User manual SANYO DC-HT818

[. . . ] INSTRUCTION MANUAL DC-HT818 DVD HOME THEATER Contents For your Attention. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Features & Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10 System Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-16 Basic Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-22 Trouble shooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 -1- For Your Attention IMPORTANT NOTES Please read through this manual before making connections and operating this product. Switch off the unit and disconnect it from the AC power supply when it is not being used for a long time. (Plug, as the disconnected device entirely with power source, should keep in easy-tooperation in daily life. ) Don't install the unit in a place exposed to heating sources or direct sunshine. The apparatus shall not be exposed to dripping or splashing and any object filled with liquids, such as vases shall not be placed on it. [. . . ] YUV: Set video output in analog component video format if the component video outputs are used. P_YUV: Set video output as progressive YUV signals if the component video outputs are used. NOTE: If the video setting differs from the actual video connection, you may get no image or very poor image on the TV. In such case, you need reset this setting item for an appropriate video output mode or press [V-MODE] on the remote control until the output image becomes normal. 3. 2 COLOR SETTING 3. 2. 1 SHARPNESS There are three options (HIGH, MEDIUM and LOW) for you to choose in this item. 3. 2. 2 BRIGHTNESS, CONTRAST, HUE and SATURATION Enter these items respectively, use direction key [ ]/[ ] to adjust the value, then press [ENTER] to confirm it. 3. 2. 3 GAMMA There are four options (HIGH, MEDIUM, LOW and NONE) for you to choose in this item. 3. 2. 4 LUMA DELAY There are two options (0T and 1T) for you to choose in this item. 4 PREFERENCE PAGE If there's no disc in the disc tray or the disc tray is open , this item is available. -15- System Setup 4. 1 TV TYPE This product supports both NTSC (National Television System Committee) and PAL (Phase Alternating Line) television broadcasting standards. PAL : If the connected TV is PAL system, select this mode. The video signal of a NTSC disc will be output in PAL format. The output format of video signal will be in accordance with the video signal of the disc. NOTE: If a wrong selection is made, the viewing image will be very poor. In such case, you are supposed to change the option in this item to fix the error. 4. 2 PBC (Play Back Control) ON: Activate the PBC function. When playing a disc encoded with PBC function such as VCD 2. 0 disc, press [MENU] to return to the PBC menu. NOTE: This function only works with those discs encoded with PBC function . DVD, VCD1. 1, CD-DA and MP3 discs have no PBC menu. 4. 3 AUDIO, SUBTITLE and DISC MENU Select a preferred audio language, subtitle language and disc menu language in these items. You can also make selection of the audio language by using the [AUDIO], and the subtitle language with the [SUBTITLE] on the remote control. NOTE: If the selected language is not available for the currently playing disc, the disc's default setting will remain enabled. 4. 4 PARENTAL This item allows the user to set a maximum rating of the movies that can be viewed. Movies rated higher than the level set for the parental lock can not be viewed without inputting the correct password. What's more, to key in the correct password is needed to reset the level. NOTE: This function only works with those discs that have parental rating encoded into them. 4. 5 DEFAULT Enter to restore all the default settings except the settings in PARENTAL item and PASSWORD setup page. 5 PASSWORD SETUP PAGE 5. 1 PASSWORD MODE You can switch on/off the password function in this item. NOTE: You must key in the correct password and press [ENTER] to confirm before you change the option in this item. The default password is 136900. 5. 2 PASSWORD You can reset the password in this item. NOTE: The default password (136900) is always active even if the password has been reset. -16- Basic Playback STANDBY/ON Press to switch on the unit. Press it again to put the unit in standby mode. USB/SD Press repeatedly to switch to the available extra signal source USB or SD/CARD, or to return to the DVD mode. Press to open /close the disc tray. FUNCTION 1 4 7 2 5 8 0/10 3 6 9 10+ The digit keys can be used to input numbers or make selection of a track or a chapter, etc. Press to enter an item in the menu or to confirm and execute a selection. [. . . ] Please refer to the BASIC PLAYBACK chapter for details. MP3/CD OPERATION IMPORTANT INFORMATIONS - Copyright protection files cannot be played back. - Copyright protection files on a disc are skipped automatically when played back. -21- Basic Playback Tuner Operation The following buttons are used in tuner mode. Press [ FUNCTION ] to select tuner mode. AM/FM Press to switch between AM mode and FM mode. MO/ST Press to switch between Mono and Stereo reception of the broadcast signal in FM mode. After tuning in a new frequency, press [MEMORY], then select a preferred station by inputting the corresponding numbers to save it as a preset station. [. . . ]