User manual SANYO AVL-209

[. . . ] Instruction Manual AVL-209 HD (high-definition)* LCD TV * HD Cable or Satellite receiver required. Before connecting, operating or adjusting this product, please read the manual completely. Call our HELPLINE 1-800-263-2244 for further assistance. SANYO Canada Inc. www. sanyo. ca Table of Contents Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Important Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Identification of Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Turning the Unit On and Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Memorizing the Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Basic Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Setting Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Adjusting Image in D-Sub mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Setting Sound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Other Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Viewing Closed Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Parental Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Important Information Thank-you for choosing SANYO. [. . . ] Adjust the screen resolution and settings on your computer to the required settings for this model: 1280 x 768 resolution with 60 Hz vertical scanning frequency (or refresh rate). Input Source Source-switch D-Sub 13 Turning the Unit On and Off Turning the Unit On and Off Turning On Insert the power cord into the wall outlet. The unit will be turned on and you will be ready to use its features. Turning Off With the power on, press the Power to turn off. button on the remote control Note: You can also use the Power button on the control panel on the main unit. Viewing the MENUs and Displays Your LCD TV has a simple, easy-to-use menu system that appears on the screen. The unit also lets you display the status of many of your LCD TV features. Viewing the MENUs 1 2 3 With the power on, press the MENU button on the remote control. You can press the MENU button repeatedly to return or exit the menu operations. Picture Picture Mode Brightness Contrast Color Tint Sharpness Normal 50 75 60 50 12 Move Select Menu to exit Note: · To clearly introduce the menu operations, this operation manual provides a description based on operation with the remote control. · When performing confirmation in MENU operation, you may press either ENTER or VOL+/- button. Displaying Status Information Press the DSP button on the remote; the unit will display current status information such as channel number, audio mode or signal source, etc. 14 Memorizing the Channels Your LCD TV can memorize and store all the available channels for both antenna and cable channels. After the available channels are memorized, use CH+/- to scan the channels. Selecting the Signal Source Before your LCD TV can memorize the available channels, you must specify the type of signal source that is connected to the unit. (i. e. , an antenna or cable system) 1 2 3 4 5 Press MENU to display the menu main page. If you connect cable, please select Cable. Auto Searching Source Cable Channel Skip On Fine Tune AFC On Frequency 55. 25 MHz Channel Off Off Move Select Menu to exit Auto Searching Source Cable Channel Skip On Fine Tune AFC On Frequency 55. 25 MHz Channel Off Off Move Select Menu to exit Storing Channels in Memory Automatically 1 2 Repeat steps 1~3 in [Selecting the Signal Source] to access Channel page. During the process of the Auto Search, you can press Menu to exit. Auto Searching Source Cable Channel Skip On Fine Tune AFC On Frequency 55. 25 MHz Channel Off Off Move Select Menu to exit Auto Searching CH No 11 Menu to exit Setting Auto Frequency Control (AFC) 1 2 3 Repeat steps 1~3 in [Selecting the Signal Source] to access Channel page. When the AFC is set to On, the unit will automatically tune the program frequency to provide the best possible picture and sound. Auto Searching Source Cable Channel Skip On Fine Tune AFC On Frequency 55. 25 MHz Channel Off Off Move Select Menu to exit 15 Memorizing the Channels (continued) Manual Fine Tuning 1 2 3 Repeat steps 1~3 in [Selecting the Signal Source] to access Channel page. Press VOL+/- to fine tune till the best possible picture and sound are obtained. If you fine tune a program manually, the AFC will be turned off automatically. Auto Searching Source Cable Channel Skip On Fine Tune AFC On Frequency 55. 25 MHz Channel Off Off Move Select Menu to exit Adding and Erasing Channels 1 2 3 4 Use number buttons to directly select a channel that will be added or erased. Repeat steps 1~3 in [Selecting the Signal Source] to access Channel page. Press ENTER or VOL+/- to select On or Off. Auto Searching Source Cable Channel Skip On Fine Tune AFC On Frequency 55. 25 MHz Channel Off Off Move Select Menu to exit When the item is set to on, the selected channel will be erased. The erased channels can not be selected by using the CH+/- buttons unless you use number buttons to input channel number directly. 16 Basic Operations Changing Channels Using the Channel Buttons (CH+ or CH-) Press the CH+ or CH- to change channels. Direct Accessing Channels Press the number buttons to go directly to a channel. To select a one-digit channel: press the 0-9 number buttons to input the channel number and press ENTER or wait for some seconds to go to the selected channel. To select a two-digit channel: press the 0-9 number buttons to input the channel number and press ENTER or wait for some seconds to go to the selected channel. To select a three-digit channel: press the 0-9 number buttons to input the channel number one by one, then the unit goes to the selected channel. Note: When you use the number buttons, you can directly select channels that were erased. [. . . ] Note: The marking or retained image on the LCD panel resulting from fixed image use is not an operating defect and as such is not covered by Warranty. This product is not designed to display fixed image patterns for extended periods of time. Cleaning and Maintenance To clean this unit, wipe with a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth dipped in a soap and water solution or a weak detergent solution. · Never use alcohol, paint thinner or benzine to clean this unit. [. . . ]