User manual SANUS VLMF109

[. . . ] This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio or television communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment to an outlet on a circuit other than that to which the receiver is connected Consult the dealer or and experienced radio/TV technician for help All other brand names or marks are used for identification purposes and are trademarks of their respective owners. Do not use this product for any purpose not explicitly specified by Sanus Systems. [. . . ] Unplug this mounting system from the electrical outlet before cleaning. Use this mounting system only for its intended use as described in these instructions. Supplied Parts and Hardware Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the item to your dealer; contact Sanus Systems Customer Service. This product contains small items that could be a choking hazard if swallowed. hardware and procedures for multiple mounting configurations are included. When you see this symbol, choose the correct configuration to suit your needs. Wood Stud Mounting CAUTION: Avoid potential injuries or property damage!Tighten the lag bolts [26] only until the washers [25] are pulled against the wall plate [02]. If you need extra space to accommodate cables, recesses, or protrusions, see an installation option (5-2 or 5-3) that uses spacers. CAUTION: Use the shortest screw and spacer combination needed to accommodate cables, recesses, or protrusions. Using hardware that is too long may damage your TV's internal components. For TVs with 400 x 400 spacing, remove the support tubes and release the locking carriages before completing the bracket attachment step. After the brackets are attached to the TV, then resecure the locking carriages and insert the support tubes. Caution: In the automatic set up method, the mount will make contact with the wall or objects within the swivel range. Automatic set up With mount in the extended position, push and release the set up button (B) on the mount. When set up is complete, the mount will return to and stay in the home position. Manual set up Move the TV to the wall either by hand or by pressing the home key. Key to the desired left To set swivel limits, press and hold the swivel limit. Du ställer in vridningsgränser genom att trycka på och hålla ner knappen till önskad vridningsgräns till vänster. [. . . ] Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. [. . . ]