User manual SANYO AWM-2800

[. . . ] For safe and efficient operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Adjusting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The volume level appears by numbers (VOL 0 ~ VOL 24) on the display. Bass expander system (Remote control only) Press [BASS] to enhance the bass sound. "BASS" appears on the display. Surround sound system (Remote control only) Press [SURROUND]. "SURR" appears on the display and a "Wide" effect is created. Selecting the function Press [FUNCTION] to select the desired function. Each time the button is pressed, the display changes as follows: Cd v Tuner (FM) v Tuner (AM) v TAPE v Cd v . The function is automatically selected when CD play is started or when [TUNER/BAND] on the remote control has been pressed (except during recording). · When the function selection is changed, CD play is automatically stopped. Selecting the sound mode (Remote control only) Press [SOUND PRESET] to select the sound mode matching the music to be listened to. JAZZ: Jazz, etc. -E7- AWM-2800/US Eng page 8 4/16/04, 5:40 PM COMPACT DISC PREPARATIONS · This unit is designed to play compact discs bearing the identification logo below. Discs that do not carry this logo may not conform to the CD standard and may not play properly. · · · Discs should be returned to their cases after use to protect them from dust and scratches. To prevent warping the disc, do not expose it to direct sunlight, high humidity or high temperatures for extended periods of time. Do not apply paper or write anything on either side of the compact disc. · The number buttons on the remote control can also be used. To start play from the desired track Select the track by using [ E ] or [ F ], then press [ I ]. Using the remote control Press two number buttons within 2 seconds to select the track. (Example: press [0], then [3]. ) - TUNING + Temporarily stopping play Press [ I ]. Press [MEMORY]. Skip play Example: To skip to track 6 while track 3 is playing, press [ E ] repeatedly until "6" appears (in the track section) on the display. To skip back to track 3 while track 6 is playing, press [ F ] repeatedly until "3" appears. · The number buttons on the remote control can also be used for skip play. To skip to track 6 while one track is playing, press [0], then [6]. 4. Press [ I ] to start programmed play. - TUNING + When all programmed tracks have been played, the player stops automatically. · The program contents are retained in memory. Search (forward/reverse) If [ E ] or [ F ] is pressed during play, the player will search at high speed in the forward or reverse direction while the button is being pressed. When the button is released, normal play will continue. · · · The maximum number of selections that can be programmed is 20. If you try to enter more selections, "FULL" appears on the display. [. . . ] "0 ON" and "hour" display blink. AM ON To release the timer After turning the power on, press [CLOCK/TIMER] twice, "0" disappears. NOTE: The timer operation is released if a power failure occurs. 4. Call 1-800-813-3435 AM ON -E13- AWM-2800/US Eng page 14 4/16/04, 5:41 PM USING THE SLEEP TIMER (Remote control only) This timer automatically switches off the power after a preset time has elapsed. The volume will gradually be reduced (fade-out) during the 1-minute period before the unit turns off. [. . . ]