User manual SANYO AVM-3259G

[. . . ] For instructions about each piece of equipment or application software, please refer to the respective manual. Chapter 2 Set up 2 PJ NETWORK MANAGER OWNER'S MANUAL Chapter 2 Set up PJ Network Manager installation 1 Set the supplied CD-ROM into the CD-ROM drive of your computer. exe icon in the "PJ Network Manager" folder in the CD-ROM. 2 Select "[English [United States]" from the pull- down menu on the "Choose Setup Language" window and click OK button to start installing and then follow the installation wizards. As the "Software License Agreement" will appear, read contents carefully and click Yes button if you agree with the license agreement to proceed with installing. Note: To install the software into the computer with Windows 2000, Windows XP or Windows Vista you should logon as administrator. Before installation, make sure that the other applications are closed, otherwise proper installation cannot be made. PJ Network Manager un-installation To remove the PJ Network Manager software from your computer, perform it with "Add & Remove Programs" on the control panel. Chapter 3 Basic Operation 3 PJ NETWORK MANAGER OWNER'S MANUAL Chapter 3 Basic Operation Launching and quitting PJ Network Manager To launch PJ Network Manager, take one of the following. - Select "PJ Network Manager" from the menu "Start" - "All programs". [. . . ] Select Group setting from Target menu, the dialog box will appear as the below figure. 2 Select a group, and then click OK button. 0 "---" will not set the group. 0 The projectors setting different network passwords cannot be set to the same group. It is 1 necessary for the projectors in the same group to set to the same password. Setting up the password of Telnet Setting up the password of Telnet The password of telnet can be set up by the procedure below. 1 Select a target which you want to set up the password of telnet from the status list. 2 Select Telnet setting from Target menu, Telnet setting dialog box will appear as the below figure. When multiple targets are selected, all the selected targets are set as the same password. 0 The initial setting is "0000". Setting commands batch processing for multiple targets The commands batch processing for multiple targets can be set up by the procedure below. 1 Select a target belonging to the batch processing group which you want to set, and select Commands batch processing from Target menu. The check box of Commands batch processing dialog box will be checked. The commands are carried out to all the targets of the same group. 0 The commands also work for the target which is not set to a group. PJ NETWORK MANAGER OWNER'S MANUAL 1 Chapter 3 Basic Operation Commands batch processing : Available Command Items Description Power ON/OFF . . . . . . . . . . . . . . . . . . . . . . . . . Sets up the Power ON or Power OFF. Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sets up the screen size. Chooses the running speed of cooling fans. Setting timer for targets The timer information for targets can be set up by the procedure below. 2 To export the alert information as text file (CSV file), click Export button. 0 Column width can be changed with dragging the right edge of the column. Column can not be deleted. Viewing the event log Viewing the event log 1 Click button on the tool bar. The event log display window appears and the events which have been happened on the targets are listed on this window as the below. 2 To export these events as text file (CSV file), click Export button. 3 To delete the event log, select the accrual date item you intend to delete by clicking and then click Delete button. On the confirmation dialog, click Yes to execute deletion. Event log information items Items Description Accrual date . . . . . . . . . Type of the Event (ALERT, TRAP, SYSERR ) (See table on the next page) Type . . . . . . . . . . . . . . . . . . . . . . . . . . . Type of the Event (See table on the next page) Warning column. . . . . . . . . . Warning column of the Event (See table on the next page) Warning value . . . . Warning value of the Event (See table on the next page) Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 The order of the event log list can be changed temporarily by clicking the column name which you want to sort. [. . . ] Display position and size of the status list window Status list information . . . . . . . . . . . . Display status column, column width and column order Event log list information . . . . . Column width and order of the event log list Font set up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Font setting value (Type face, size and style) Registering the target information from the defined file at once Registering the target information from the defined file at once The PJ Network Manager provides a function to import the target information from the defined file at once. [. . . ]