is available only when MODE is set to MUSIC. When panorama mode is turned on, the front stereo audio is partially fed into the surround channels for an enveloping effect. 2. 6. 1. 4 DIMENSION This item is available only when MODE is set to MUSIC. This item allows gradual adjustment of the soundfield either towards the front or towards the rear. This is useful in setting a more even balance from all speakers with some rooms. 2. 6. 1. 5 CENTER WIDTH This item is available only when MODE is set to MUSIC. This item can be used to control the width of the center channel sound effect by blending the center speaker to the left and right speakers. As the level number increases, the center channel sound moves toward the left and right speakers. 2. 6. 2 REVERB MODE You can select a reverb mode in this item. -14- System Setup 2. 7 HDCD(High Definition Compatible Digital) HDCD (High Definition Compatible digital) is a patented encode/decode process for delivering the full richness and details of the sound from HDCD-encoded CDs. 2. 7. 1 FILTER You can set the digital filter to 2x, 1x or off. 2. 8 KARAOKE SETUP 2. 8. 1 MIC SETUP 2. 8. 1. 1 MIC Set this item to ON/OFF to switch on/off the connected microphone(s). 2. 8. 1. 2 MIC VOL Enter this item, then use direction key [ ]/[ ] to adjust the microphone volume. Press to open /close the disc tray. FUNCTION 1 4 7 2 5 8 0/10 3 6 9 10+ The digit keys can be used to input numbers or make selection of a track or a chapter, etc. Press to enter an item in the menu or to confirm and execute a selection. The direction keys can be used to move the highlight in the menu. ENTER SETUP Press to enter/exit the setup menu. GOTO This button is used to locate a position on a disc that you want a playback to begin from. Press this button, then use the direction keys and digit keys to set a specific track, disc time, track time, chapter, title, chapter time or title time of a disc to go to directly. Press this button to enter/exit the program menu with which you can playback the contents of a disc in your desired order. In the program menu, use the direction keys and digit keys to make a program list, then move the highlight to START and press [ENTER] to start program playback. Or, press to return to the normal playback from the fast forward, fast reverse playback, etc. Press once to pause a playback, then press [ ] to continue the playback; Press it twice to stop a playback and the disc will be reset to the starting point. Press to skip to the next chapter/track. PROGRAM STEP Press repeatedly to advance the video frame by frame. (Applies to DVD, VCD discs etc) ] to REPEAT Press repeatedly to switch the repeat modes. (Note: For VCD2. 0 disc, this function is invalid when PBC function is activated. ) -17- Basic Playback A-B You can repeat a specific section of a disc with this button. [. . . ] You can also use the digit keys to make selection of a folder to enter or a file to play. In the content menu, press [ ] to return to the upper menu; press [ ]/[ ] to turn over to the previous/next the menu page. [PROG]: Press repeatedly to switch between FOLDER playback mode and FILELIST playback mode. NOTE: During playback, [ ], [ ], [ ], [ ](press to stop the playback), [REPEAT], [A-B], [VOLUME+/-], [MUTE], [CH-LEVEL], [TONE], etc. [. . . ]