User manual SANUS VISIONMOUNT LCD WALL MOUNT-VMF

[. . . ] Assembly Instructions for VISIONMOUNTTM LCD Wall Mount Model: VMF Thank you for choosing Sanus Systems wall mount furniture. [. . . ] Replacement parts for Sanus products purchased through authorized dealers will be shipped directly to you. If you are uncertain about the nature of your installation please consult a local contractor. Required Tools: Drill with 3/16" bit, Phillips screw driver Supplied Parts: (1) Wall Plate - a (1) TV Mount Plate - b (2) Glide - c (1) Carriage Bolt and Washer - d, e (1) Knob - f (2) Wall Mount Screw - g (4) M4 Bolt - h (1) Allen Key - i Mounting the Wall Plate: The Wall Plate (a) MUST be mounted to a wood stud. It is a good idea to verify where the stud is located with an awl or thin nail. Use the Wall Plate as a template to mark the two hole locations on the wall. Make sure these holes are aligned vertically and centered over the stud. Attach the Wall Plate to the wall using the two Wall Mount Screws (g) as shown in Diagram 1. Tighten the Wall Mount Screws until they protrude 1/4 inch from the wall. [. . . ] Once the Wall Plate slides down over the Wall Mount Screws, firmly tighten them with the Allen Key (j). [. . . ]