User manual SANUS WOODBROOK FURNITURE AV STAND-WFAV66

[. . . ] Check carefully to make sure that there are no missing or defective parts. Our customer service representatives can quickly assist you with installation questions and missing or damaged parts. Replacement parts for products purchased through authorized dealers will be shipped directly to you. [. . . ] Diagram 4 Detailed View hinge holes v d b a p Step 5: Add First Center Panel Press fit the Center Panel (x) against the Stretchers (o, p) so the Cam Pin (a) goes into the hole which the Cams (b) point to. Tighten each Cam in a clockwise motion until the Stretchers are secured to the Center Panel. Note: Make sure the hinge holes on the Center Panel are on the same side as the Front Stretchers. Diagram 5 Detailed View o a hinge holes x d Step 6: Add Stretchers Add the Front and Back Stretchers (o, p) to the Center Panel (x), by aligning the Cam Pin (a) with the hole which the Cams (b) point to. Tighten each Cam closest to the Center Panel in a clockwise motion until the stretchers are secured. Note: Front stretchers attach to the same side as the hinge holes are on. Diagram 6 Detailed View x a b hinge holes d p Step 7: Add Second Center Panel Press fit the Center Panel (x) against the Stretchers (o, p) so the Cam Pin (a) goes into the hole which the Cams (b) point to. Tighten each Cam in a clockwise motion until the Stretchers are secured to the Center Panel. Note: Make sure the hinge holes on the Center Panel are on the same side as the Front Stretchers. Diagram 7 Detailed View o a x hinge holes d Step 8: Add Stretchers Add the Front and Back Stretchers (o, p) to the Center Panel (x), by aligning the Cam Pin (a) with the hole which the Cams (b) point to. Tighten each Cam closest to the Side Panel in a clockwise motion until the stretchers are secured. Note: Front stretchers attach to the same side as the hinge holes are on. Diagram 8 x a Detailed View d hinge holes o Step 9: Add Side Panel Press fit the Side Panel (w) against the Stretchers (o, p) so the Cam Pin (a) goes into the hole which the Cams (b) point to. Tighten each Cam in a clockwise motion until the Stretchers are secured to the Side Panel. Note: Make sure the hinge holes on the Side Panel are on the same side as the Front Stretchers. Diagram 9 Detailed View o w a Step 10: Add Shelf Pins and Bottom Shelf Thread the Shelf Pins (e) into the bottom hole in the line of holes in each Panel (v, w, x). [. . . ] Insert each Mid Shelf (r) into the assembly and press fit onto the Shelf Pins. Note: Diagram 14 is a Back View. Detailed View e v Diagram 14 x x r w Step 15: Add Back Panel Position each Back Panel (u) up against the assembly and thread a Wood Screw (f) through it and into the Back Stretcher (p). Repeat process until each Back Panel is secured with four Wood Screws. [. . . ]