User manual SANYO CLT9839

[. . . ] Congratulations Your Sanyo 900-MHz COMPANDER PLUS cordless telephone is a fine-quality home communications product. It is carefully designed and produced by a world leader of consumer and industrial electronics equipment. With proper maintenance and care, it will provide you with years of enjoyment and convenience. Main features: 900-MHz Technology Superior Range - The use of 900-MHz frequency band for signal transmission between base and handset means greater communication range compared to conventional 43--49 MHz cordless telephones. [. . . ] You can view the list on the display by scrolling through it, and call back the caller shown on the list at the touch of a button. If neither caller's name or number is available, it will indicate the reason. The caller information display remains until you hang up or press a dialing button. Visual Call Waiting With Visual Call Waiting service and your CLT-9839, you will not have to interrupt your conversation for every new incoming call. The phone's LCD display shows you who's calling, even when you are on the phone. Call Waiting Options This new call management service will provide you with more choices on how to handle the second call when you are already on the phone. You can switch between 2 callers, have a 3-way conference call with both callers, send the second caller to your voice mail, or answer second caller with a prerecorded message asking them to hold the line. To answer a call at the base station: To answer a call using the handset speakerphone: 1 2 Press SPEAKER to answer a call. 1 2 Press The . indicator lights. END The SPEAKER indicator lights. Press SPEAKER again to hang up. Press to hang up. If the handset is on the base station, or any key also pressing TEL turns on the handset speakerphone. To adjust the speaker volume: Slide the VOLUME control foward you (LOW) or away from you (HIGH). This will also change the ringer volume level. To adjust the speaker volume: The handset speaker has 3 volume levels: HIGH/MIDDLE/LOW. Press v or wduring a call to increase or decrease the level. CAUTION When using the handsfree handset speakerphone, keep the speaker ( located on the back of the handset) away from your ear to prevent any damage to your ear. E22 E23 Caller ID service CALL DISPLAY EXAMPLES When a call comes in, the display may show one of the following: Alison McNab 416-421-8344 Alison McNab Caller ID service CALLERS LIST The callers list memory stores information on your 30 most recent callers. When you begin reviewing the list, a callers list header appears indicating how many new callers have called since your last review and how many callers are saved on the list. If a call is received after 30 callers have already been stored, the oldest item is bumped (dropped from memory). CALL REVIEW button Caller name and number. Caller number is not available. CALLERS LIST HEADERS L 416-421-8344 Long distance caller. Press a CALL REVIEW (v or w) button once to display the header. Alison McNab Long distance Long distance Long distance caller. No calls No callers stored in the list. Long distance caller that cannot be identified. Saved calls= 5 The callers list has five callers that have already been viewed. Unknown caller Call is from an area unable to provide the Caller ID service to your area. New calls= 2 Saved calls= 3 New calls=1 Bumped calls=1 The callers list has 2 new callers and 3 previously viewed callers (5 callers in total). Alison McNab L Private number Private name Private number No information available Indicates that the number is suppressed at caller's request. L means long distance caller. One new caller was received after the caller list memory saved 30 calls. The oldest item has been bumped from the list. Indicates that the name and the number are suppressed at caller's request. Indicates that your telephone could not read the number. DISPLAY LANGUAGE The display language is English or French selectable. To change to another language, see page E19. E24 E25 Caller ID service REVIEWING THE CALLERS LIST Caller ID service The callers list displays caller information in 3 pages in sequence: Name page CALL REVIEW button 1 Press a CALL REVIEW (v or w) button once to display a header. Number page Caller phone number 416-421-8344 *=Edit MENU= s Date page Caller name Alison McNab NO. 5 MENU= s Jun15 2:35pm 2X MENU=s 2 From a callers list header display, you can. . . Memory number (No. 1 is the oldest) Press w repeatedly to scroll the list starting from the oldest new call. Press v repeatedly to scroll the list starting from the most recent caller. Date and time of the call. If you are called repeatedly from the same number, the caller list keeps only the latest date and time, but indicates how many calls were made from the same number. New calls= 2 Saved calls= 3 New call 1 New call 2 No. 5 Header New calls= 2 Saved calls= 3 END Header To move from page to page Whenever press MENU (s), move to name / number / date. Oldest new call Most recent call New call 2 No. 4 End of New calls Most recent call Oldest new call END This appears when you have seen all the new calls received since your last review. End of New calls New call 1 Saved calls=5 Saved call 1 Saved call 2 Saved call 3 No. 2 End of New calls This indicates that you have now reviewed all items in the callers list memory. (If you press v , the display shows the last received item again. ) Oldest call on the list Saved call 3 Saved call 2 No. [. . . ] The equipment must also be installed using an acceptable method of construction. In some cases, the company's inside wiring associated with single-line individual service may be extended by means of a certified connector assembly (telephone extension cord). The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. [. . . ]