User manual SANYO CDP244

[. . . ] SHOULD CONDENSATION OCCUR: The unit may not operate properly if condensation occurs. Wait for 1 to 2 hours (to allow the internal parts to adjust to the surrounding temperature) before using the unit. EN OP SANYO Canada Inc. www. sanyocanada. com 1 SAFETY TIPS LASER SAFETY THIS SET EMPLOYS AN OPTICAL LASER BEAM SYSTEM IN THE CD MECHANISM, DESIGNED WITH BUILT-IN SAFEGUARDS. EXPOSURE TO THIS INVISIBLE LASER LIGHT BEAM MAY BE HARMFUL TO THE HUMAN EYE. USE OF CONTROLS, ADJUSTMENTS OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS LASER LIGHT BEAM EXPOSURE. [. . . ] Unlike conventional records, compact discs have no grooves to collect dust and microscopic debris, so gently wiping them with a cloth should remove most particles. Wipe in a straight motion from the inside to the outside of the disc. Car Stereo COMPACT DIGITAL AUDIO Dirty. To keep the disc clean, do not touch the surface of the disc. EN OP LINE OUT Change the cord exit location (back or either side of the pack). Push the cord back into the slot. YES NO or Car Stereo Discs should be returned to their cases Never use chemicals such as record after use to avoid serious scratches that could cause the laser pickup to skip. Do not expose discs to direct sunlight, high humidity, or high temperatures for extended periods. Prolonged exposure to high temperatures can warp a disc. cleaning sprays, anti-static sprays or thinner to clean compact discs. Such chemicals can damage the disc. i The unit will not play a disc that has been inserted upside down or discs that do not EN OP conform to the Compact Disc standard. Also, the unit might not play discs that are scratched, soiled or carry fingerprints. i 3" (8-cm) CDs can be played without an adapter. LINE OUT 6 7 PLAYING A DISC Be sure to reduce the volume before plugging in or unplugging the headphones. Plug Slide the OPEN latch to release the CD PLAYING A DISC Close the lid and press the PLAY/PAUSE button( ). The disc will begin to spin, after a few seconds the display will indicate and the total number of tracks and total playing time on the disc, playing will begin automatically from track number 1. Adjust the volume. i BASS X BOOST i Digital ANTI-S function To stop play temporarily, press the lid. the cord from a pair headphones into the PHONES jack. of OPEN Hold the disc with the label side up button. i The elapsed playing time flashes in and press it onto the spindle until it "clicks" into place. the display. EN OP i Press the button again to resume. To stop play, press the STOP button . Press STOP again to turn power off. TRACK SEARCH Press the SEARCH buttons during play to skip to the desired track. Press the button to skip to the next track on the disc. Press the button to start at the beginning of the track currently playing. Press the button twice or more to skip to previous tracks. 8 9 PLAYING A DISC FORWARD/BACKWARD SEARCH Press and hold the or buttons during play to scan the disc at high speed. . . . . . . . . . . . . . . . . . Forward . . . . . . . . . . . . . . . . . Reverse If you press and hold the BASSXPANDER BASS X PANDER Use this function to increase the bass output. OFF BASS X ON BOOST button while playing, it will scan the track forward at high speed. If you press and hold the button while playing, it will scan the track backward at high speed. ANTI-SKIP PROTECTION The ultimate anti-skip protection keeps the music playing under virtually any conditions. It does this by using a new quick-focus laser, rapid-access mechanism and fast-read circuitry. i When the Anti-S button is pressed during play, the indicator appears in the display. Digital data equivalent to 300 seconds is stored in a "read ahead" memory buffer before it is decoded and played. i When the unit is subjected to a shock during play the data stored in memory continues to be decoded and played. This gives the pickup time to stabilize and continue reading new data. [. . . ] You, the original retail purchaser, are responsible for any costs of TRANSPORTING the product to and from SANYO Canada Inc. You also are responsible for the cost of any MAINTENANCE necessary in respect of the product. WARRANTY BECOMES VOID This warranty becomes void if the product's serial numbers are altered or removed or if any repair to the product is made other than by SANYO Canada Inc. Reserves the right to change or improve the design of the model of the product warranted hereunder without incurring any obligation to make any modifications to or to install any improvement in or on the product. [. . . ]