User manual SANUS VISIONMOUNT UNIVERSAL CABLE TUNNEL-VMCT

[. . . ] Assembly Instructions for model: VMCT Thank you for choosing a Sanus Systems VisionMountTM VMCT. [. . . ] Replacement parts for products purchased through authorized dealers will be shipped directly to you. Do not use this product for any purpose that is not explicitly specified by Sanus Systems. Sanus Systems can not be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use. Please call Sanus Systems before returning products to the point of purchase. Required Tools: Phillips screw driver Supplied Parts and Hardware: Some parts not shown as actual size* (2) Wall Plate - a* (2) Cover - b* (4) Lag Bolt - c (4) Anchor - d Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 7. 12. 05 Customer Service: 800. 359. 5520. See complementary Sanus products at www. sanus. com Step 1: Attach Wall Plate Make sure the Wall Plate is oriented so that the flat side is against the wall as shown in Diagram 1. Use the Wall Plate as a template to mark the two hole locations for the Lag Bolts (c) on the chosen stud. Drive each Lag Bolt through the Wall Plate and into the marked holes with a Phillips screw driver until tight. [. . . ] Diagram 2 b tab slot a Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 7. 12. 05 Customer Service: 800. 359. 5520. [. . . ]