User manual SANUS VISIONMOUNT UNDER CABINET MOUNT-VMUC1

[. . . ] Safety Warning: If you do not understand these directions, or have any doubts about the safety of the installation, please call a qualified contractor or contact Sanus at 800. [. . . ] Please call Sanus Systems before returning products to the point of purchase. Required Tools: Phillips screw driver, drill, 1/4 inch drill bit Supplied Parts and Hardware: Some parts not shown as actual size* Using a Phillips screw driver loosen the two flat head bolts from the cover and slide it down and away from the mounting plate. Mounting plate cover flat head bolts Step 2: Prepare Mounting Surface Use the base of the Mount Assembly (a) as a template to mark three holes in the cabinet in the desired location. Step 4: Attach flat panel display to mounting plate Make sure no power is supplied to the display before mounting the display!Once the Mount Assembly (a) is secured to the cabinet, align the appropriate slots in the mounting plate with the four mounting holes of your LCD display. Use either four M4 x 10 mm Bolts (d) or four M4 x 20 mm Bolts (e) with four . 5 inch Spacers (f) should only be used if there is an obstruction or the hole pattern is physically recessed on the back of the LCD panel. Using a Phillips screw driver, slightly loosen the Bolts (d, e) that secure the LCD panel to the mounting plate. [. . . ] Étape 6 : Réglage de la tension du support d'écran La tension du support d'écran (a) peut être ajustée en serrant ou en desserrant simplement le boulon de tension étiqueté au schéma 6 à l'aide de la clé Allen fournie (h). [. . . ]