User manual SANYO CLT2422 INSTRUCTION MANUAL

[. . . ] CLT-2422E-NEW 7/16/02 9:08 AM Page 1 2. 4 GHz Cordless Telephone with Caller ID CLT-2418 CLT-2422 Instruction Manual Important Charge the handset battery for 12 continuous hours prior to first use. SANYO Canada Inc. www. sanyocanada. com CLT-2422E-NEW 7/16/02 9:08 AM Page 2 TABLE OF CONTENTS INTRODUCTION . Switching between speaker phone and handset Intercom and room monitoring . 38 The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product. 2 3 CLT-2422E-NEW 7/16/02 9:08 AM Page 4 INTRODUCTION Congratulations on your purchase of this Sanyo cordless telephone. [. . . ] Press CID to scroll through the Caller ID list from the oldest to the most recent. See Storing caller ID entries in directory below. Storing Caller ID entries in the directory Before storing a caller ID number, make sure the number appears in proper digits for your dialing area. For example, if the Caller ID number appears 1 - 4 1 6 - 2 2 2 - 5 5 5 5 but it is not a long distance number, press the 7-10-11 key until it 416-222-5555 shows 4 1 6 - 2 2 2 - 5 5 5 5 (without 1). Number Name The 7-10-11 key (or 7-10-11/HOLD key on the handset) lets you select how many digits of the number are displayed: 7 10 11 Caller ID list The incoming caller information transmitted from the phone company is received by your phone between the first and second rings and stored in the Caller ID list. If you answer a call before the second ring the caller information may not be stored. When the Caller ID list memory is full, a new call automatically NEW replaces the oldest call in memory. N E W appears on screen for calls received that have not been reviewed. Note: Check with your local phone company regarding name service availability. Important: You cannot receive Call Waiting Caller ID information while using the conference features. Long distance code 1 + 3-digit area code + 7-digit telephone number. Note: If a specific memory entry is longer than 15 digits, the first 15 digits show on the screen. If the memory location already contains Caller ID information, and REPLACE you want to replace the information, press MEM again. Press MEM again to confirm and save. 23 CLT-2422E-NEW 7/16/02 9:08 AM Page 24 CALLER ID FEATURES DIRECTORY Dialing a Caller ID number 1. Use the 7-10-11 key to show the phone number in proper digits if necessary. Deleting entries from the Caller ID list Use REDIAL/DEL to erase the entry currently shown on screen or all entries. Note: Deleting Caller ID entries on the handset and base is done separately. 4. You may store up to 20 numbers (up to 24-digits) in memory for quick dialing. The directory locations for the base and handset are separate, with 10 memory locations for each. This directory feature is in addition to the 40 Caller ID list. Storing a name/number in the directory The phone must be OFF (not in TALK mode). 5. SELECT MEMO 1 - 0 Press the desired memory location (0 through 9) or use the CID or keys to find an empty memory location. For example, to enter the name Alice Roy: Press the 2 key once for the letter A. Note: The cursor will automatically move to the next position when another number key is pressed. Use the number keypad to enter the telephone number you want MEMO # to store (up to 24 digits). Press MEM again to store the number. To view your directory, press MEM and use CID or to scroll. 24 25 CLT-2422E-NEW 7/16/02 9:08 AM Page 26 DIRECTORY Inserting a pause in the dialing sequence Press PAUSE twice to insert a delay in the dialing sequence of a stored telephone number when a pause is needed to wait for a dial tone (for example after you dial 9 for an outside line, or to wait for a computer access tone). P shows on screen. Note: Make sure to press PAUSE twice to enter a pause. If you press PAUSE once while entering a directory name/number, it will enter a # (number sign). DIRECTORY Replacing a directory entry with a Caller ID entry. Press MEM again to confirm and save. 4. Reviewing and deleting directory contents 1. [. . . ] The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. connections themselves, but should contact the appropriate electrical inspection authority, or electrician, as appropriate. d. SANYO COMFORT WARRANTY Communications products not intended for Canadian usage or products without appropriate Canadian regulatory approvals. Accessory items including antenna, and batteries, Damage in or due to transportation. [. . . ]