User manual SANUS WOODBROOK FURNITURE VIDEO STAND-WFV44

[. . . ] Assembly Instructions for Model: WFV44 Thank you for choosing Sanus Systems Woodbrook Furniture. The Woodbrook Furniture is constructed of real hardwood and resonance dampening MDF. Safety Warning: If you do not understand these directions, or have any doubts about the safety of the installation, please call a qualified contractor or contact Sanus at 800. 359. 5520 or www. sanus. com. [. . . ] Diagram 2 Detailed View o a arrow p Step 3: Add Stretchers Add the Front and Back Stretchers (o, p) to the Side Panel (u), by aligning the Cam Pin (a) with the hole which the Cams (b) point to and the Dowel goes into the adjacent hole. Tighten each Cam closest to the Side Panel in a clockwise motion until the stretchers are secured. Note: Front stretchers attach to the same side as the hinge holes are on. Detailed View Diagram 3 d u hinge holes a b p Step 4: Add Center Panel Press fit the Center Panel (w) against the Stretchers (o, p) so the Cam Pin (a) goes into the hole which the Cams (b) point to. Tighten each Cam in a clockwise motion until the Stretchers are secured to the Center Panel. Note: Make sure the hinge holes on the Center Panel are on the same side as the Front Stretchers. Detailed View Diagram 4 o a w hinge holes d Step 5: Add Stretchers Add the Front and Back Stretchers (o, p) to the Center Panel (w), by aligning the Cam Pin (a) with the hole which the Cams (b) point to. Tighten each Cam closest to the Center Panel in a clockwise motion until the stretchers are secured. Note: Front stretchers attach to the same side as the hinge holes are on. Diagram 5 Detailed View x a b hinge holes d p Step 6: Add Side Panel Press fit the Side Panel (v) against the Stretchers (o, p) so the Cam Pin (a) goes into the hole which the Cams (b) point to. Tighten each Cam in a clockwise motion until the Stretchers are secured to the Side Panel. Note: Make sure the hinge holes on the Side Panel are on the same side as the Front Stretchers. Detailed View Diagram 6 a hinge holes o v Step 7: Add Shelf Pins and Bottom Shelf Thread the Shelf Pins (e) into the bottom hole in the line of holes in each Panel (u, v, w). Add the Bottom Shelf (q) by inserting it into the assembly and press fit it onto the Shelf Pins. Detailed View Diagram 7 u w e q v Step 8: Add Top Gently tap a Dowel Pin (c) into the holes on the top of each Panel (u, v, w). Detailed View Diagram 8 n c g v Step 9: Prepare Doors Insert each Phillips Bolt (h) through the Door (s) and into the Door Handle (i). [. . . ] Repeat process until each Back Panel is secured with four Wood Screws. Detailed View Diagram 11 f x p Step 12: Hinge Adjustment for Woodbrook Door Each hinge Assembly is adjustable in multiple directions. Diagram 12 Side Adjustment Depth Adjustment Height Adjustment Sanus Systems 2221 Hwy 36 West, St. [. . . ]