User manual SANYO DC-DB10

[. . . ] No objects filled with liquids, such as vases, shall be placed on the apparatus. - The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains etc. No naked flame sources, such as lighted candles, should be placed on the apparatus. To be completely disconnect the power input, the mains plug of apparatus shall be disconnect from the mains. A t t e n t i o n s h o u l d b e d r a w n t o t h e environmental aspects of battery disposal. [. . . ] - When the mains lead is connected to the AC outlet, the unit will respond to commands from the remote controller. Selecting the sound mode (Remote control only) Press the SOUND button to select the sound mode matching the music to be listened to. The volume level appears by numbers (VOL MIN ~ VOL MAX) on the display. Selecting the mute mode (Remote control only) Press the MUTE button once. Turn on the power and resume the operation. Dynamic Bass Boost System Press the DBBS button to enhance the bass sound. Normal sound resumes. CD PLAY Use compact discs bearing the symbol shown below. In addition to conventional 12 cm CDs, this system can be used to play 8 cm CDs without an adapter. Notes on handling compact discs Do not expose the disc to direct sunlight, high humidity or high temperatures for extended periods of time. Fingerprints and dust should be carefully wiped off the playing surface of the disc with a soft cloth. Never use chemicals such as record cleaning sprays, antistatic sprays or fluids, benzene or thinner to clean compact discs. 1. Press the CD compartment lid (OPEN/CLOSE q portion) to open it, "OPEN" appears. (Place only one disc at a time. ) To start play from the desired track Select the track by using the e or f button, then press the i button. Temporarily stopping play Press the i button, elapsed playing time blinks on the display. Press the CD compartment lid (OPEN/CLOSE q portion) again to close it. "READING" blinks for several seconds, then the total number of tracks and total playing time appear. Each time the button is pressed, the display changes and scrolls over on the display in the following sequence: ALBUM( album name)vARTIST(artist name)vTITLE(music title). . . - After the information scrolls over, the playing display returns. 7 1465AUEnglish. indd 7 2008-7-28 10:00:20 LISTENING TO TAPE 1. After loading the cassette, push the cassette holder back into position. They may jam in the mechanism. Pause Press the K button to temporarily stop playback or recording. Press it again to resume operation. Fast forward and rewind Press the C or D button. When the end of the tape has been reached, automatic stop will be activated. Automatic stop system At the end of the tape while recording or playing back, the cassette deck stops automatically and the buttons are released. Be sure to press the N/Q button when the end of the tape has been reached. Example (When using C-60 tape): Press the N/Q button after approximately 2 minutes have elapsed under fast forward and rewind operation. LISTENING TO THE RADIO Automatic/Manual tuning 1. Automatic tuning Press the f or e button for at least 1 second to tune in a station. The unit will scan down or up the band and receive the next receivable station. Manual tuning Press the f or e button briefly until the desired frequency is displayed. [. . . ] To release the timer In power on mode, press the TIMER button once, disappears. Press the e or f button to set the hours. Sleep timer (Remote control only) The sleep timer automatically switches off the power after a preset time has elapsed. There are 9 time periods available: 90, 80, 70, 60, 50, 40, 30, 20, and 10 minutes. After several seconds, the original display returns, " z z " remains lit. [. . . ]